The effect of particle size and oxidation degree of new carbon microfillers, based on coal pitch (CP) and petroleum pitch (PET) cokes, on the structure as well as thermal, mechanical, and electrical properties of the composites based on ultrahigh molecular weight polyethylene (UHMWPE) was investigated. The composites studied have a segregated structure of filler particle distribution in the UHMWPE matrix. It was found that composite with smaller CP grain fraction has the highest Young’s modulus and electrical conductivity compared to the other composites studied, which can be the result of a large contribution of flake-shaped particles. Additionally, conductivity of this composite turned out to be similar to composites with well-known carbon nanofillers, such as graphene, carbon black, and CNTs. Additionally, the relationship between electrical conductivity and Young’s modulus values of composites studied was revealed, which indicates that electrical conductivity is very sensitive to the structure of the filler phase in the polymer matrix. In general, it was established that the properties, especially the electrical conductivity, of the composites studied strongly depends on the size, shape, and oxidative treatment of CP and PET filler particles, and that the CP coke of appropriately small particle sizes and flake shape has significant potential as a conductive filler for polymer composites.

This work presents the results of a tribological examination of polymer matrix composites reinforced with carbon foams with different porosity. The application of open-celled carbon foams allows an easy infiltration process by liquid epoxy resin. At the same time, carbon reinforcement remains its initial structure, which prevents its segregation in polymer matrix. Dry friction tests, conducted under 0.7, 2.1, 3.5 and 5.0 MPa loads, show that higher friction load results in higher mass loss, but it strongly lowers the coefficient of friction (COF). The change in coefficient of friction is related to the size of the pores of the carbon foam. Open-celled foams with pores size below 0.6 mm (40 and 60 ppi), used as a reinforcement in epoxy matrix, allow to obtain COF twice lower than composite reinforced with 20 ppi open-celled foam. This phenomenon occurs due to a change of friction mechanisms. In composites reinforced with open-celled foams, general wear mechanism is related to destruction of carbon components, which results in solid tribofilm formation. The application of novel reinforcement, in the form of open-celled foams with stable distance between carbon components, allows the decrease of COF and the improvement of stability, even under a very high friction load.

Polyelectrolyte-based complexes have attracted attention, as the interaction of the oppositely charged components results in nanoparticle formation through an easy but highly efficient method, avoiding the use of strong solvents, extreme temperatures, and toxic chemicals. Sodium oleate (NaOL) is a widely used surfactant in the pharmaceutical industry due to its availability, eco-friendliness, and low cost. In the present study, the neutral-cationic block copolymer poly(oligo(ethylene glycol) methyl ether methacrylate)–b–quaternized poly(2-(dimethylamino) ethyl methacrylate) (POEGMA-b-Q(PDMAEMA)) is mixed with the anionic surfactant sodium oleate for the formation of nanoscale polyelectrolyte complexes through electrostatic interactions. Different weight ratios of copolymer to surfactant are studied. Then, the co-solvent protocol was implemented, and curcumin is successfully loaded in the formed particles for drug delivery applications. The size and morphology of the macromolecular complexes are examined via Dynamic Light Scattering (DLS) and Cryogenic Transmission Electron Microscopy (cryo-TEM). The methods that we have used have indicated that the polymer–surfactant complexes form spherical complexes, worm-like and vesicle-like structures. When curcumin was introduced, encapsulation was effectively achieved into micelles, giving rise to vesicle-like shapes. The success of curcumin encapsulation is confirmed by Ultraviolet–Visible absorption (UV–Vis) and fluorescence (FS) spectroscopy. POEGMA-b-Q(PDMAEMA)–sodium oleate polyelectrolyte complexes revealed promising attributes as efficient drug carrier systems for pharmaceutical formulations.