29 September 2025 in Journal of Failure Analysis and Prevention
28 October 2025 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
The durability of threaded fasteners is critical to chassis reliability. Conventional load spectrum editing often retains low-amplitude, high-cycle loads that extend test time without affecting preload. This study introduces an accelerated editing method that integrates the bolt critical load threshold with the S-transform to account for the loosening mechanism of fasteners. Road load data were collected under representative driving conditions, and the proposed method was used to remove non-damaging segments while preserving fatigue-relevant features. Simulation results show that the edited spectrum significantly shortens test duration while maintaining consistency with the original in statistical parameters, spectral distribution, and fatigue damage. The method improves testing efficiency and provides practical value for automotive durability evaluation, product development, and quality assurance.
30 September 2026 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
The operational reliability of automotive systems relies heavily on the structural integrity of chassis threaded fasteners. However, under dynamic road impacts, these fasteners frequently experience severe preload loss, leading to joint failures and structural degradation. This paper proposes a systematic framework to predict fastener loosening under vehicular conditions. First, analytical boundaries for frictional slip and localized plastic yielding are established. Next, a detailed finite element analysis (FEA) is conducted to uncover the loosening mechanisms. Results show that under a 1 g axial transient impact, stress concentrations propagate from the first to the second and third engaged threads within 8 ms. Furthermore, single transverse impacts induce a relative residual nut rotation of up to 15 mrad, triggering a combined degradation mode of rotational slip and cumulative plastic deformation. Based on these mechanisms, a nonlinear dynamic model is developed. This model directly links external accelerations to internal energy dissipation, enabling the cycle by cycle prediction of the residual clamping force. Finally, the framework is applied to a representative M12 Grade 8.8 chassis assembly using 1600 s measured road spectra cycles from the Dingyuan proving ground. The engineering evaluation reveals a strict tradeoff effect regarding the initial preload: while excessively high preloads suppress macroscopic slip, they exacerbate root plasticity, causing the clamping force to drop by over 20% prematurely. An optimal initial preload of 20 kN is identified, which balances frictional resistance and plastic damage, ensuring the clamping force remains above 80% of its initial value over the 5000 h design life. This study provides a strong theoretical basis and practical guidelines for the anti-loosening design of critical chassis components.
21 July 2026 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Bolted joints are critical for maintaining the sealing and internal contact pressure of automotive proton exchange membrane fuel cell (PEMFC) stacks. However, existing durability models typically assume static mechanical boundary conditions, neglecting the dynamic decay of clamping force induced by road excitation and its cascading impact on electrochemical performance. To bridge this gap, this study proposes a novel comprehensive degradation framework that explicitly couples vehicle-level vibration, fastener loosening dynamics, and functional layer damage mechanisms. Unlike traditional approaches, a system-level PEMFC model is integrated with a mixed fastener loosening model accounting for both frictional rotational slip and accumulated plastic deformation under real-world proving ground road spectra. The time-varying clamping force is mapped to the stress evolution within the stack, driving physics-based damage accumulation in the gas diffusion layer (GDL), membrane (PEM), and catalyst layer (CL). Numerical results reveal a non-linear sensitivity of stack life to preload: insufficient preload triggers rapid rotational loosening. In contrast, excessive preload accelerates thread plasticity, creating a mechanistic trade-off that defines a narrow optimal design window. Crucially, the study quantifies that moderate preload loss can lead to significant power capability reduction before any structural failure occurs. This work provides a pioneering quantitative tool for automotive engineers to optimize stack assembly strategies and predict on-board durability by linking chassis vibration directly to electrochemical aging.