In this study, the persistent challenges of high surface roughness and large thickness of the re-solidified layer (RSL) and the heat-affected zones (HAZ) in short electric arc machining (SEAM) are confronted by a hybrid simultaneous SEAM and ECM (SEACM) technique. The SEACM is investigated in low conductivity NaCl electrolytes as the working medium with an additionally applied air pressure, which can meet the requirements of both SEAM and ECM. Firstly, the effect of feed rate and electrolyte conductivities on material removal rate (MRR), roughness, line profiles, and surface morphologies were studied. Later, the current-voltage waveforms, topographies, PSD curves, and dimensional accuracy at different feed rates and electrolyte conductivities were analyzed. The SEACM significantly reduced the roughness and the thickness of RSL and HAZ at an appropriately optimized electrolyte conductivity and feed rate. The developed technique provides the basis for transferring from rough machining to finishing in SEAM.
This paper investigates the laws governing the evolution of nanostructures on pre-patterned fused silica surfaces by energetic ion erosion. First, regular nanostructures are fabricated with the Focused Ion Beam (FIB) operating at optimized processing parameters. Then, as a function of the different ion fluences, the surface morphology evolution is studied on a surface with newly formed nanostructures. An experimental phenomenon of inter-transformation between nano-ripples and random dot-like structures is observed. In addition, the principles of the development of the nanostructures are analyzed theoretically. The simulation results fit well with the experiments. This work deeply studies the influence of the initial surface micro-morphology on the evolution of nanostructures, and is of great significance for the control of surface nanostructures generated by energetic ion sputtering.