Doru Daniel Cristea

Dr. Doru Daniel Cristea

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2025 in Gels
Verified
Journal Article
Open access
PDF file
Andreea TrifanAndreea Trifan
Andreea Trifan
ELEduard Liciu
Eduard Liciu
ANAndrei Nedelcu
Andrei Nedelcu
MDMihai Dragomir
Mihai Dragomir
DCDoru Daniel Cristea
Doru Daniel Cristea
CBCristina BUSUIOC
Cristina BUSUIOC
Bone defects remain a significant clinical challenge, creating a severe need for advanced biomaterials for tissue regeneration. This study addresses this issue by developing 3D-printed composite hydrogels containing alginate, gelatine, and resorbable calcium phosphates (monetite and brushite) for bone tissue engineering. The scaffolds were fabricated using extrusion-based 3D printing and evaluated for their morphology, porosity, mechanical strength, swelling, degradation, and in vitro mineralization, while their cytocompatibility was assessed using LIVE/DEAD cell viability assays. The key findings demonstrate that calcium phosphate incorporation enhanced the mechanical stability by 15–25% compared to the controls, and mineral deposition increased significantly in the composite scaffolds. The developed hydrogels are bioactive and represent promising, customizable scaffolds for bone regeneration. These results support their further investigation as viable alternatives to traditional bone grafts for clinical bone tissue engineering applications.

1 August 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
ATAndreea Trifan
Andreea Trifan
ELEduard Liciu
Eduard Liciu
ANAndrei Nedelcu
Andrei Nedelcu
MDMihai Dragomir
Mihai Dragomir
DCDoru Daniel Cristea
Doru Daniel Cristea
CBCristina BUSUIOC
Cristina BUSUIOC
Bone defects remain a significant clinical challenge, creating a severe need for advanced biomaterials for tissue regeneration. This study addresses this need by developing and characterizing 3D-printed composite hydrogels composed of alginate, gelatin, and resorbable calcium phosphates (monetite and brushite) for bone tissue engineering. A series of scaffolds was fabricated using extrusion-based 3D printing and systematically evaluated for morphology, porosity, mechanical strength, swelling, degradation, and in vitro mineralization. The inclusion of calcium phosphates enhanced the mechanical stability and promoted mineral deposition within the hydrogel matrix, while cytocompatibility was assessed using LIVE/DEAD cell viability assays. These findings indicate that the developed 3D-printed hydrogels are bioactive, constituting promising, customizable scaffolds suitable for bone regeneration, offering a viable alternative to traditional bone grafts. The results support further investigation of these materials for clinical applications in bone tissue engineering.

20 May 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
ATAndreea Trifan
Andreea Trifan
ELEduard Liciu
Eduard Liciu
CBCristina Busuioc
Cristina Busuioc
ISIzabela-Cristina Stancu
Izabela-Cristina Stancu
ABAdela Banciu
Adela Banciu
APAlexandru Paraschiv
Alexandru Paraschiv
The proposal of this research activity is to produce composite hydrogel-bioactive glass. The primary purpose of this research is to develop and optimize 3D printed scaffolds using doped bioglass, aimed at enhancing bone regeneration in bone defects. The bioglass, a bioactive material known for its bone-bonding ability (SiO2–P2O5–CaO–Na2O), co-doped with europium and silver will be synthesized and doped to improve its biological properties. This doped bioglass will then be combined with a biocompatible hydrogel, chosen for its adequate cellular response and printability. The composite material will be printed to form a scaffold, providing a structure that not only supports the damaged bone, but also encourages osteogenesis. A variety of methods were employed to assess the rheological, compositional, structural, and morphological characteristics of the samples: Fourier Transformed Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) coupled with Energy-dispersive X-ray Spectroscopy (EDS). Additionally, simulated body fluid (SBF) immersion for bioactivity monitoring, and immunocytochemistry for cell viability were used to evaluate the biological response of the scaffolds.

1 July 2024 in Romanian Journal of Rhinology
Verified
Journal Article
Open access
PDF file
MDMihai Dragomir
Mihai Dragomir
CSCodrut Sarafoleanu
Codrut Sarafoleanu
ELEduard Liciu
Eduard Liciu
DCDoru Daniel Cristea
Doru Daniel Cristea
Digital planning and 3D printing have seen a significant impact in personalised presurgical planning in ENT pathology. However, segmentation and 3D printing of the cranium and especially the sinuses in ENT sinonasal pathologies are still fraught with challenges. This article will provide a comprehensive analysis, from segmentation to 3D printing, to provide insights into the future directions of 3D printing in sinonasal pathology and its implications for patient care.

11 December 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NTNicoleta Octavia Tanase
Nicoleta Octavia Tanase
CMCiprian-Stefan Mateescu
Ciprian-Stefan Mateescu
DCDoru Daniel Cristea
Doru Daniel Cristea
CBCorneliu Balan
Corneliu Balan
The paper is concerned with experimental investigations and numerical simulations of airflow in a rigid model of human tracheal bifurcation during a respiratory cycle in the presence of cough. The main goal of the study is to calculate the velocity and tracheal wall shear stress (WSS) distributions under the time variation in the pressure difference. A sequence of inspiration-expiration of measured flow rates and pressure is used to calibrate the 3D unsteady numerical solutions for different imposed boundary conditions at the edges of the bifurcation. The experimental data are obtained using commercial medical devices: (i) a spirometer and (ii) a mechanical ventilator, respectively. CT images of the lung airways were used to reconstruct the tracheal test geometry by 3D printing techniques. Flow spectrum, vortical structures, and the wall stresses are analyzed for the computed cases. Four turbulence models (k − ɛ, k − ω SST, k − ɛ R, and LES) are compared, and all indicate an increase in peak WSS and vortex intensity during coughing versus normal expiration. The present work confirms the importance of CFD simulations to model and quantify airflow throughout the respiratory cycle. The paper proposes a method to calculate wall shear stress, one of the most relevant parameters for characterizing airway function and the mechanical response of tracheal endothelial cells.

29 September 2025 in Orthopaedic Proceedings
Verified
Journal Article
Closed access
DCDoru Daniel Cristea
Doru Daniel Cristea
3D printing is revolutionizing modern medicine, offering innovative solutions that enhance patient care, improve surgical outcomes, and transform medical education. This presentation delves into the diverse applications of 3D printing in healthcare, from the creation of precise anatomical models for pre-surgical planning and realistic training tools for medical education to the development of patient-specific surgical guides, implants, and prosthetics. By showcasing the potential of additive manufacturing to advance personalized medicine, this presentation highlights how it enables treatments tailored to individual patient needs. Through the integration of medical image segmentation and advanced manufacturing techniques, 3D printing is reshaping medical practice, paving the way for more customized, efficient, and safer healthcare delivery and surgical procedures.