Waste tire rubber is commonly recycled by blending with other polymers. However, the mechanical properties of these blends were poor due to lack of adhesion between the matrix and the waste tire rubber. In this research, the use of electron beam irradiation and (3-Aminopropyl)triethoxy silane (APTES) on enhancing the performance of 50 wt% reclaimed tire rubber (RTR) blend with 50 wt% poly(ethylene-co-vinyl acetate) (EVA) was investigated. Preparation of RTR/EVA blends were carried out in the internal mixer. The blends were then exposed to electron beam (EB) irradiation at doses ranging from 50 to 200 kGy. APTES loading was varied between 1 to 10 wt%. The processing, morphological, mechanical, and calorimetric properties of the blends were investigated. The stabilization torque and total mixing energy was higher in compatibilized blends. Mechanical properties of RTR/EVA blends were improved due to efficiency of APTES in further reclaiming the RTR and compatibilizing the blends. APTES improved the dispersion of embedded smaller RTR particles in EVA matrix and crosslinking efficiency of the blends. Calorimetric studies showed increased crystallinity in compatibilized blends which corresponds to improved mechanical properties. However, the ductility of the blend was decreased due to increased interaction between EVA and APTES. Presence of APTES increased the efficiency of electron beam irradiation induced crosslinking which was shown through gel content analysis and Charlesby-Pinner equation.