The generation of turbulent inflow conditions is a key issue in large eddy simulation (LES) or direct numerical simulation (DNS). In this paper, an improved synthetic eddy method (SEM) is proposed to generate inflow turbulence for LES and DNS. The improvements about SEM focus on the eddy radius and eddy distributions. First, the eddy radius is improved to reduce the nonphysical vortex structure on the wall caused by overestimation of the radius. Second, a sampling method using Gaussian distribution is proposed to improve the distribution of eddies, which accurately captures the randomness of turbulent structure size and is close to the actual flow field. The improved method is applied to the direct numerical simulation of the supersonic turbulent boundary layer at Mach 2.7 and the 24° compression ramp. Results indicate that the predictions yielded by the improved method are in good agreement with both DNS and experimental data. Compared to the original method, the improved method exhibits a more rapid recovery of the friction coefficient and effectively shortens the development distances. The improved SEM has enhanced the efficiency and accuracy of generating inlet turbulence, which can provide inlet turbulence boundary conditions for LES and DNS.
Though the k–ω shear-stress transport (SST) turbulence model is widely used, it is developed based on incompressible flow and the analysis of simple flow characteristics such as boundary layer and free shear flows. Due to the lack of comprehensive consideration of important flow structures, such as shock wave and highly compressible zones, the k–ω SST turbulence model has inherent limitations in describing supersonic flows. A multi-physics improvement strategy is proposed to improve the prediction accuracy of the k–ω SST model for supersonic flows. This strategy leverages shock/turbulent boundary layer and shock/compressibility functions to accurately recognize areas with significant structures, enabling targeted improvement of the turbulence model. Five supersonic flow cases are tested and analyzed, and the results show that while the single-physics turbulence model can improve the prediction accuracy of flows with a single flow structure corresponding to the correction, its prediction ability is insufficient in other flows with different flow structures. In contrast, the multi-physics turbulence model exhibits good ability in flows with multiple flow structures, while also maintaining the performance of the single-physics turbulence model. The multi-physics turbulence model has higher accuracy and stronger universality, making it advantageous for modeling complex supersonic flows.