To meet the demands of laser communication, quantum precision measurement, cold atom technology, and other fields for narrow linewidth and low-noise light sources, an external cavity diode laser (ECDL) operating in the wavelength range around 780 nm was set up with a Fabry–Pérot etalon (F–P) and an interference filter (IF) in the experiment. The interference filter type ECDL (IF–ECDL) with butterfly-style packaging configuration has continuous wavelength tuning within a specified range through precise temperature and current control and has excellent single-mode characteristics. Experimental results indicate that the output power of the IF–ECDL is 14 mW, with a side-mode suppression ratio (SMSR) of 54 dB, a temperature-controlled mode-hop-free tuning range of 527 GHz (1.068 nm), and an output linewidth of 570 Hz. Compared to traditional lasers operating at 780 nm, the IF–ECDL exhibits narrower linewidth, lower noise, and higher spectral purity, and its dimensions are merely 25 × 15 × 8.5 mm3 weighing only 19.8 g, showcasing remarkable miniaturization and lightweight advantages over similar products in current research fields.
Aiming to address the insulation and power supply challenges faced by electrical measurement in ultra-high voltage (UHV) environments, this study proposes and implements a nitrogen-vacancy (NV) center magnetic sensing system based on Power over Fiber (PoF) technology. The system adopts a high-voltage and low-voltage separation design, realizing the isolated transmission of electrical energy and the reliable recovery of measurement signals through an optical fiber link. The sensing unit on the high-voltage side is composed of NV center sensors, microwave excitation modules, and signal processing modules. Its power supply is provided by an independently developed high-power laser power converter (LPC) assembly via 830 nm optical fiber laser transmission. Under an optical input of 10 W, this assembly can achieve an electrical output of 4.88 W with a conversion efficiency of 48.9%. The experimental results show that the system can operate stably in a simulated UHV environment; by optimizing modulation parameters, the optimal magnetic measurement sensitivity reaches 6.1 nT/Hz1/2. This research provides a safe and reliable solution for the power supply and precise sensing of high-potential side equipment in UHV scenarios, and demonstrates the application potential of PoF technology in advanced sensing for power systems.