Biosorption is an effective way of extracting heavy metal ions from aqueous solutions of various compositions. The brown algae, Cystoseria indica, when treated with sodium chloride, demonstrates significant capacity to extract cadmium and nickel, simultaneously, from aqueous solutions. The batch system was running over wide ranges of initial metal ion concentrations (5–150 mg/L), pH (2–6), adsorbent mass (1–4 g/L), and contact times (20–300 min), at a temperature of 25 °C. The results obtained when applying the system in these conditions exhibit higher removal capacities for cadmium than nickel. The optimal conditions of the biosorption process were found as the adsorbent mass of 1 g/L, initial concentration of adsorbates of 100 mg/L and pH of 6. The equilibrium data obtained are better described by the extended-Freundlich isotherm for nickel and cadmium. The maximum biosorption of nickel and cadmium in binary-metal-component system were 18.17 and 55.34 mg/g, respectively. The kinetic data derived from these experiments were evaluated with pseudo-first-order, pseudo-second-order and intra-particle-diffusion kinetic models. Kinetic examination of the equilibrium data derived from these models suggest that the adsorption of nickel and cadmium both follow the intra-particle-diffusion kinetic model.
26 March 2024 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
This study explores the development of new room-temperature NO2 sensors utilizing carbon nanofibers (CNFs), single-walled carbon nanotubes (SWCNTs), and their hybrids with reduced graphite oxide (rGO), fabricated via a facile drop casting method with varying concentrations of carbon/ethanol mixtures. The concentration-dependent relation of sensor response to NO2 has been found. Comprehensive characterization techniques, including electron microscopy, Raman spectroscopy, optical microscopy, and X-ray diffraction were employed to analyze the sensing materials. Our results reveal that CNFs exhibit superior sensitivity, reaching −1.32%/ppm at an optimal suspension concentration of 1.5 mg/mL, outperforming SWCNTs. The creation of hybrid composites, specifically CNFs/rGO and SWCNTs/rGO, further enhances sensing performance due to synergistic effects. Molecular dynamics simulations revealed increased adsorption behavior of the CNFs/rGO hybrid sensing material. The fabricated devices, based on all-carbon composites, are effective and energy-efficient platforms for NO2 detection, offering promising solutions for environmental monitoring, the chemical industry, and industrial safety applications.
11 October 2025 in International Journal of Hydrogen Energy