As a reflective display technology, electrowetting displays (EWDs) have the advantages of a paper-like appearance, fast response speed, and full-color capability. However, the use of an overdriving voltage to improve the response speed of EWDs can cause fluctuations in display luminance, which manifest as glitches in the luminance change curve. In order to eliminate this luminance instability phenomenon, a new driving pulse is proposed, which consists of an overdriving phase, a switching phase, and a driving phase. Firstly, a simplified equivalent circuit model is proposed to apply a target voltage in the driving phase without break down of the hydrophobic insulating layer. Secondly, a COMSOL (Version 6.3) two-dimensional model is established to simulate the oil contraction process and conduct comparisons, so as to ensure the effectiveness of the overdriving pulse. Then, the overdriving phase is applied to improve oil response speed, and a linear function is used in the switching phase to alleviate glitch phenomena. Moreover, the influences of overdriving voltage, overdriving time, and linear switching time on the luminance curve are analyzed by charge trapping theory in order to obtain optimal performance. The experimental results show that the glitch phenomenon is eliminated effectively, and the luminance of the EWD is increased by 1.02% and 1.96% compared with the step switching pulse and PWM pulse, respectively, while the response time is shortened by 1.82% and 8.05% compared with the step switching pulse and PWM pulse, respectively.

Precise manipulation of two-phase flow in micro-confined electrowetting pixels is limited by contact angle hysteresis (CAH). To elucidate this non-equilibrium process, we establish a high-fidelity electrohydrodynamic (EHD) phase-field simulation framework. The model rigorously couples Navier–Stokes equations with molecular kinetic theory (MKT) to characterize energy dissipation at the three-phase contact line (TCL) and further integrates charge transport kinetics. Numerical results reveal CAH is driven by physical pinning and interfacial charge trapping, with the latter dominating interfacial retreat and causing significant residual displacement. Furthermore, analysis shows alternating current (AC) waveforms mitigate charge accumulation and promote depinning via micro-oscillations, minimizing the hysteresis loop compared to direct current (DC) waveforms. Additionally, an overdrive strategy utilizing a suprathreshold Maxwell stress pulse rapidly overcomes static friction. This strategy significantly improves transient dynamics, substantially reducing the time to reach 90% of the steady-state target from 19.6 ms (under standard DC waveform driving) to 7.4 ms. This work provides a comprehensive theoretical basis and design criteria for optimizing active driving strategies in optofluidic and digital microfluidic systems.