In the field of inter-satellite laser communication, achieving high-quality communication and compensating for the Doppler frequency shift caused by relative motion necessitate lasers with narrow linewidths, low phase noise, and the ability to achieve mode-hop-free tuning within a specific range. To this end, this paper investigates a novel external cavity diode laser (ECDL) with a frequency-selective F-P etalon structure, leveraging the external cavity F-P etalon structure in conjunction with an auxiliary filter to achieve single longitudinal mode selection. The laser undergoes linewidth testing using a delayed self-heterodyne beating method, followed by the testing of its phase noise and frequency noise characteristics using a noise analyzer, yielding beat spectra and noise power spectral density profiles. Furthermore, the paper introduces an innovative bidirectional temperature-scanning laser method to achieve optimal laser-operating point selection and mode-hop-free tuning. The experimental results showcase that the single longitudinal mode spectral side-mode suppression ratio (SMSR) is around 70 dB, and the output power exceeds 10 mW. Enhancing the precision of the F-P etalon leads to a more pronounced suppression of low-frequency phase noise, reducing the Lorentzian linewidth from the initial 10 kHz level to a remarkable 5 kHz level. The bidirectional temperature-scanning laser method not only allows for the selection of the optimal operating point but also enables mode-hop-free tuning within 160 pm.
To meet the demands of laser communication, quantum precision measurement, cold atom technology, and other fields for narrow linewidth and low-noise light sources, an external cavity diode laser (ECDL) operating in the wavelength range around 780 nm was set up with a Fabry–Pérot etalon (F–P) and an interference filter (IF) in the experiment. The interference filter type ECDL (IF–ECDL) with butterfly-style packaging configuration has continuous wavelength tuning within a specified range through precise temperature and current control and has excellent single-mode characteristics. Experimental results indicate that the output power of the IF–ECDL is 14 mW, with a side-mode suppression ratio (SMSR) of 54 dB, a temperature-controlled mode-hop-free tuning range of 527 GHz (1.068 nm), and an output linewidth of 570 Hz. Compared to traditional lasers operating at 780 nm, the IF–ECDL exhibits narrower linewidth, lower noise, and higher spectral purity, and its dimensions are merely 25 × 15 × 8.5 mm3 weighing only 19.8 g, showcasing remarkable miniaturization and lightweight advantages over similar products in current research fields.
Aiming to address the insulation and power supply challenges faced by electrical measurement in ultra-high voltage (UHV) environments, this study proposes and implements a nitrogen-vacancy (NV) center magnetic sensing system based on Power over Fiber (PoF) technology. The system adopts a high-voltage and low-voltage separation design, realizing the isolated transmission of electrical energy and the reliable recovery of measurement signals through an optical fiber link. The sensing unit on the high-voltage side is composed of NV center sensors, microwave excitation modules, and signal processing modules. Its power supply is provided by an independently developed high-power laser power converter (LPC) assembly via 830 nm optical fiber laser transmission. Under an optical input of 10 W, this assembly can achieve an electrical output of 4.88 W with a conversion efficiency of 48.9%. The experimental results show that the system can operate stably in a simulated UHV environment; by optimizing modulation parameters, the optimal magnetic measurement sensitivity reaches 6.1 nT/Hz1/2. This research provides a safe and reliable solution for the power supply and precise sensing of high-potential side equipment in UHV scenarios, and demonstrates the application potential of PoF technology in advanced sensing for power systems.
As the core component of inertial navigation systems, Fiber Optic Gyroscopes (FOG) are severely limited by temperature-induced zero-bias drift, which is synergistically affected by constant temperature and temperature change rate. Traditional model-driven methods (polynomial fitting, piecewise regression) rely on manual modeling and fail to characterize complex nonlinear thermal errors; reported machine learning methods (BP, CART-Bagging, Online-SVR, LSTM-RNN) have insufficient nonlinear feature extraction and temporal correlation capture capabilities, with drastically degraded performance in extreme thermal environments. This paper analyzes the FOG temperature drift mechanism, establishes a constant-variable temperature coupled drift model, and proposes a CNN-BLSTM compensation algorithm integrating CNN’s deep nonlinear feature extraction and BLSTM’s bidirectional temporal correlation mining capability. Experiments under -40℃~60℃ full temperature range with four heating/cooling rates (0.2/0.5/1/2℃/min) show that the proposed algorithm improves FOG zero-bias stability by over 91% (maximum 96.21%), reducing it to 0.2388°/h after compensation. Its performance is significantly superior to the traditional MLP model and all reported mainstream methods including BP, CART-Bagging, Online-SVR and LSTM-RNN, especially maintaining high robustness under extreme low temperature and rapid temperature change conditions, fully meeting the engineering requirements of aerospace and marine navigation.
As the core component of inertial navigation systems, Fiber Optic Gyroscopes (FOG) are severely limited by temperature-induced zero-bias drift, which is synergistically affected by constant temperature and temperature change rate. Traditional model-driven methods (polynomial fitting, piecewise regression) rely on manual modeling and fail to characterize complex nonlinear thermal errors; reported machine learning methods (BP, CART-Bagging, Online-SVR, LSTM-RNN) have insufficient nonlinear feature extraction and temporal correlation capture capabilities, with drastically degraded performance in extreme thermal environments. This paper analyzes the FOG temperature drift mechanism, establishes a constant-variable temperature coupled drift model, and proposes a CNN-BLSTM compensation algorithm integrating CNN’s deep nonlinear feature extraction and BLSTM’s bidirectional temporal correlation mining capability. Experiments under -40℃~60℃ full temperature range with four heating/cooling rates (0.2/0.5/1/2℃/min) show that the proposed algorithm improves FOG zero-bias stability by over 91% (maximum 96.21%), reducing it to 0.2388°/h after compensation. Its performance is significantly superior to the traditional MLP model and all reported mainstream methods including BP, CART-Bagging, Online-SVR and LSTM-RNN, especially maintaining high robustness under extreme low temperature and rapid temperature change conditions, fully meeting the engineering requirements of aerospace and marine navigation.
3 September 2025 in IEEE Photonics Technology Letters
This study presents the design and implementation of a Multiple-wavelength for compact, high-performance, and highly reliable external cavity diode laser (ECDL). The Multiple-wavelength lasers feature an innovatively optimized optical configuration and mechanical structure, eliminating moving parts and spring-loaded mechanisms commonly used in traditional designs, thereby significantly enhancing operational robustness. The component adopts a compact butterfly package with dimensions of 30 mm $\times 15$ mm $\times 10$ mm, which not only improves mechanical rigidity but also reduces sensitivity to environmental vibrations compared to conventional grating-based configurations. Experimental results demonstrate that the proposed ECDL structure, utilizing an interference filter combined with an etalon, exhibits broad wavelength versatility and can be extended to other wavelength bands, thereby expanding the applicability of semiconductor lasers. Benefiting from its outstanding performance metrics, this laser shows promising potential in atomic, molecular, and optical (AMO) physics experiments, including quantum sensing and cold atom trapping applications.