Electronic ignition system affects the electronic equipment of the vehicle by electric and magnetic fields. The measurement of radio electromagnetic interference originating from the ignition system affecting the audiovisual test bench was carried out with a variable speed of the ignition system. The paper presents measurements of radio electromagnetic interference in automobiles. In order to determine the level of electromagnetic interference, the audiovisual test bench was equipped with a set of meters for power consumption and assessment of the level of electromagnetic interference. Measurements of the electromagnetic interference level within the audiovisual system were performed on an experimental test bench consisting of the ignition system, starting system and charging system with an alternator and regulator.

This article provides a detailed review of the types of magnesium wheels available in the industry and the current methods of the wheels’ production. The past several years have seen a significant development of magnesium-based lightweight alloys employed as a structural material for modern light vehicles. Magnesium alloys are characterized by their low density while maintaining good mechanical properties. The use of these alloys in the industry enables vehicles’ weight reduction while increasing their technical parameters. The first part of the article presents the unique properties of magnesium alloys that determine the application of this material for lightweight vehicle wheels. The advantages of using magnesium wheels over aluminum wheels are also presented. Next, a classification of the types of magnesium wheels was made in regard to their construction, applications, and manufacturing methods. At present, magnesium wheels by construction can be classified according to their geometry as single parts or assembled parts. In reference to geometry, wheels can have different shapes: classic, multi-spoke, with holes, or with frames. Depending on the geometry used, magnesium wheels can have different parameters, such as their mounting hole spacing, wheel diameters, or rim width. Considering the applications in various industries, main distinctions can be made between magnesium wheels for automobiles, motorcycles, bicycles, and wheelchairs. Magnesium wheels can also be categorized in regards to the manufacturing methods: casting, machining, forging, and hybrid manufacturing. The second part of the article focuses on the analysis of magnesium alloy wheel-manufacturing technologies used in the industry and developed by research centers. This article discusses these manufacturing technologies in detail and indicates prospective directions for further development.

This article provides an overview of the materials used to manufacture magnesium wheels for light vehicles. The analysis was conducted with the aim of developing a new, efficient technology for molding magnesium alloy wheels for light vehicles from preforms cast into metal molds. The knowledge...

The article discusses the methodology of testing an alternator at a stand to determine its energy efficiency. The efficiency was calculated on the basis of the measurement of the electric power supplied to the drive motor and the power generated by the alternator, taking into account the mechanical and electrical losses of the motor and the belt drive. The efficiency of the machine as a three-phase synchronous generator, without rectifier and voltage regulator, was also determined in order to assess the influence of electronic components on the overall efficiency of the machine. The tests were performed for various rotational speeds and loads. Various physical factors and phenomena that have a negative impact on the efficiency of energy conversion in the vehicle electrical supply system are discussed.

The article discusses the influence of heat treatment and metal forming parameters on formability and the structure of the AZ91 cast magnesium alloy. The aim of the article is to determine the optimal parameters of homogenization and plastic deformation of sand castings made of the AZ91 alloy in...