Investigation into geological storage of CO2 is underway at Hontomín (Spain). The storage reservoir is a deep saline aquifer formed by naturally fractured carbonates with low matrix permeability. Understanding the processes that are involved in CO2 migration within these formations is key to ensure safe operation and reliable plume prediction. A geological model encompassing the whole storage complex was established based upon newly-drilled and legacy wells. The matrix characteristics were mainly obtained from the newly drilled wells with a complete suite of log acquisitions, laboratory works and hydraulic tests. The model major improvement is the integration of the natural fractures. Following a methodology that was developed for naturally fractured hydrocarbon reservoirs, the advanced characterization workflow identified the main sets of fractures and their main characteristics, such as apertures, orientations, and dips. Two main sets of fracture are identified based upon their mean orientation: North-South and East-West with different fracture density for each the facies. The flow capacity of the fracture sets are calibrated on interpreted injection tests by matching their permeability and aperture at the Discrete Fracture Network scale and are subsequently upscaled to the geological model scale. A key new feature of the model is estimated permeability anisotropy induced by the fracture sets.
1 November 2016 in International Journal of Greenhouse Gas Control
After the Paris Agreement in which 195 countries are involved, the Carbon Capture and Storage (CCS) is now an accepted technology in the United Nations Framework Convention on Climate Change (UNFCCC). In Spain, Fundación Ciudad de la Energía (CIUDEN) has successfully completed the full CCS chain, being CO2 captured in the Technology Development Centre in Cubillos del Sil (León, Spain) whereas that it is geologically stored in a deep saline aquifer, formed by fractured carbonates with poor matrix porosity, located in the Technology Development Plant (TDP) at Hontomín (Burgos, Spain). The results of the field tests, in which up to 150 tons of CO2 and synthetic air (5 %v of N2 and O2) were co-injected on site, are analyzed in this paper comparing the operational parameters gained during the injection of impure CO2 (pressures, temperatures and flow ranges) with its corresponding baseline previously determined (i.e. 1,500 tons of pure CO2 were injected during the reservoir hydraulic characterization). Besides that, the geochemical reactivity analysis of impure CO2 injected in this saline aquifer and its correlation with the results from laboratory tests were assessed. As main conclusions from laboratory scale results, a porosity diminution was measured after the injection of CO2 with 5 %v of SO2; apart from that, without SO2, the effluent pH was in the range of 7-8 whereas in case of CO2 and SO2, a pH of 1-2 was obtained. Otherwise and focused on field scale tests, a density decrease was detected comparing the base case (pure CO2) with the CO2 injection containing 5.1 %v of synthetic air. On the other hand, Ca2+, SO42-, Mg2+ and K+ migration effects in the rock were also detected and analyzed
Carbon sequestration in deep saline aquifers was recently developed at the industrial scale. CO2 injection experiences in carbonates are quite limited, most of them coming from projects carried out in porous mediums in the USA and Canada. Hontomín (Spain) is the actual on-shore injection pilot in Europe, being a naturally fractured carbonate reservoir where innovative CO2 injection strategies are being performed within the ENOS Project. CO2 migration through the fracture network existing on site produces hydrodynamic, mechanical and geochemical effectsdifferent from those caused by the injection in mediums with a high matrix permeability. The interpretation of these effects is required to design safe and efficient injection strategies in these formations. For this, it is necessary to determine the evolution of pressure, temperature and flow rate during the injection, as well as the period of pressure recovery during the fall-off phase. The first results from the not-continuous injections (8–24 h) conducted at Hontomín reveal the injection of liquid CO2 (density value of 0.828 t/m3) and the fluid transmissivity through the fractures. Taking into account the evolution of the pressure and flow rate showed variations of up to 23% and 30% respectively, which means that the relevant changes of injectivity took place. The results were modeled with a compositional dual media model which accounts for both temperature effects and multiphase flow hysteresis because alternative brine and CO2 injections were conducted. Advanced modeling shows the lateral extension of CO2 and the temperature disturbance away from the well.
1 December 2019 in International Journal of Greenhouse Gas Control