Chenlong Qian

Mr. Chenlong Qian

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2024 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
ZNZhijun Niu
Zhijun Niu
XWXufeng Wang
Xufeng Wang
Lei ZhangLei Zhang
Lei Zhang
JWJiyao Wang
Jiyao Wang
ZCZechao Chang
Zechao Chang
XCxuyang chen
xuyang chen
In order to investigate the effects of elliptical defects on rock failure under ultrasonic vibrations, ultrasonic vibration tests and PFC2D numerical simulations were conducted on rocks with single elliptical defects. The research results indicated that the fracture fractal dimension, axial strain, and crack depth of specimens with elliptical defects at 45° and 90° were the smallest and largest, respectively. The corresponding strain and fractal dimension showed a positive linear and logarithmic function relationship with time. The maximum crack depth of 46.50 mm was observed on the specimens with an elliptical defect angle of 90°. Specimens with elliptical defects at 0°, 30°, 75°, and 90° exhibited more dense and frequent acoustic emission events than those with elliptical defects at 15°, 45°, and 60°. During the ultrasonic vibration process, the maximum total energy (87.86 kJ) and energy consumption coefficient (0.963) were observed on specimens with elliptical defect angles of 30° and 45°, respectively. The difference in the stress field led to varying degrees of plastic strain energy in the specimens, resulting in different forms of crack propagation and triggering differential acoustic emission events, ultimately leading to specimen failure with different crack shapes and depths. The fractal dimensions of elliptical defect specimens under ultrasonic vibration have a high degree of consistency with the changes in axial strain and failure depth, and the fractal dimension of defect specimens is positively correlated with the degree of failure of defect specimens.

14 January 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
XCxuyang chen
xuyang chen
XWXufeng Wang
Xufeng Wang
CQChenlong Qian
Chenlong Qian
DQDongdong Qin
Dongdong Qin
ZCZechao Chang
Zechao Chang
ZNZhijun Niu
Zhijun Niu
As a key sustainable green-mining technology, ultra-high-water backfill mining is widely used to control surface subsidence and sustain extraction of constrained coal seams. Focusing on the Hengjian coal mine in the Handan mining area, this study uses physical modeling and industrial tests to clarify surface subsidence under different filling rates and identify the rock layers that hydraulic supports must control at various equivalent mining heights. A method is proposed to improve the filling rate by optimizing the thickness of the hydraulic support canopy through topological analysis. Results show that, compared with a filling rate of 85%, a 90% filling rate reduces subsidence of the basic roof, key layer, and surface by 51%, 57%, and 63%, respectively, while the industrial practice results have verified that the filling rate can significantly control surface subsidence. The equivalent mining height thresholds for instability of the immediate roof and high basic roof at the 2515 working face are 0.44 m and 1.26 m. Reducing the trailing beam thickness by 10 cm can theoretically raise the filling rate of the 2515 working face by about 2%, offering guidance for similar mines.

22 January 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HLHui Liu
Hui Liu
LCLichuang Chen
Lichuang Chen
XWXufeng Wang
Xufeng Wang
HGHui Gao
Hui Gao
CQChenlong Qian
Chenlong Qian
XCxuyang chen
xuyang chen
This study aims to address the pronounced stress concentration in roadway-surrounding rock under conditions of multiple thick and hard roof strata at Xiao jihan coal mine, China. The work was carried out on the 13216 working mining face as the engineering background. A systematic investigation was conducted using a combination of theoretical analysis, numerical simulation, and field experiments. Under double mining disturbance, the lower thick hard roof behaves as a cantilever beam and the upper hard roof strata form a masonry beam structure, producing strong stress transfer to the roadway. The mechanical model indicates a peak stress of 28.90 MPa, 18.34 MPa higher than the in situ stress. Hydraulic roof cutting was designed at the upper thick hard roof horizon. UDEC simulations show that the vertical stress decreases from 26.10 MPa to 13.20 MPa. Field monitoring confirms pressure relief: the non-cutting zone shows a peak of 30.75 MPa, while the roof-cutting zone drops to 22.51 MPa, a 24.62% reduction. The findings of this study provide practical guidance for lateral structure regulation under similar geological and mining conditions.

27 January 2026 in Processes
Verified
Journal Article
Open access
PDF file
LWLu Wang
Lu Wang
JLJinming Li
Jinming Li
SGShenxiang Gao
Shenxiang Gao
XWXufeng Wang
Xufeng Wang
CQChenlong Qian
Chenlong Qian
ZWZehui Wu
Zehui Wu
Severe surface deformation induced by super-large mining height longwall extraction poses a significant threat to the safe operation of high-voltage transmission towers. In this study, a 330 kV straight-line transmission tower located above the 122104 working face of the Caojiatan Coal Mine was selected as a case study to investigate tower stability under mining-induced surface deformation and to develop corresponding protection technologies. An integrated monitoring system combining instantaneous and long-term measurements was established to characterize surface movement throughout the mining process. The results indicate that the maximum surface subsidence reached 7300 mm, while the maximum inclination and curvature attained 50 mm/m and 0.62 mm/m2, respectively, reflecting intense deformation of the overlying ground. Numerical simulations based on ANSYS 2021R1 were conducted to systematically evaluate the effects of surface inclination, compressive deformation, and tensile deformation on the structural response of the transmission tower. The critical deformation thresholds leading to structural failure were identified as 30 mm/m for inclination, −7.2 mm/m for horizontal compression, and 7.7 mm/m for horizontal tension. Based on these findings, a comprehensive protection system was proposed, integrating tower body reinforcement, combined foundation reconstruction, surface subsidence monitoring, dynamic jacking-based rectification, and foundation grouting reinforcement. The proposed scheme was successfully implemented in field practice. Monitoring results demonstrate that, after reinforcement and rectification, differential settlement of the tower foundation was controlled within 20 mm, and tower inclination remained below 1‰. This ensured uninterrupted underground mining operations and continuous power transmission within the Caojiatan Coal Mine corridor. The outcomes of this study provide a practical reference for the protection of high-voltage transmission towers under similar mining conditions.

1 January 2026 in Geofluids
Verified
Journal Article
Open access
HGHui Gao
Hui Gao
XDXiaopeng Duan
Xiaopeng Duan
XWXufeng Wang
Xufeng Wang
YXYuanman Xie
Yuanman Xie
ELEnqiang Liu
Enqiang Liu
CQChenlong Qian
Chenlong Qian
To theoretically explain and quantify the effect of advancing speed (ADS) on ground pressure (GP) behavior, the 13,218 working face of the Xiaojihan Coal Mine (XCM) was taken as the engineering case. Field measurements and theoretical analysis were combined to examine how changes in ADS influence the roof structure and the support resistance. Considering the motion characteristics of key blocks, a calculation model for support resistance under multilayer thick hard roofs was established, incorporating the ADS factor. The results show that the overlying roof behaves as a composite system composed of a short cantilever beam and a voussoir beam structure, where the periodic fracture of the voussoir beam is the dominant cause of periodic weighting. When the ADS is accelerated from 5 to 15 m/day, the periodic weighting interval (PWI) grows by 29.1%, while the subsidence, rotation angle, and subsidence duration of key block C decrease by 39.1%, 53.5%, and 57.0%, respectively. The horizontal thrust between blocks increases by 31.6%, and the support resistance decreases by 7.9%. Comparison with field data (11,467–13,852 kN) shows the model predictions (11,549–13,757 kN) agree within 5%, verifying its reliability and applicability. The findings provide theoretical guidance for the optimization of advancing parameters and offer practical reference for GP control and safe, high‐intensity mining under multilayer hard roof conditions.

22 December 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HGHui Gao
Hui Gao
CQChenlong Qian
Chenlong Qian
XWXufeng Wang
Xufeng Wang
CRChongpeng Ren
Chongpeng Ren
YXYuanman Xie
Yuanman Xie
In response to ground pressure problems such as an abnormal increase in working face support resistance and severe roadway floor heave induced by the lateral composite structure of the multi-layer thick and hard roof in the 11,223 working face of Xiaojihan Coal Mine, based on the triangle area slip theory, this study reveals that the lateral triangle area forms a composite structure of “cantilever beam + masonry beam”. The stress transfer and unloading mechanism of the high- and low-position thick and hard rock stratum fracturing was clarified. A technical scheme is proposed and implemented to weaken the high- and low-position thick and hard rock strata through horizontal Long Directional Borehole synergistic fracturing and optimize stress transfer. The results show that (1) the lateral overlying rock forms a triangular slip area under the clamping of the cantilever and masonry beam structures. This composite structure is the main reason for the increase in the support resistance at the end of the working face and the stress concentration of the roadway surrounding rock. (2) The influence law that the load of the triangular slip area is mainly influenced by the length of the broken block, and the breaking angle was clarified. The distribution characteristics of the load in the lateral triangle area under the fracturing of thick and hard rock strata at different horizons are mastered. When the length of the key block is reduced by 40%, the supporting force F1 of the rock mass below the broken block on it is reduced by 62.5%, and the supporting force F2 and the frictional force F3 of the end part on the broken area of the triangle area are reduced by 34.6%. (3) The fracturing of high- and low-position thick and hard rock strata can collaboratively weaken the stress accumulation at high and low positions. Fracturing the low-position thick and hard rock strata can cut off the low-position “cantilever beam” structure, and fracturing the high-position thick and hard rock strata at the same time can transfer the load of the “masonry beam”. Through simulation, it is seen that the stress peaks at the end of the working face and the roadway surrounding rock during synergistic fracturing are, respectively, reduced by 12.2% and 28.9%. (4) An industrial test of directional drilling hydraulic fracturing of lateral thick and hard rock strata is carried out, achieving the regulation effect that the average value of the support resistance at the end of the cycle is reduced from 27.2 MPa to 22.7 MPa, and the floor heave amount of the reused roadway is reduced by 62.3%. The research results can provide a reference for the advanced treatment of the strong ground pressure area of the multi-layer thick and hard roof.