Zhenghao Liu

Dr. Zhenghao Liu

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 December 2025 in Magnetism
Verified
Journal Article
Open access
PDF file
SASayem Ul Alam
Sayem Ul Alam
Shuhui LiShuhui Li
Shuhui Li
YHYang-Ki Hong
Yang-Ki Hong
ZLZhenghao Liu
Zhenghao Liu
MWMd Abdul Wahed
Md Abdul Wahed
HCHaein Choi-Yim
Haein Choi-Yim
Permanent magnet synchronous machines (PMSMs) are the preferred choice for electric vehicles (EVs), hybrid EVs, and wind turbines because of their high torque density, efficiency, and wide constant-power speed range. Conventional PMSMs rely heavily on rare-earth (RE) permanent magnets like Nd-Fe-B, which offers high remanence and coercivity but comes with high costs, supply chain issues, and environmental concerns. To address these challenges, this paper explores the potential of tetragonal Fe2Ni2N, a newly developed RE-free permanent magnet, as a replacement for commercial Nd-Fe-B (N35) in high-performance PMSMs. Fe2Ni2N shows a remanent flux density of 1.2 T and coercivity of 0.957 MA/m, closely matching those of commercial N35 magnets. Finite element analysis (FEA) in Ansys Maxwell was performed on both surface-mounted (SPM) and interior-mounted (IPM) PMSMs under EV-representative operating conditions. Results demonstrate that Fe2Ni2N-based machines have similar demagnetization resistance, torque, and efficiency to those with N35 magnets, with slight performance advantages at low speeds and nearly identical performance at high speeds. Furthermore, system-level parameters such as DC bus voltage and stator current were analyzed, showing that increased voltage extends the constant torque region while higher current enhances torque output but can slightly reduce efficiency at elevated speeds. These findings confirm that Fe2Ni2N is a promising RE-free alternative to Nd-Fe-B for sustainable, high-performance PMSMs. Results show that Fe2Ni2N-based machines have similar demagnetization resistance, torque, and efficiency to those with N35 magnets, with slight performance benefits at low speeds and nearly identical results at high speeds. Furthermore, system-level parameters, such as DC bus voltage and stator current, were analyzed. The results show that increased voltage extends the constant-torque region, while higher current enhances torque output but can slightly reduce efficiency at elevated speeds. These findings confirm that Fe2Ni2N is a promising RE-free alternative to Nd-Fe-B for sustainable, high-performance PMSMs.

7 October 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SASayem Ul Alam
Sayem Ul Alam
Shuhui LiShuhui Li
Shuhui Li
YHYang-Ki Hong
Yang-Ki Hong
ZLZhenghao Liu
Zhenghao Liu
MKMd Imtiaz Kamrul
Md Imtiaz Kamrul
MWMd Abdul Wahed
Md Abdul Wahed
Rising costs, supply uncertainty, and geopolitical dependence associated with rare-earth permanent magnets have created an urgent need to reduce permanent magnet (PM) usage in electric machine designs while maintaining high electromagnetic performance. This paper presents a comprehensive comparative investigation of PM reduction strategies for three widely adopted traction machine topologies: Surface Permanent Magnet (SPM), Interior Permanent Magnet (IPM), and Permanent Magnet-Assisted Synchronous Reluctance (PMASynRM) machines. We developed a unified evaluation framework by integrating each machine’s electromagnetic characteristics, electrical operating constraints, and practical inverter limitations across a wide operating speed range. Finite element analysis (FEA) is employed to systematically investigate the effects of progressive PM volume reduction by independently varying magnet width and length while keeping stator geometry, winding configuration, material properties, and operating conditions. We reduced PM dimensions from 100% to 30% of the baseline design to evaluate their impact on torque-speed characteristics, efficiency, and flux-weakening capability. The results reveal that the impact of PM reduction depends strongly on both machine topology and the magnet reduction strategy. Across all machine topologies, reducing magnet width consistently preserves higher torque capability, efficiency, and high-speed operating performance compared with reducing magnet length. Among the machines investigated, the SPM topology exhibits the greatest sensitivity to PM reduction, particularly in the constant-torque region, owing to its complete reliance on permanent magnet excitation. In contrast, the IPM and PMASynRM machines show much greater tolerance to reduced PM volume because the additional contribution of reluctance torque from rotor saliency improves torque retention, extends the constant-power speed range, and reduces efficiency degradation. These findings provide valuable design insights into the trade-offs between permanent magnet utilization and machine performance, offering practical guidelines for minimizing rare-earth material consumption while maintaining competitive traction performance in next-generation electric vehicles and other sustainable electrification applications.

10 September 2026 in Electronics
Verified
Journal Article
Open access
PDF file
Md Rumman RafiMd Rumman Rafi
Md Rumman Rafi
Shuhui LiShuhui Li
Shuhui Li
MNMd Nurunnabi
Md Nurunnabi
YHYang-Ki Hong
Yang-Ki Hong
ZLZhenghao Liu
Zhenghao Liu
The application of DC power electronics has expanded significantly across modern transmission and distribution systems, spanning medium-voltage direct current (MVDC) and high-voltage direct current (HVDC) networks, as well as low-power DC supplies for nanoscale applications, in which experimental validation remains indispensable for verifying system performance and control strategies. However, developing experimental platforms for high-power, high-voltage, or nanoscale DC systems is technically challenging and expensive and has not been adequately addressed in the existing literature. To overcome these limitations, this paper presents a per-unit-based experimental twin (Ex-Twin) framework for Buck converters implemented with a nested-loop control architecture. By transforming the converter dynamics from the time domain to an angular-domain representation, the proposed per-unit framework enables the development of dynamically equivalent experimental twins across a wide range of operating scales. The feasibility and effectiveness of the proposed Ex-Twin framework are validated through comprehensive electromagnetic (EMT) simulation studies and hardware experimental results, demonstrating its potential as a scalable and cost-effective platform for the development, testing, and validation of advanced DC power electronic systems. EMT simulations verify the cross-scale dynamic equivalence of the converter models over power ratings from 2 kW to 2 MW and voltage levels from 54 V to 54 kV, provided that the corresponding per-unit parameters and normalized disturbances are preserved. Under the investigated operating conditions, the systems achieved efficiencies of 95.3%, 96.7%, and 94.3% at 2 kW, 20 kW, and 2 MW, respectively, using both the real-scale and corresponding per-unit controllers. These results demonstrate consistent performance across the evaluated power scales. In addition, laboratory tests conducted on a 1 kW, 50 V Buck-converter platform validate the real-time implementation of both the real-scale and per-unit controllers under reference-voltage and load disturbances. An experimentally measured efficiency of 92.1% was achieved with both controllers, further demonstrating their consistent performance.