Methods of Mössbauer spectroscopy, transmission electron microscopy, and X-ray diffraction have been used to study structural and phase transformations in surface layers of iron and Fe-Cr-(Ni) alloys...
Objectives. To synthesize phosphorus-containing oligoestermethacrylates spatially separated by spacers of aliphatic or aromatic structure and evaluate their effect on photocuring kinetics.Methods. For determining the qualitative and quantitative composition of the synthesized compounds, the following methods were used: thin layer chromatography; chromatographic and mass spectrometry; infrared spectroscopy; 1H, 13C, 31P nuclear magnetic resonance spectroscopy; differential scanning calorimetry. The dielectric loss tangent was determined on a specially designed optical cell with an ultraviolet (UV) light source to an immittance meter. Elemental analysis was performed on an energy dispersive X-ray fluorescence spectrometer.Results. Spatially separated oligoestermethacrylates based on phosphorus trichloride containing aliphatic or aromatic spacers in the structure were synthesized. During the interaction of glycidyl methacrylate with phosphorus trichloride in the mass of the latter, reaction products were shown to be formed both according to the Krasusky rule from the side of the α-carbon atom, as well as against this rule with the formation of isomeric products. Obtaining these compounds in bulk is possible only in the presence of a homopolymerization inhibitor. The influence of the spacer structure on the curing rate of oligoestermethacrylates under the action of UV radiation has been established. It has been shown that the introduction of a spacer into the oligomer structure is accompanied by an increase in the induction period by a factor of 39 compared to a sample without a spacer.Conclusions. The results obtained indicate the possibility of obtaining new oligoestermethacrylates with aliphatic and aromatic spacers in the structure. The influence of the structure of the spacer on the kinetics of photocuring is determined.
To reduce the flammability of polymers, functional flame retardants have become widespread, among which phosphorus-containing methacrylates occupy a special place. Despite the well-developed issues of their synthesis and use, the search for new monomers of this class remains a demanding task due to their efficiency, environmental friendliness, and a number of other reasons. This review systematizes the results of recent research concerning phosphorus-containing polymerizable monomers of the methacrylate series, the use of which makes it possible to reduce the flammability of the resulting materials and composites.
Objectives. The work sets out to investigate the influence of the structure of spacer in structure of phosphorus(III)-containing oligoester(meth)acrylates on physical and mechanical properties of polymers and their combustibility. Methods. The physical and mechanical properties of polymers were determined using the following: DMA 242 E Artemis dynamic mechanical analyzer ( NETZSCH , Germany); universal testing machine for standard tests on materials ( ZwickRoell Group , Germany); GT-7045-HMH(L) impact test machine ( Gotech Testing Machines, Inc ., Taiwan); Q-1500 D derivatograph of the Paulic–Paulic– Erdey system (thermogravimetry, IOM , Hungary); Oxygen Index Module device for determination of burning behavior by plastic flammability testing according to oxygen index ( Concept Equipment , United Kingdom); GT-7045-HMH(L) device for determination of the Vicat softening temperature ( Gotech Testing Machines, Inc ., Taiwan); SFT-110XW supercritical fluid extractor ( Supercritical Fluid Technologies, Inc ., USA) for supercritical fluid extraction with carbon dioxide. Results. The influence of the spacer structure in the structure of phosphorus(III)-containing oligoester(meth)acrylates on the dynamic mechanical and physicomechanical properties of polymers was established. Comparative assessment of the impact of the spacer structure on properties of polymers was carried out in terms of their heat stability (thermogravimetric analysis) and combustibility (measurement of limited oxygen index). It is established that polymers having balanced physical and mechanical properties can be obtained by introducing spacer characteristics into the oligomer structure. Polymers obtained on the basis of phosphorus(III)-containing oligoester(meth)acrylates with spacers demonstrate considerable resistance to impact strength tests. Conclusions. The achieved results testify to the possibility of obtaining polymers on the basis of phosphorus(III)-containing oligoester(meth)acrylates with spacer attributes that possess increased resistance to impact strength and thermal stability tests at an insignificant decrease in their combustibility.
Photopolymerization of compositions based on poly(vinyl butyral) solutions in a mixture of di-(1-methacryloxy-3-chloropropoxy-2-)methylphosphonate (FOM-II) and 2-hydroxypropylmethacrylate (HPMA) monomers is studied. The effectiveness of these compositions as photocurable adhesives for fireproof glass assemblies is evaluated. It is shown that the developed photopolymerizable adhesives can be recommended for fabrication of fireproof glass assemblies for building purposes due to their translucence, high adhesion to silicate glass (up to 30.5 MPa), and accordance with the EIW15 protection class according to the results of firing tests.