Objectives. To synthesize phosphorus-containing oligoestermethacrylates spatially separated by spacers of aliphatic or aromatic structure and evaluate their effect on photocuring kinetics.Methods. For determining the qualitative and quantitative composition of the synthesized compounds, the following methods were used: thin layer chromatography; chromatographic and mass spectrometry; infrared spectroscopy; 1H, 13C, 31P nuclear magnetic resonance spectroscopy; differential scanning calorimetry. The dielectric loss tangent was determined on a specially designed optical cell with an ultraviolet (UV) light source to an immittance meter. Elemental analysis was performed on an energy dispersive X-ray fluorescence spectrometer.Results. Spatially separated oligoestermethacrylates based on phosphorus trichloride containing aliphatic or aromatic spacers in the structure were synthesized. During the interaction of glycidyl methacrylate with phosphorus trichloride in the mass of the latter, reaction products were shown to be formed both according to the Krasusky rule from the side of the α-carbon atom, as well as against this rule with the formation of isomeric products. Obtaining these compounds in bulk is possible only in the presence of a homopolymerization inhibitor. The influence of the spacer structure on the curing rate of oligoestermethacrylates under the action of UV radiation has been established. It has been shown that the introduction of a spacer into the oligomer structure is accompanied by an increase in the induction period by a factor of 39 compared to a sample without a spacer.Conclusions. The results obtained indicate the possibility of obtaining new oligoestermethacrylates with aliphatic and aromatic spacers in the structure. The influence of the structure of the spacer on the kinetics of photocuring is determined.
1 January 2022 in Izvestia Volgograd State Technical University
Objectives. The study set out to investigate the effect of ureas and their sulfur- and selenium-containing analogs on the vulcanization of elastomeric materials based on nitrile butadiene rubber and their resistance to thermo-oxidative aging. Methods. The properties of the molecules of ureas under study were calculated by the MM+ quantum chemical method of molecular mechanics and PM3 semiempirical method using the HyperChem 8.0 software. Vulcanization of rubbers and total crosslink density were studied using the rotorless vulcanization method with a MonTech MDR 3000 Professional rheometer. The dynamic characteristics of vulcanized rubbers were investigated in accordance with ASTM D6601-02 and D5992-96 standards. The efficiency of the studied antioxidants against thermo-oxidative aging was evaluated in accordance with GOST 9.024-74. Infrared (IR) spectra of samples were recorded with an FT-801 Fourier-transform IR spectrometer (Russia) according to the attenuated total reflection method. Results. For the first time, a study was conducted on the efficiency of 1-(3-chlorophenyl)-3-phenylurea, 1-(3-chlorophenyl)-3-phenylthiourea, and 1-(3-fluorophenyl)-3-phenylselenourea as antioxidants for elastomers under conditions of thermo-oxidative aging. The effect of these substances on the vulcanization characteristics and total crosslink density of materials based on nitrile butadiene rubber was investigated. Conclusions. The values of electron affinity energy and its sign were shown to accurately predict the possibility of using individual molecules as accelerators of the vulcanization process or antioxidants. With a change in the electron affinity energy from 0.051 (urea) to −1.115 (thiourea) and −1.365 eV (selenourea), the time to the start of vulcanization was shown to change from 15 to 3 and 2 min, respectively. As a result of thermo-oxidative aging of rubbers based on BNKS-28 AN rubber without a stabilizer and with 1-(3-chlorophenyl)-3-phenylurea, 1-(3-chlorophenyl)-3-phenylthiourea, and 1-(3-fluorophenyl)-3-phenylselenourea, the total crosslink density changes by 33 %, 23 %, 25 %, and 29 %, respectively. In this connection, the use of 1-(3-chlorophenyl)-3-phenylurea somewhat improves the stability of rubbers to thermo-oxidative aging, whereas 1-(3-chlorophenyl)-3-phenylthiourea and 1-(3-fluorophenyl)-3-phenylselenourea do not worsen this property when introduced into the rubber compound.
1 January 2022 in Izvestia Volgograd State Technical University