Composite engine fan blades are critical aircraft engine components, and their failure can compromise the safe and reliable operation of the entire aircraft. To enhance aircraft availability and safety within a condition-based maintenance framework, effective methods are needed to identify damage and monitor the blades’ condition throughout manufacturing and operation. This paper presents a unique experimental framework for real-time monitoring of composite engine blades utilizing state-of-the-art structural health monitoring (SHM) technologies, discussing the associated benefits and challenges. A case study is conducted on a representative Foreign Object Damage (FOD) panel, a substructure of a LEAP (Leading Edge Aviation Propulsion) engine fan blade, which is a curved, 3D-woven Carbon Fiber Reinforced Polymer (CFRP) panel with a secondary bonded steel leading edge. The loading scheme involves incrementally increasing, cyclic 4-point bending (loading–unloading) to induce controlled damage growth, simulating in-operation conditions and allowing evaluation of flexural properties before and after degradation. External damage, simulating foreign object impact common during flight, is introduced using a drop tower apparatus either before or during testing. The panel’s condition is monitored in-situ and in real time by two types of SHM sensors: screen-printed piezoelectric sensors for guided ultrasonic wave propagation studies and surface-bonded Fiber Bragg Grating (FBG) strain sensors. Experiments are conducted until panel collapse, and degradation is quantified by the reduction in initial stiffness, derived from the experimental load-displacement curves. This paper aims to demonstrate this unique experimental setup and the resulting SHM data, highlighting both the potential and challenges of this SHM framework for monitoring complex composite structures, while an attempt is made at correlating SHM data with structural degradation.
6 September 2021 in International Journal for Computational Methods in Engineering Science and Mechanics
A novel elastically coupled double beam (ECDB) finite element with superconvergent properties is developed to primarily study wave propagation in the bonded region of an adhesively bonded single lap joint. An ECDB element consists of two axial-flexural-shear coupled beams coupled with continuously distributed linear elastic springs. A general formulation applicable to both metals and composites is proposed. An exact solution to the static part of six-coupled governing equations of motion is obtained, which is then used to formulate exact stiffness and mass matrices. Consequently, the ECDB element thus formulated has superconvergent properties and is inherently free of shear locking. It is shown that merely a single ECDB element is sufficient to accurately capture the tip deflections of a cantilever double beam type geometry subjected to static loading, following which eigenvalue analysis is performed, and comparisons are made with the commercial finite element software—Abaqus. Further, wave propagation studies are carried out to demonstrate the efficiency of the element in evaluating ultrasonic wave responses across various metallic and composite ECDBs, and comparisons are made with Abaqus and frequency-domain spectral finite element (SFEM) model described in Paunikar and Goapalakrishnan (“Wave propagation in adhesively bonded metallic and composite lap joints modelled through spectrally formulated elastically coupled double beam element,” Compos. Struct., under review). Following this, wave propagation in symmetric metallic, geometrically asymmetric metallic, and symmetric laminated composite lap joints with strong and weak bonding is studied by employing two-noded Lagrangian frame elements to mesh the adherends and superconvergent elastically coupled double beam (SECDB) elements to mesh the bonded region. The results obtained from the superconvergent finite element (SCFE) simulations are compared with those given by Abaqus and SFEM. Lastly, the SCFE models for the cases of perfectly bonded aluminium and symmetric ply laminated composite are experimentally validated. We have shown that the SECDB element developed in this work may be used to efficiently carry out static and dynamic analysis in any symmetric or asymmetric bonded joint comprising of only metals or composites or a combination of the two. It is also demonstrated that various levels of adhesion in a bonded joint can be simulated by varying the coupling spring stiffness value. Additionally, the SECDB element may also be used to study other double beam like coupled structures, for instance, space platforms or dynamic vibration absorbers.
Structural Health Monitoring (SHM) techniques are key to monitor in real time the health state of engineering structures, where damage type, location and severity are to be estimated by applying signal processing and deep learning techniques to temporal signals measured by sensors coming from the structure under study. Among the most widely used signal processing techniques in the SHM community is the Matching Pursuit Method (MPM), which allows to extract key features from a measured signal. MPM simply consists in approximating temporal data as a sum of different terms composed of a delayed and scaled signal called atom. This signal decomposition approach is however limited to non-dispersive signals which is not the case when dealing with Lamb waves signals widely used in the SHM of thin structures. In this case, in addition of delays and attenuations, wave packed also endure dispersion caused by the fact that all the frequencies do not propagate at the same speed within the structures under study. In this context, an improved version of Matching Pursuit is proposed in the present work, which address the dispersion phenomena by decomposing a measured signal as delayed and dispersed impulse response of an atom, obtaining better features for Lamb wave measurements. The performance of the developed technique is tested for the approximation of real measured signals, showing its better performance compared to classical MPM, especially when dealing with dispersive signals. This improved signal decomposition can be very useful for SHM purposes.