With the aim to solve the problem of the non-linear phenomenon of the satellite power system under the influence of the space environment factors, which threatens the stability of the power system, in this paper, the abnormal charging and discharging of solar arrays and solar array drive assembly (SADA) induced by the space plasma environment and accidental events, such as debris impact, and the non-linear behaviors of the solar array and load during the Earth eclipse are modeled and analyzed. On this basis, the hazard risk evaluations of the above non-linear phenomena are carried out, and the weak links of the satellite power system in the space environment are identified. The results show that the unexpected energy of the solar array will increase the current stress and power loss of the power device, resulting in S3R over-regulation. An SADA arc fault will reduce the power supply capacity of the solar array, damage the shunt regulator, and affect the quality of the bus. The non-linear behavior of the solar array and load during the Earth eclipse may damage the battery charge and discharge regulator, seriously affecting the stability of the power system.
2 February 2023 in IEEE Transactions on Power Electronics
Modular multilevel DC/DC converters (MMDC) have emerged recently for medium-voltage dc applications. Under single circulant modulation, the sub-module (SM) capacitor voltages in MMDC are found to be evenly divided only at some specific modulation coefficients. To obtain the inherent balance capability under all modulation coefficients and expand the application range of circulant modulation, a simple dual circulant modulation is proposed in this letter. On the basis of single circulant modulation, the self-balancing of the SM capacitor voltages is realized by using the additional switching patterns generated by a simple circulant permutation method. The theoretical analysis of the proposed method is presented, and the inherent balance capability of MMDC under the dual circulant modulation method is verified by experiments.
This paper presents a high-voltage step-up DC-DC converter with an active flexible loop based on the Boost topology. By combining interleaved technology, magnetic integration technology, and voltage doubling capacitor technology, the voltage step-up of the converter is improved, and the duty range of the converter is extended by introducing an active flexible circuit composed of MOSFETs, diodes, and resistors. In addition, a coordinated control strategy of “open loop flexible compensation—closed loop linear compensation” is proposed, which effectively limits the starting inrush current of the converter and improves the dynamic performance. In this paper, the steady-state model of the converter in different duty ranges and the control idea of the coordinated control strategy are analyzed in detail, and a test prototype with a maximum output power of 100 W is built. In the hardware experiment, the steady state of the proposed converter working in different duty ranges and the dynamic start of the converter are tested, which proves the effectiveness of the proposed controller and control strategy.