A scheme to semi-analytically derive waters’ Secchi depth (Z_sd) from remote sensing reflectance (R_rs) considering the effects of the residual errors in satellite R_rs was developed for the China Eastern Coastal Zone (CECZ). This approach was evaluated and compared against three existing algorithms using field measurements. As it was challenging to provide the accurately inherent optical properties data for running the three existing algorithms in the extremely turbid waters, the new developed algorithm worked more effective than the latter. Moreover, with both synthetic and match-up data, the results indicated that the proposed algorithm was able to minimize some residual errors in R_rs, and thus could generate inter-mission consistent Z_sd results from two ocean color missions. Finally, after application of new model to satellite images, we presented the spatial and temporal variations of Secchi depth and trophic state in the CECZ during 2002–2014. The study led to several findings: Firstly, the Z_sd-based trophic state index (TSI) in the East China Sea first increased since 2002, and then gradually dropped during 2008–2014. Secondly, more and more waters within 30–35 m and 20–25 m isobaths were deteriorating from oligotrophic to mesotrophic type and from mesotrophic to eutrophic water, respectively, during 2002–2014. Lastly, the TSI increased on average 0.091 and 0.286 m per year respectively in Bohai Sea and Yellow Sea since 2002, and it might only take 14 and 67 years for Bohai Sea and Yellow Sea to deteriorate from mesotrophic to eutrophic water, following their current yearly deterioration rate and trophic trend. These results highlighted the importance to make some strict regulations for protecting the aquatic environment in the CECZ.

The Huanjing-2A/2B (HJ-2A/2B) satellites are China’s next-generation environmental monitoring satellites, equipped with four visible light wide-swath charge-coupled device (CCD) sensors. These sensors enable the acquisition of 16-m multispectral imagery (16m-MSI) with a swath width of 800 km through field-of-view stitching. However, traditional vicarious calibration techniques are limited by their calibration frequency, making them insufficient for continuous monitoring requirements. To address this challenge, the present study proposes a spectral-angle difference correction-based cross-calibration approach, using the Landsat 8/9 Operational Land Imager (OLI) as the reference sensor to calibrate the HJ-2A/2B CCD sensors. This method improves both radiometric accuracy and temporal frequency. The study utilizes cloud-free image pairs of HJ-2A/2B CCD and Landsat 8/9 OLI, acquired simultaneously at the Dunhuang and Golmud calibration sites between 2021 and 2024, in combination with atmospheric parameters from the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis v5 (ERA5) dataset and historical ground-measured spectral reflectance data for cross-calibration. The methodology includes spatial matching and resampling of the image pairs, along with the identification of radiometrically stable homogeneous regions. To account for sensor viewing geometry differences, an observation-angle linear correction model is introduced. Spectral band adjustment factors (SBAFs) are also applied to correct for discrepancies in spectral response functions (SRFs) across sensors. Experimental results demonstrate that the cross-calibration coefficients differ by less than 10% compared to vicarious calibration results from the China Centre for Resources Satellite Data and Application (CRESDA). Additionally, using Sentinel-2 MSI as the reference sensor, the cross-calibration coefficients were independently validated through cross-validation. The results indicate that the radiometrically corrected HJ-2A/2B 16m-MSI CCD data, based on these coefficients, exhibit improved radiometric consistency with Sentinel-2 MSI observations. Further analysis shows that the cross-calibration method significantly enhances radiometric consistency across the HJ-2A/2B 16m-MSI CCD sensors, with radiometric response differences between CCD1 and CCD4 maintained below 3%. Error analysis quantifies the impact of atmospheric parameters and surface reflectance on calibration accuracy, with total uncertainty calculated. The proposed spectral-angle correction-based cross-calibration method not only improves calibration accuracy but also offers reliable technical support for long-term radiometric performance monitoring of the HJ-2A/2B 16m-MSI CCD sensors.

LuTan-1 (LT-1) is China’s first L-band differential interferometric synthetic aperture radar system, comprising two multi-polarization SAR satellites, LT-1A and LT-1B. The satellite uses differential deformation measurement and interferometric altimetry technology to realize surface deformation monitoring and topographic mapping in designated areas. It has the characteristics of all-weather, all-time, and multi-polarization and can be applied to military and civilian fields. In order to further improve the accuracy of image geometric positioning, this paper analyzes the error sources of geometric positioning for the differential deformation measurement mode (strip 1) of the satellite service. The in-orbit data of three years since the launch (2022–2024) are selected to analyze the positioning accuracy and stability of the uncontrolled plane based on the corner reflector and active calibrator deployed in the calibration field. The experimental results show that the positioning accuracy of the satellite strip 1 image without a control plane meets the requirements of the in-orbit index and remains relatively stable. The geometric precision correction positioning accuracy after error source compensation is better than 3.0 m, providing a favorable support for the subsequent application.

LuTan-1(LT-1) is the first Chinese civil L-band satellite constellation for geohazard observation, comprising LT-1A and LT-1B satellites. By employing interferometric altimetry and differential deformation measurement technologies, it achieves high-precision topographic mapping and establishes sub-millimeter-level deformation monitoring capabilities. To meet the high-precision measurement requirements for applications such as topographic surveying and deformation monitoring, this study systematically evaluates four categories of image quality metrics—geometric, radiometric, and polarimetric characteristics, as well as orbital and baseline quality—based on in-orbit test data from the twin satellites. The test results demonstrate that all image quality indicators of the LT-1 SAR satellites meet the design specifications, confirming that the imagery can provide robust spatial technical support for applications including geological hazard monitoring, land resource investigation, earthquake assessment, disaster prevention and mitigation, fundamental surveying and mapping, and forestry monitoring.

Accurate quantification of methane (CH₄) emissions from individual point sources is essential for understanding localized greenhouse gas dynamics and supporting mitigation strategies. This study employs satellite-based point-source emission rate data from the Carbon Mapper initiative, combined with ERA5 meteorological reanalysis, to simulate near-surface CH₄ dispersion using a Gaussian plume model coupled with Monte Carlo simulations. This approach captures local dispersion characteristics around each emission source. Simulations driven by these emission inputs reveal a highly skewed, heavy-tailed concentration distribution (consistent with log-normal characteristics), where the 95th percentile (1292.1 ppm) significantly exceeds the mean (475.9 ppm), indicating the dominant influence of a small number of super-emitters. Sectoral analysis shows that coal mining contributes the most high-emission sites, while the solid waste and oil & gas sectors present higher per-source intensities, averaging 1931.1 ppm and 1647.6 ppm, respectively. Spatially, emissions are concentrated in North and Northwest China, particularly Shanxi Province, which hosts 62 high-emission sites with an average maximum of 1583.9 ppm. Sensitivity analysis reveals that emission rate perturbations produce nearly linear responses in concentration, whereas wind speed variations induce an inverse and asymmetric nonlinear response, with sensitivity amplified under low wind speed conditions (a ±30% change in wind speed results in more than ±25% variation in concentration). Under stable atmospheric conditions (Class E), concentrations are approximately 1.3 times higher than those under weakly unstable conditions (Class C). Monte Carlo simulations further indicate that output uncertainty peaks within 150–300 m downwind of emission sources. These results provide a quantitative basis for improving uncertainty characterization in satellite-based methane inversion and for prioritizing risk-based monitoring strategies.