In this study, poppy oil and canola oil were subjected to acid and base catalysed transesterification reactions and biodiesel fuels were obtained. In addition, tests of the additive-free state of standard diesel fuel and biodiesel were also performed for comparison. These fuels have been subjected to performance and emission tests in a direct injection three-cylinder diesel engine. These values are compared with the values of standard diesel fuel. According to the results obtained from engine tests, the biodiesel produced with poppy, canola oil, and nanoparticle additives generally showed similar properties with diesel fuel. In terms of volume, the increase in the biodiesel ratio in diesel fuel has been found to increase the specific fuel consumption and exhaust outlet temperature values. By using biodiesel-containing fuels, compared to diesel fuel, CO, HC, smoke emissions decreased, NOx, CO2, and O2 increased. Biodiesel fuel samples with additives were obtained by adding a new type of CuO nanoparticle produced in the study to biodiesel-containing fuels. Comparison of the biodiesel samples and the fuel created by adding nanoparticles to these samples with the addition of nanoparticles, it has made a great contribution in the desired direction in the consumption of approximately 20% CO, 27% HC, 29% smoke (soot), and 16% specific fuel consumption. As an innovation to the literature, improvement in combustion and performance characteristics of biodiesel with nanoparticle additive, decrease in emission values and positive effect of this decrease on the environment were observed as a result of the study.
5 December 2024 in Journal of Thermal Analysis and Calorimetry
The objective of this study is to investigate the effects of Mn2O3 nanoparticle additives on the performance and emission characteristics of biodiesel fuels produced from vegetable- and waste-based oils. Biodiesel fuels were synthesized via the transesterification process, after which Mn2O3 nanoparticles were blended in different concentrations (50, 75, and 100 ppm). The prepared fuels were tested in a single-cylinder diesel engine operating under constant speed and variable load conditions. Engine performance parameters such as specific fuel consumption (SFC) and thermal efficiency, along with emission indicators including CO, HC, NOx, smoke opacity, and exhaust gas temperature, were systematically analyzed. Additionally, the experimental findings were modeled and validated using the machine learning-based linear regression method. The addition of Mn2O3 nanoparticles significantly improved combustion and emission performance. Among all samples, the COB10+ 100 ppm Mn2O3 fuel exhibited the best overall performance, achieving a 37.50% reduction in CO, 38.8% reduction in HC, and 33.84% reduction in smoke (soot) emissions compared to conventional diesel. This fuel also demonstrated an increase in thermal efficiency comparable to that of diesel. The improvement in thermal efficiency was attributed to enhanced the in-cylinder temperature, reduced ignition delay, and shorter combustion duration. Furthermore, the use of waste-derived vegetable oils contributed to lower production costs and a reduction in environmental impact. The linear regression model yielded an optimum prediction accuracy with a mean squared error of 5.86 × 10−6 for CO emission data. These findings indicate that Mn2O3 nanoparticles can effectively enhance the performance and sustainability of biodiesel fuels while maintaining economic and ecological advantages.
Teknolojinin hızla geliştiği günümüz dünyasında makine mühendisliği, yalnızca klasik mekanik sistemlerin tasarımı ile sınırlı kalmayıp; dijital dönüşüm, akıllı üretim sistemleri ve sürdürülebilir enerji teknolojileri ile birlikte çok daha geniş bir perspektife ulaşmıştır. Endüstri 4.0, yapay zekâ destekli üretim, ileri malzeme teknolojileri ve yenilenebilir enerji sistemleri gibi gelişmeler, makine mühendisliğinin geleceğini yeniden şekillendirmektedir. Makine Mühendisliğinde Yeni Nesil Teknolojiler adlı bu eser; modern mühendislik yaklaşımlarını, güncel araştırmaları ve geleceğe yön veren teknolojik gelişmeleri bir araya getirerek okuyuculara kapsamlı bir bakış açısı sunmaktadır. Kitapta; ileri üretim teknolojileri, enerji sistemleri, akıllı malzemeler ve sürdürülebilir mühendislik çözümleri gibi alanlarda yapılan bilimsel çalışmalar ele alınmaktadır. Akademisyenler, araştırmacılar, lisans ve lisansüstü öğrencileri ile mühendislik alanında çalışan profesyoneller için önemli bir başvuru kaynağı niteliği taşıyan bu kitap, makine mühendisliğinin değişen ve gelişen yüzünü ortaya koymayı amaçlamaktadır. Disiplinler arası yaklaşımların önem kazandığı günümüzde, mühendislik alanındaki yenilikçi uygulamaların anlaşılmasına ve geliştirilmesine katkı sağlaması hedeflenmektedir. Bilimsel bilgi ile teknolojik yeniliklerin buluştuğu bu çalışma, makine mühendisliğinin geleceğine ışık tutan önemli bir kaynak olma niteliği taşımaktadır.
25 December 2020 in International Journal of Innovative Engineering Applications
Bu çalışmada kanola, soya ve atık ayçiçeği yağlarından baz katalizörlü transesterifikasyon reaksiyonu uygulanarak biyodizel üretilmiştir. Bu yağlardan üretilen biyodizeller TS-EN 14214 standarlarına uygun olduğu araştırılmıştır. Üretilen yakıtlar dizel yakıtla %5, %10 ve %20 oranlarında karıştırılarak üç silindirli direkt püskürtmeli bir dizel motorda test edilmiştir. Motor performans ve emisyon karekteristikleri dizel yakıt ile kıyaslanmıştır. Ayrıca biyodizel ve dizel yakıt kullanılması durumundaki elektrik üretim maliyetleri karşılaştırılmıştır. Deneysel sonuçlara göre; biyodizel karışımlarının dizel yakıt ile benzer özellikler gösterdiği tespit edilmiştir. Dizel yakıt içerisindeki biyodizel oranının artması ile özgül yakıt tüketiminde ve egzoz çıkış sıcaklığında artış gözlenmiştir. Motordaki biyodizel kullanımı dizel yakıt ile kıyaslandığında HC, CO, duman emisyonlarında düşüş, CO2, NOX ve O2 değerlerinde artış olduğu görülmüştür. Yapılan motor testleri sonucunda biyodizel ve karışım yakıtlarının dizel motorda yapısında değişiklik yapılmadan kullanılabilirliği sonucuna varılmıştır. Biyodizellerin yağlama özelliği olduğundan dolayı aşınmalar konusunda dizel yakıta kıyasla daha fayda sağladığı görülmüştür. Ayrıca hava kirliliğini azıltıcı etkisi olduğu için dizel motorlar için alternatif bir yakıt olacağı görülmüştür. Test yakıtları arasında en düşük üretim maliyetinin atık ayçiçeği yağı biyodizeli olduğu tespit edilmiştir. Dizel yakıt kullanımında 1 kW elektrik, 2.12 TL'ye üretilirken, %20 oranında atık ayçiçeği yağı biyodizeli (AAYB20) yakıtının kullanımında ise 1.99 TL bedel karşılığında üretilmiş olduğu tespit edilmiştir.
This work investigates the influence of hybrid NiO–SiO2 nanoparticles on the engine behavior of biodiesel derived from waste sunflower oil and evaluates the experimental outcomes using a data-driven modeling approach. Biodiesel was produced via transesterification and doped with nanoparticles at concentrations of 50, 75, and 100 ppm. Performance and emission tests were conducted on a single-cylinder diesel engine operating at constant speed under varying loads. Specific fuel consumption, brake thermal efficiency, CO, HC, NOx, smoke opacity, and exhaust gas temperature were recorded and analyzed. The incorporation of nanoparticles improved combustion quality and contributed to substantial reductions in harmful emissions. The WSOB20 blend containing 100 ppm NiO–SiO2 provided the most balanced results, decreasing CO, HC, and smoke emissions by 39.50%, 39.40%, and 35.20%, respectively, relative to diesel fuel, while preserving competitive thermal efficiency. A linear regression model developed for CO prediction produced a low mean squared error (1.08 × 10−5), indicating strong predictive capability. The findings confirm that hybrid nanoparticle additives can enhance biodiesel performance while supporting accurate emission forecasting.