This paper develops a new hybrid finite difference scheme which consists of a nonlinear WENOCU4 scheme to maintain the numerical stability near discontinuities and a fourth-order linear central scheme elsewhere to accurately resolve smooth fluctuations and to speed up the computation. The central scheme is constructed in a robust skew-symmetric form which satisfies energy conservation property. A new efficient discontinuity detector is employed to identify the smoothness of the flowfield. As for the one-dimensional scalar equations, the hybrid scheme behaves almost no attenuation associated with propagation error. The quantitative analysis of the shock-capturing error is investigated. The hybrid scheme also exhibits high-resolution spectral property in the wavenumber space. Extensive cases of Euler equations further demonstrate the high-resolution shock-capturing ability of the detector, remarkable vortices-resolving capacity, and superior computational efficiency of the hybrid scheme. The reduced computational cost of the hybrid scheme is about 30−50% with respect to the baseline scheme.
The cavity-assisted scramjet has been proven to be the most promising propulsion system for air-breathing hypersonic vehicles. In this paper, numerical simulations of a Mach 8 axisymmetric scramjet combustor are conducted and validated to investigate the effect of the cavity. The results indicate that the combustion state undergoes significant changes as the combustion heat release increases. Detailed analysis reveals that the role of the cavity in flame stabilization and combustion enhancement also changes with combustion heat release. Under weak heat release conditions, the high-speed environment results in reduced combustion efficiency, and the primary role of the cavity is to stabilize the flame. Increasing the cavity size does not yield significant gains but could bring redundant mass. As heat release intensifies, the combustion enhancement effect of the cavity becomes more prominent. The presence of the cavity dramatically improves fuel combustion efficiency. The distribution of supersonic and subsonic combustion modes, as well as that of premixed and diffusion combustion modes, is also affected by cavity size and combustion heat release. In the engineering development of scramjets, it is suggested that the design of the cavity flameholder should involve careful consideration of combustion heat release.
The generation of turbulent inflow conditions is a key issue in large eddy simulation (LES) or direct numerical simulation (DNS). In this paper, an improved synthetic eddy method (SEM) is proposed to generate inflow turbulence for LES and DNS. The improvements about SEM focus on the eddy radius and eddy distributions. First, the eddy radius is improved to reduce the nonphysical vortex structure on the wall caused by overestimation of the radius. Second, a sampling method using Gaussian distribution is proposed to improve the distribution of eddies, which accurately captures the randomness of turbulent structure size and is close to the actual flow field. The improved method is applied to the direct numerical simulation of the supersonic turbulent boundary layer at Mach 2.7 and the 24° compression ramp. Results indicate that the predictions yielded by the improved method are in good agreement with both DNS and experimental data. Compared to the original method, the improved method exhibits a more rapid recovery of the friction coefficient and effectively shortens the development distances. The improved SEM has enhanced the efficiency and accuracy of generating inlet turbulence, which can provide inlet turbulence boundary conditions for LES and DNS.
An improved synthetic eddy method (SEM) is proposed in this paper for generating the boundary layer at the inlet of a computational domain via direct numerical simulation. The improved SEM modified the definition of the radius and the velocities of the eddies according to the distance of the eddies from the wall in the synthetic region. The regeneration location of the eddies is also redefined. The simulation results show that the improved SEM generates turbulent fluctuations that closely match the DNS results of the experiments. The skin friction coefficient of the improved SEM recovers much faster and has lower dimensionless velocity at the outer of the boundary layer than that of the traditional SEM.
Though the k–ω shear-stress transport (SST) turbulence model is widely used, it is developed based on incompressible flow and the analysis of simple flow characteristics such as boundary layer and free shear flows. Due to the lack of comprehensive consideration of important flow structures, such as shock wave and highly compressible zones, the k–ω SST turbulence model has inherent limitations in describing supersonic flows. A multi-physics improvement strategy is proposed to improve the prediction accuracy of the k–ω SST model for supersonic flows. This strategy leverages shock/turbulent boundary layer and shock/compressibility functions to accurately recognize areas with significant structures, enabling targeted improvement of the turbulence model. Five supersonic flow cases are tested and analyzed, and the results show that while the single-physics turbulence model can improve the prediction accuracy of flows with a single flow structure corresponding to the correction, its prediction ability is insufficient in other flows with different flow structures. In contrast, the multi-physics turbulence model exhibits good ability in flows with multiple flow structures, while also maintaining the performance of the single-physics turbulence model. The multi-physics turbulence model has higher accuracy and stronger universality, making it advantageous for modeling complex supersonic flows.
The weighted essentially non-oscillatory (WENO) scheme is a high-resolution, non-oscillatory shock-capturing method. It is renowned for its exceptional performance in handling discontinuous solutions in compressible flow simulations. However, as accuracy requirements and problem complexity continue to increase, the WENO scheme has revealed certain limitations, prompting extensive improvement studies by researchers. This paper reviews the improvements of the WENO scheme for numerical simulation of compressible flows, focusing on two aspects: nonlinear weights calculation and spatial reconstruction methods. It highlights the underlying concepts and implementation processes of various improved schemes. Their evolution trends, practical applicability, and limitations are discussed. Finally, suggestions for future work are given.