In this work, pristine graphene oxide and its thermally reduced derivatives, rGO, were tested for the removal of triazines (atraton, prometryn, and atrazine) from water. The reduction process was optimized by means of design of experiments (DOE) coupled with response surface methodology (RSM), relying on the adsorption efficiency of the material. The optimal reduction conditions were calculated at a temperature of 110 °C maintained for 24 h; the mildest and simplest reduction protocol was chosen, as it allows in-air heat treatment with a common laboratory oven. The rGO samples were characterized before use, confirming a partial reduction process that, leaving intact most of the oxygenated functionalities on the graphene skeleton, may still allow favorable adsorption of pollutants through both hydrogen bonds and π–π interactions, which result from a large conjugated polyaromatic system. Triazine analyses were performed by high-performance liquid chromatography (HPLC); the data obtained from the adsorption isotherms were fitted with the Langmuir and Freundlich models, highlighting a slightly different adsorption behavior of atraton and prometryn compared with atrazine. Model outcomes were also used to support the hypotheses about the adsorption process.

Crocus sativus L. is largely cultivated because it is the source of saffron, a well-appreciated and valued spice, not only for its culinary use but also because of its significant biological activities. Stigmas are the main product obtained from flowers, but in addition, tepals, largely considered a waste product, represent a big source of flavonoids and anthocyanins. This study aimed to delve into the phytochemical composition of saffron tepals and investigate whether the composition was influenced by the extraction technique while investigating the main analytical techniques most suitable for the characterization of tepal extracts. The research focuses on flavonoids, a class of secondary metabolites, and their health benefits, including antioxidant, anti-inflammatory, and anticancer properties. Flavonoids occur as aglycones and glycosides and are classified into various classes, such as flavones, flavonols, and flavanones. The most abundant flavonoids in tepals are kaempferol glycosides, followed by quercetin and isorhamnetin glycosides. Overall, this review provides valuable insights into the potential uses of tepals as a source of bioactive compounds and their applications in various fields, promoting a circular and sustainable economy in saffron cultivation and processing.

Ultra-high performance liquid chromatography (UHPLC) coupled with diode array detection (DAD) was applied to improve separation and detection of mono- and bis-glucosyl esters of crocetin (crocins), the main red-colored constituents of saffron (Crocus sativus L.), and other polar components. Response surface methodology (RSM) was used to optimise the chromatographic resolution on the Kinetex C18 (Phenomenex) column taking into account of the combined effect of the column temperature, the eluent flow rate and the slope of a linear eluent concentration gradient. A three-level full-factorial design of experiments was adopted to identify suitable combinations of the above factors. The influence of the separation conditions on the resolutions of 22 adjacent peaks was simultaneously modelled by a multi-layer artificial neural network (ANN) in which a bit string representation was used to identify the target analytes. The chromatogram collected under the optimal separation conditions revealed a higher number of crocetin esters than those already characterised by means of mass-spectrometry data and usually detected by HPLC. Ultra-high performance liquid chromatography analyses carried out on the novel Luna Omega Polar C18 (Phenomenex) column confirmed the large number of crocetin derivatives. Further work is in progress to acquire mass-spectrometry data and to clarify the chemical structure to the newly found saffron components.

The photocatalytic degradation of linuron (3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea), a widely used herbicide and potential environmental contaminant, in irradiated titanium dioxide aqueous suspensions is investigated. The photocatalytic performance of two nano-sized materials prepared by a sol–gel process, and the influence on the degradation rate of some operational parameters, such as catalyst amount, pH of the medium and hydrogen peroxide concentration, are evaluated. Within the range of the explored experimental conditions, degradation of linuron in an aqueous suspension of TiO₂ at mg l⁻¹ contamination levels is described by a pseudo-first-order kinetic model, the apparent half-life time of the herbicide being about 30 min in optimal conditions. Based on the evolution of total organic carbon and the fate of inorganic species, the disappearance of linuron seems to be accompanied by its almost quantitative mineralization.