Mohamed Jouini

Dr. Mohamed Jouini


Research Focus & Metrics

Academic Career Length

35Years (1992-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 June 2019 in Catalysts
Verified
Journal Article
Open access
PDF file
FMFatima Mousli
Fatima Mousli
ACAhcène Chaouchi
Ahcène Chaouchi
MJMohamed Jouini
Mohamed Jouini
FMFrançois Maurel
François Maurel
AKAbdelaziz Kadri
Abdelaziz Kadri
MOHAMED M. CHEHIMIMOHAMED M. CHEHIMI
MOHAMED M. CHEHIMI
Massive industrial and agricultural developments have led to adverse effects of environmental pollution resisting conventional treatment processes. The issue can be addressed via heterogeneous photocatalysis as witnessed recently. Herein, we have developed novel metal/semi-conductor/polymer nanocomposite for the catalyzed degradation and mineralization of a model organic dye pollutant in darkness. RuO2-TiO2 mixed oxide nanoparticles (NPs) were modified with diphenyl amino (DPA) groups from the 4-diphenylamine diazonium salt precursor. The latter was reduced with ascorbic acid to provide radicals that modified the NPs and further served for in situ synthesis of polyaniline (PANI) that resulted in RuO2/TiO2-DPA-PANI nanocomposite catalyst. Excellent adhesion of PANI to RuO2/TiO2-DPA was noted but not in the case of the bare mixed oxide. This stresses the central role of diazonium compounds to tether PANI to the underlying mixed oxide. RuO2-TiO2/DPA/PANI nanocomposite revealed superior catalytic properties in the degradation of Methyl Orange (MO) compared to RuO2-TiO2/PANI and RuO2-TiO2. Interestingly, it is active even in the darkness due to high PANI mass loading. In addition, PANI constitutes a protective layer of RuO2-TiO2 NPs that permitted us to reuse the RuO2-TiO2/DPA/PANI nanocomposite nine times, whereas RuO2-TiO2/PANI and RuO2-TiO2 were reused seven and five times only, respectively. The electronic displacements at the interface of the heterojunction metal/semi-conductor under visible light and the synergistic effects between PANI and RuO2 result in the separation of electron-hole pairs and a reduction of its recombination rate as well as a significant catalytic activity of RuO2-TiO2/DPA/PANI under simulated sunlight and in the dark, respectively.

29 June 2023 in Journal of Analytical and Applied Pyrolysis
Verified
Journal Article
Closed access
HBHermine Bayoka
Hermine Bayoka
YSYoussef Snoussi
Youssef Snoussi
ABArvind K. Bhakta
Arvind K. Bhakta
MGMohamed El Garah
Mohamed El Garah
Ahmed M. KhalilAhmed M. Khalil
Ahmed M. Khalil
MCMohamed M. Chehimi
Mohamed M. Chehimi

22 March 2022 in Colloids and Interfaces
Verified
Journal Article
Open access
PDF file
JOJessim Omiri
Jessim Omiri
YSYoussef Snoussi
Youssef Snoussi
ABArvind K. Bhakta
Arvind K. Bhakta
STStéphanie Truong
Stéphanie Truong
Souad AMMAR-MERAHSouad AMMAR-MERAH
Souad AMMAR-MERAH
MOHAMED M. CHEHIMIMOHAMED M. CHEHIMI
MOHAMED M. CHEHIMI
Immobilization of nanocatalysts on biochar is receiving unprecedented interest among material and catalysis scientists due to its simplicity, versatility, and high efficiency. Herein, we propose a new direct approach to obtain bimetallic copper/nickel nanoparticles loaded on olive stone biochar. The bimetallic-coated biochar and the reference materials, namely bare biochar, copper rich-loaded biochar, and nickel-loaded biochar, were prepared by pyrolysis from olive pit powder particles impregnated first with citric acid (CA) and then with copper and nickel nitrates at 400 °C under nitrogen flow. We employed citric acid in the process in order to examine its effect on the structural and textural properties of biochar supporting the metallic nanoparticles. Surprisingly, citric acid induced the formation of agglomerated or even raspberry-shaped bimetallic copper/nickel nanoparticles. Large 450–500 nm agglomerates of ~80 nm bimetallic CuNi NPs were noted for B-CA@CuNi. Interestingly, for biochar material prepared with initial Cu/Ni = 10 molar ratio (B-CA@CuNi10/1), the bimetallic NPs formed unusual nanoraspberries (174 ± 8 nm in size), which were agglomerates of individual 10–20 nm CuNi10/1 nanoparticles. The B-CA@CuNi and reference materials were characterized by Raman spectroscopy, scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and magnetometry. The B-CA@CuNi and B-CA@Ni materials could be efficiently attracted with a magnet but not B-CA@CuNi10/1 due to the low nickel loading. B-CA@CuNi was tested as a catalyst for the degradation of methyl orange (MO). Discoloration was noted within 10 min, much faster than a similar material prepared in the absence of CA. B-CA@CuNi could be recycled at least 3 times while still exhibiting the same fast catalytic discoloration performance. This paper stresses the important role of citric acid in shaping bimetallic nanoparticles loaded in situ on biochar during the slow pyrolysis process and in enabling faster catalytic discoloration of organic dye solution.

13 November 2013 in The Journal of Physical Chemistry Letters
Verified
Journal Article
Closed access
LYLei Yang
Lei Yang
Jinbao ZhangJinbao Zhang
Jinbao Zhang
YSYang Shen
Yang Shen
BPByung-Wook Park
Byung-Wook Park
DBDongqin Bi
Dongqin Bi
MJMohamed Jouini
Mohamed Jouini

22 April 2008 in Journal of Solid State Electrochemistry
Verified
Journal Article
Closed access
PDF file
MLMathieu Lazerges
Mathieu Lazerges
KCKathleen I. Moineau-Chane Ching
Kathleen I. Moineau-Chane Ching
SASalah Aeiyach
Salah Aeiyach
SCSaloua Chelli
Saloua Chelli
BPBrigitte Peppin-Donnat
Brigitte Peppin-Donnat
MJMohamed Jouini
Mohamed Jouini

18 November 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
LBLahcen Boubkr
Lahcen Boubkr
ABArvind K Bhakta
Arvind K Bhakta
YSYoussef Snoussi
Youssef Snoussi
CSCora Moreira Da Silva
Cora Moreira Da Silva
LMLaurent Michely
Laurent Michely
MOHAMED M. CHEHIMIMOHAMED M. CHEHIMI
MOHAMED M. CHEHIMI
The aim of the present work is to valorise the brewing industry’s waste, i.e., brewer’s spent grain (BSG), into functional biocarbon for environmental catalysis applications. In this context, cost-effective and environmentally friendly biochar support coated with in-situ-generated Ag-Cu nanocrystals, was developed via the wet impregnation of BSG biomass powder with copper (II) nitrate trihydrate and silver nitrate aqueous solution prior to pyrolysis at moderate temperature (500 °C). Small-size homogenously distributed Ag-Cu nanocrystals (≤80 nm) on the surface of the biochar (Biochar@Ag-Cu) were observed by field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). Elemental compositions were determined by X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray analysis (EDX). The crystalline nature of the nanoparticles was confirmed by X-ray powder diffraction (XRD). Information about the thermal stability of the materials and quality were obtained by thermogravimetric analysis (TGA) and Raman, respectively. The potentiality of the Biochar@Ag-Cu catalyst in the field of pollutant removal is demonstrated by taking methyl orange and methylene blue as model dyes. A kinetics study was performed and analyzed by UV–vis spectroscopy. Its highly active catalytic nature is proved by the complete mineralization of the methyl orange dye (100%) through oxidative degradation. The reusability of the catalyst has shown 96% removal efficiency after 3 cycles. The linear plot of −Ln (CA/C0) vs. time (R2 = 0.9892) reveals that the mineralization of the methyl orange dye follows pseudo-first-order kinetics (k = 0.603 × 10−2 min−1). A methyl orange + methylene blue dye mixture degradation study has revealed the faster kinetics of the present catalyst towards methylene blue degradation. The current study suggests that BSG Biochar@Ag-Cu can be a potential candidate in contribution towards SDG 6.