This comprehensive study meticulously evaluated six probability distribution models for the compressive strength of 24 concrete blocks, 12 with metakaolin and 12 without addition. The models analyzed were Lognormal, Gamma, Normal, Weibull, Beta, and Exponential. For blocks with metakaolin, the Lognormal distribution presented the best fit, followed by Gamma, Normal, Beta, and Weibull, while the Exponential needed to be more adequate. In blocks without metakaolin, the Gamma distribution was the most efficient, followed by Normal, Weibull, Lognormal, and Beta, with the Exponential also inadequate. The model parameters were adjusted based on the resistance frequencies estimated for each group of samples. Thus, Lognormal and Gamma performed better in predicting compressive strength, depending on the presence or absence of metakaolin. The Exponential distribution, in turn, was considered inadequate in both cases.
5 April 2024 in Revista de Engenharia e Pesquisa Aplicada
Acidente de percurso é aquele que ocorre da residência para o local de trabalho ou deste para aquela, sendo de acordo com a legislação brasileira, considerado como acidente de trabalho. O número de acidentes no percurso casa - trabalho - casa cresceu 41,2%, entre 2007 e 2013 como foi verificado no Levantamento da Confederação Nacional da Indústria. O objetivo deste trabalho é analisar os dados de acidentes de trajeto registrados entre 2005 e 2015 no Brasil pelo Ministério do Trabalho e Previdência Social através da estatística, entre cinco distribuições de probabilidade, identificando a que melhor se ajusta a série histórica, de forma a compreender melhor a ocorrência de tais eventos. Os dados estudados neste trabalho foram obtidos através do Portal Dataprev de Dados Abertos. Com auxílio dos softwares Excel e PAST, foram realizados testes para as variáveis aleatórias discretas e as seguintes distribuições de Probabilidades: Normal, log-normal, beta, gama e Weibull. Para cada uma das distribuições, foram feitos três testes de aderência: Kolmogorov-Smirnov, Qui-quadrado e Anderson Darling, em que foi adotado o nível de significância de 5%. Verificou-se que a distribuição Beta foi a melhor que aderiu aos dados de acidentes, enquanto a distribuição Log-Normal foi a última colocada.
22 October 2023 in Journal of Building Engineering
Hydrated lime is widely incorporated into cement-based mortars to improve workability and fresh-state properties; however, its influence on hydration products and mechanical performance remains insufficiently understood. This study investigates the effect of hydrated lime content on the mechanical behavior and microstructural development of cement-based mortars after 28 days of curing. Eight mortar formulations, ranging from lime-free (1:0:6) to lime-rich (1:5:6) mixtures, including intermediate and modified proportions, were evaluated through compressive strength, flexural tensile strength, and consistency tests. The microstructural evolution was investigated using complementary techniques, including X-ray fluorescence (XRF), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG/DSC), and scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM/EDS). Increasing hydrated lime content improved mortar workability but was generally associated with reduced compressive strength under the curing conditions investigated. The combined characterization techniques indicated progressive modifications in the hydration products and phase assemblage, with increased calcium-rich phases, greater evidence of carbonation, and reduced continuity of the hydraulic matrix as the hydrated lime content increased. The observed microstructural changes were qualitatively consistent with the mechanical behavior of the mortars. The conclusions of this study are restricted to the 28-day curing period investigated, and further research is required to evaluate the long-term influence of hydrated lime on carbonation and durability-related properties. These findings contribute to a better understanding of the role of hydrated lime in cement-based mortars and provide experimental evidence for the optimization of mortar formulations.