The paper is dedicated to the experimental studies and numerical modeling of the airflow in a 3D cylindrical bifurcation. The computations are performed with the standard k – ε turbulence model implemented in the ANSYS Fluid Flow (Fluent) code of Workbench 2021R1. The direct visualizations and the numerical results are corroborated, with the aim to investigate the evolution of the vortical structures and the distribution of the flow rate in the bifurcation.
The paper is concerned with experimental investigations and numerical simulations of airflow in a rigid model of human tracheal bifurcation during a respiratory cycle in the presence of cough. The main goal of the study is to calculate the velocity and tracheal wall shear stress (WSS) distributions under the time variation in the pressure difference. A sequence of inspiration-expiration of measured flow rates and pressure is used to calibrate the 3D unsteady numerical solutions for different imposed boundary conditions at the edges of the bifurcation. The experimental data are obtained using commercial medical devices: (i) a spirometer and (ii) a mechanical ventilator, respectively. CT images of the lung airways were used to reconstruct the tracheal test geometry by 3D printing techniques. Flow spectrum, vortical structures, and the wall stresses are analyzed for the computed cases. Four turbulence models (k − ɛ, k − ω SST, k − ɛ R, and LES) are compared, and all indicate an increase in peak WSS and vortex intensity during coughing versus normal expiration. The present work confirms the importance of CFD simulations to model and quantify airflow throughout the respiratory cycle. The paper proposes a method to calculate wall shear stress, one of the most relevant parameters for characterizing airway function and the mechanical response of tracheal endothelial cells.
Mechanical ventilation is a critical intervention for intubated patients suffering from respiratory complications, such as excess mucus accumulation in the trachea, which can obstruct airflow. In this study, we investigate the impact of a Fresubin-water emulsion (1g/50ml), simulating mucus, on airflow resistance in a square-profile tube representing a simplified tracheal segment. The hypothesis predicate that the emulsion will increase airflow resistance under mechanical ventilation, mimicking the obstructive effects of mucus in patients. A computational fluid dynamics (CFD) analysis was employed to evaluate the airflow characteristics within the tube, focusing on velocity profiles and pressure drop. The results confirmed that the viscoelastic properties of the emulsion significantly altered airflow behavior, producing non-uniform velocity distributions and an elevated pressure gradient along the tube. These findings suggest that the emulsion effectively replicates the behavior of mucus in the trachea, offering valuable insights for improving mechanical ventilation strategies in patients with respiratory obstructions.