This paper presents the electromagnetic wave (EW) absorption properties in terms of complex permittivity and permeability of novel green composites coconut fiber coir and charcoal powder materials. The samples were fabricated using the raw agricultural waste coconut fiber coir, charcoal powder, epoxy resin and hardener with varied composition. The dielectric properties of the materials were characterized using two-port waveguide measurement method over the X-band frequency (8.2 – 12.4GHz). The average permittivity value measured is approximately 3.00 with 10wt% charcoal has the highest permittivity of 3.59. Apart from that, all samples exhibit good reflection loss of better than -25dB which means more than 99% absorption rate. The result shows the composite material is a promising organic material for electromagnetic absorber applications.

This paper presents the analysis of dielectric properties of agricultural waste for microwave communication application such as microwave absorber and antenna. The residues products – rice straw, rice husk, banana leaves and sugar cane bagasse were studied in the range between 1-20GHz. Firstly, the 2 types of resins namely Epoxy der 331 and Polyamine clear hardener were mixed with the agricultural waste materials to produce the small size of agricultural waste sample. Then, the sample were measured using PNA network analyzer. The permittivity and tangent loss of different agricultural waste samples have been measured using dielectric probe technique. Besides, other objectives of this paper is to replace the conventional printed circuit board (PCB) using FR4, Taconic, and Roger material with the agricultural waste material. Besides that, the different percentage of filer for each agricultural waste materials were also investigated to specify the best material to be used as the substrate board and as the resonant material. the result shows the average of dielectric constants and the average of the tangent loss of agricultural waste materials.