Investigations made to evaluate the site-effect characteristics and to develop a reliable site classification scheme have received paramount importance for the urban areas planning and reliable site-specific seismic hazard assessment. This paper presents a novel non-objective and data-driven approach for preliminary seismic site-specific classification maps using machine learning (ML) based on affinity propagation (AP) along with a selected set of representative horizontal to vertical spectral ratio (HVSR) curves inside King Saud University (KSU) campus, which is among the main areas in Saudi Arabia. Besides, the proposed model aims to overcome the clustering error due to the dependency of the interpreter’s experience. Measurements of the ambient vibrations were performed to cover the entire campus area by about 307 stations. Recording at each station lasted for 20 minute length and a sample rate of 128 Hz for each station to satisfy the criteria for reliable and unambiguous HVSR results. Frequency and amplification values were used for subsequent site classification by passing messages between data points. The obtained results illustrate that the microtremor spectral ratio can be a remarkably robust tool in determining site effects. Accordingly, the proposed methodology can assist the decision-makers to set the priorities of managing land uses, estimating the earthquake losses, conducting programs for reducing the vulnerability of existing structures, enforcing building codes, planning for emergency response and long-term recovery, and designing and implementing phases of new constructions.
An integrated geophysical survey was carried out in a new dwelling area at 15-May town, southeast Cairo, Egypt. The buildings in this area are intensively affected by dangerous cracks that cause structural instability. The survey aimed to image the shallow subsurface structures, including karstic features, and evaluate their extent, as they may cause rock instability and lead to cracking of the residential buildings. Resistivity profiling (2-D), using a dipole-dipole array and ground penetrating radar (GPR) surveys were carried out along seven parallel traverses extending about 150 meters between the buildings blocks. Additional measurements using a Schlumbereger array and very low frequency electromagnetic (VLF-EM) methods were conducted. The acquired data were processed and interpreted integrally to elucidate the shallow structural setting of the site. Integrated interpretation led to the delineation of hazard zones rich with karstic features in the area. Most of these karstic features are associated with vertical and sub-vertical linear features such as faults, fracture zones, and geologic contacts. These features are the main reason of the rock instability that resulted in potentially dangerous cracking of residential buildings.