1 May 2024 in Physics of Fluids
Though the k–ω shear-stress transport (SST) turbulence model is widely used, it is developed based on incompressible flow and the analysis of simple flow characteristics such as boundary layer and free shear flows. Due to the lack of comprehensive consideration of important flow structures, such as shock wave and highly compressible zones, the k–ω SST turbulence model has inherent limitations in describing supersonic flows. A multi-physics improvement strategy is proposed to improve the prediction accuracy of the k–ω SST model for supersonic flows. This strategy leverages shock/turbulent boundary layer and shock/compressibility functions to accurately recognize areas with significant structures, enabling targeted improvement of the turbulence model. Five supersonic flow cases are tested and analyzed, and the results show that while the single-physics turbulence model can improve the prediction accuracy of flows with a single flow structure corresponding to the correction, its prediction ability is insufficient in other flows with different flow structures. In contrast, the multi-physics turbulence model exhibits good ability in flows with multiple flow structures, while also maintaining the performance of the single-physics turbulence model. The multi-physics turbulence model has higher accuracy and stronger universality, making it advantageous for modeling complex supersonic flows.
13 January 2026 in Combustion and Flame
15 April 2026 in Aerospace Science and Technology
12 September 2026 in Proceedings of the Combustion Institute
24 April 2026 in SSRN Electronic Journal
The application of detonation combustion to enhance the combustion performance of ramjets requires careful consideration of combustion stability. Recirculation zones are critical for flame stabilization and detonation enhancement, yet their governing role in detonation-dominated combustion regimes remain poorly understood. This work numerically examines the cavity-induced recirculation effects on rotating detonation wave (RDW) behavior in a flow-through ramjet rotating detonation combustor by varying the cavity front-step expansion angle θ over five configurations: 90°, 58°, 38°, 21°, and 11°. A weak abrupt expansion (11°) fails to establish a recirculation zone and results in deflagration regime. Moderate expansion generates stable recirculation and sustains detonation regime, whereas a further increase toward 90° causes RDW intensity to first increase and then decrease. The optimal detonation performance occurs at θ = 58°, corresponding to the highest radial pressure peaks and the maximum combustion efficiency. Recirculation zones deliver thermal preconditioning and reactive radicals at the contact region of the unburned mixture and product to facilitate rapid detonation heat release, yet excessive recirculation promotes parasitic combustion that competes with the detonation front. Appropriately reducing θ within the detonation-sustaining region weakens parasitic combustion at the interface and improves the regularity and stability of RDW propagation. The RDW-induced counterflow provides analogous recirculation benefits by prolonging reactant residence time and enhancing mixing, underscoring the importance of a properly scaled recirculation zone. This study elucidates the mechanism by which the cavity front-step angle regulates recirculation to control RDW propagation and stabilization, and establishes a novel design paradigm for ramjet rotating detonation engines that prioritizes optimal RDW propagation over large flame-holding recirculation, supporting the design and active control of high-performance rotating detonation engines.