The Forward Osmosis (FO) membrane was the core of FO technology. Obtaining a high water flux while maintaining a low reverse solute flux has historically been considered the gold standard for a perfect FO membrane. In a thin-film composite FO membrane, the performance of the membrane was determined not only by the material and structure of the porous support layer but also by the structural and chemical properties of the active selective layer. Researchers have selected numerous sorts of materials for the FO membranes in recent years and have produced exceptional achievements. Herein, the performance of the modified FO membrane constructed by introducing new two-dimensional nanomaterial MXene nano-sheets to the interfacial polymerization process was investigated, and the performance of these modified membranes was investigated using a variety of characterization and testing methods. The results revealed that the MXene nano-sheets played an important role in improving the performance of the FO membrane. Because of the hydrophilic features of the MXene nano-sheets, the membrane structure may be tuned within a specific concentration range, and the performance of the modified FO membrane has been significantly enhanced accordingly. The optimal membrane water flux was boosted by around 80%, while its reverse solute flux was kept to a minimum of the resultant membranes. It showed that the addition of MXene nanosheets to the active selective layer could improve the performance of the FO membrane, and this method showed promising application prospects.

The degradation and detachment of the polyamide (PA) layer for the conventional thin-film composite (TFC) membranes due to chemical disinfectants cleaning with chlorine and material difference of PA layer and substrate are two major bottlenecks of forward osmosis (FO) technology. In this study, a new type of FO membranes was first prepared by controlling dopamine (DA) as the sole amine in the aqueous phase and the reaction with trimesoyl chloride (TMC) as the acyl chloride during interfacial polymerization (IP) process. The influence of membrane synthesis parameters such as monomer concentration, pH of the aqueous phase, IP reaction time and IP temperature were systematically investigated. The optimized membrane showed both improved structure stability and chlorine resistance, more so than the conventional TFC membrane. In general, novel DA/TMC TFC membranes could be an effective strategy to synthesize high-performance FO membranes with excellent structural stability and chlorine resistance.

The degradation and detachment of the polyamide (PA) layer in thin-film composite (TFC) membranes due to chlorine based chemical cleaning and material difference of PA layer and substrate are two major bottlenecks of forward osmosis (FO) technology. In this study, a new type of FO membranes were prepared by controlling self-polymerization of dopamine (DA) in the aqueous phase and the reaction with trimesoyl chloride (TMC) during interfacial polymerization (IP) process. These membranes were characterized by attenuated total reflection Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FESEM) and water contact angle measurements. The influence of synthesis parameters such as pH of the aqueous phase, reaction time, temperature, and monomer concentrations were systematically investigated. The optimized membrane showed enhanced structure stability in ethanol (7.1 times higher) and chlorine resistance (72.3 times higher) than the conventional Piperazine(PIP)/TMC membrane due to（poly-dopamine）PDA bio-adhesion and polyester groups in the membrane structure. In general, DA/TMC membranes could be an effective strategy to fabricate high-performance FO membranes with excellent structural stability and chlorine resistance.