Due to the large bending of turbine blades, there is strong three-dimensional flow in cascade channel, the three-dimensional flow at the endwall of blades generates extremely complex heat transfer characteristics. The design concept of high heat load turbine blades, particularly comprehensive optimization of flow and heat transfer at the endwall, has gained increasing attention. In this paper, we have developed a three-dimensional endwall parameterized modeling platform based on Body-Fitting Coordinates and introduced a novel approach for streamwise direction and normal direction concerning endwall profile construction. The endwall modeling was optimized using Genetic Algorithm to obtain a modified one with low heat transfer level on the premise that the aerodynamic loss is not increased. The analysis indicates that the reduction of aerodynamic loss with the modified endwall is relatively marginal, whereas the heat transfer intensity on the endwall surface experiences a significant decrease. Additionally, employing an endwall model can effectively mitigate the lateral pressure gradient in the cascade channel, which exerts a pronounced influence on suppressing secondary vortex development in the cascade.
Gas turbine engines operate in extremely harsh environments, subjecting turbines to high aerodynamic and thermal loads. In this context, non-axisymmetric endwalls have emerged as an effective strategy for reducing aerodynamic losses and mitigating heat transfer on the endwall surfaces, leading to their widespread adoption in turbine designs. This study presents an optimization of the endwall shape for a turbine guide vane from a real engine, employing the multi-island genetic algorithm. The optimization objectives are the endwall surface heat transfer coefficient and the total pressure loss coefficient at the blade outlet. The findings indicate that the modified endwall disrupts the horseshoe vortex structure at the blade leading edge, adversely influencing the formation and development of passage vortices within the cascade. Notably, this modification results in a significant reduction in aerodynamic losses and a decrease in the heat transfer coefficient on the endwall surface. Specifically, the total pressure loss coefficient at the outlet is reduced by 1.96%, while the endwall surface heat transfer coefficient decreases by 3.05%. These results underscore the considerable effectiveness of the optimized endwall design in enhancing turbine performance.
This paper investigates the complex flow characteristics and parameter prediction methods for axial-inlet cover-plate cavities in pre-swirl systems numerically. Using a full-annulus three-dimensional computational model, the flow mechanisms of cover-plate cavities are compared between axial and radial inlet configurations. The analysis reveals that the axial-inlet configuration exhibits intensified non-axisymmetric vortex pairs in the low-radius region due to axial inflow inertia. These vortex structures enhance radial angular momentum exchange, leading to a substantial inlet angular momentum deficit that consequently reduces swirl ratios and pressure coefficients relative to the radial-inlet configuration. Furthermore, parametric studies demonstrate that small gap ratio amplifies circumferential flow non-uniformity through strong impingement effects, while elevated inlet swirl ratio significantly extends the source region boundary by strengthening centrifugal forces. To address the prediction discrepancies in existing models, this work proposes a modified correlation for the effective inlet swirl ratio that account for the inlet momentum loss and develops a new predictive model for the edge of source region incorporating centrifugal effects. These physics-based corrections, validated against simulation data, significantly improve the prediction accuracy for axial-inlet cover-plate cavities compared to conventional models.