In this work, the influences of special environments (hydrogen gas and high temperature, high humidity environments) on the performance of three types of SiC MOSFETs are investigated. The results reveal several noteworthy observations. Firstly, after 500 h in a hydrogen gas environment, all the SiC MOSFETs exhibited a negative drift in threshold voltage, accompanied by an increase in maximum transconductance and drain current (@ V_GS/V_DS = 13 V/3 V). This phenomenon can be attributed to that the hydrogen atoms can increase the positive fixed charges in the oxide and increase the electron mobility in the channel. In addition, high temperature did not intensify the impact of hydrogen on the devices and electron mobility. Instead, prolonged exposure to high temperatures may induce stress on the SiO₂/SiC interface, leading to a decrease in electron mobility, subsequently reducing the transconductance and drain current (@ V_GS/V_DS = 13 V/3 V). The high temperature, high humidity environment can cause a certain negative drift in the devices’ threshold voltage. With the increasing duration of the experiment, the maximum transconductance and drain current (@ V_GS/V_DS = 18V (20 V)/3 V) gradually decreased. This may be because the presence of moisture can lead to corrosion of the devices’ metal contacts and interconnects, which can increase the devices’ resistance and lead to a decrease in the devices’ maximum transconductance and drain current.

Ni-xCu/Sn soldering joints were aged at 200 °C, and the microstructure evolution and mechanical properties during the solid-state reaction were studied under shear loading. Results showed that the intermetallic compounds (IMCs) exhibited a Cu content-dependent transformation from the (Ni,Cu)₃Sn₄ phase to the (Cu,Ni)₆Sn₅ phase at the Ni-xCu/Sn interface. Furthermore, a Cu₃Sn layer was observed exclusively at the Cu/Sn interface. The shear strength of the soldering joints after thermal aging exhibited an initial decrease followed by an increase, except for a significant enhancement at the Cu content of 60 wt.%. In addition, the evolution law of mechanical properties and failure mechanism of the thermal aging joints were elucidated based on the fracture microstructure and the fracture curve of the joints.