The design of manifold-coupled multiplexers for wideband applications is considered in this paper. A systematic procedure, based on the sequential connection of filters to the manifold and subsequent adjustment of the interconnection elements, is presented. The filters are attached to the manifold without using stubs in order to minimize the effect of spurious resonances. The interconnection elements, the manifold, and the remaining filters are considered as the first inverter of each new filter that is attached. This technique has been applied to several practical examples. The obtained results validate the proposed design methodology.

In this paper, two novel compact diplexers for satellite applications are presented. The first covers the Ku-band with two closely spaced channels (Ku-transmission band: 10.7-13 GHz and Ku-reception band: 13.75-14.8 GHz). The second is wider than the first (overall bandwidth up to 50%) achieves the suppression of the higher order modes, and covers the Ku/K-band with a reception channel between 17.2 and 18.5 GHz. Both diplexers are composed of two novel bandpass filters, joined together with an E-plane T-junction. The bandpass filters are designed by combining a low-pass filtering function (based on λ/4-step-shaped band-stop elements separated by very short waveguide sections) and a high-pass filtering structure (based on the waveguide propagation cutoff effect). The novel diplexers show a very compact footprint and very relaxed fabrication tolerances, and are especially attractive for wideband applications. A prototype Ku/K-band diplexer has also been fabricated by milling. Measurements show a very good agreement with simulations, thereby demonstrating the validity and manufacturing robustness of the proposed topology.

In this paper, a new synthesis and design methodology is presented and applied for the fast and accurate design of inductive rectangular waveguide filters. By using this technique, the dimensions of both homogeneous and inhomogeneous filters can be successfully synthesized for almost any practical filter bandwidth, return loss, or filter order. This novel technique is based on a prototype with additional degrees of freedom, able to match the response of the different filter components in a wideband frequency range, and an elaborated design procedure that fully exploits this flexibility. During the design procedure, the prototype and the real structure are continuously aligned in order to have the same electromagnetic behavior and jointly evolve to obtain an equiripple response. Once the final prototype has been synthesized, excellent filter dimensions can be extracted that, in most cases, do not require further optimization. Examples will show the outstanding performance of the proposed design technique in terms of versatility, accuracy, and CPU time.

In this paper, a new systematic technique to design manifold-coupled multiplexers in waveguide technology is proposed. The new technique uses generalized low-order electromagnetic (EM) distributed models, which constitute a half-way point between the fast, but imprecise, analytical models, and the more accurate, but costly, full-wave EM models. The method can be applied to contiguous and noncontiguous channel multiplexers, in both E-plane or H-plane configurations. This paper covers the complete design procedure for manifold multiplexers, starting from the required specifications and finishing with the physical dimensions. After explaining the general design technique for multiplexers with channel filters based on transmission-line resonators, the method is specialized for the design of classic multiplexers with circular-waveguide dual-mode filters. As a further application example, the same methodology is also used for the design of a nonconventional tuningless wideband multiplexer with a new type of rectangular waveguide filters. This paper is concluded with a comparison between simulation and measurements for the wideband multiplexer. Excellent agreement between measurements and simulations are demonstrated, thereby validating the complete design procedure.

The design and physical implementation of hybrid folded rectangular waveguide filters providing multiple transmission zeros (TZs) below the passband are considered in this paper. These structures offer great flexibility to locate the TZs in a wide frequency range. Different implementations have been considered, each one offering certain advantages in terms of ease of manufacture, number of TZs, and their separation from the passband. A simple design procedure is also described. Measurements of a manufactured five-pole filter prototype and simulations fully validate the novel configurations proposed in this study.

This letter proposes a spherical 3-D Smith Chart suitable for representing both active and passive microwave circuits. Using the mathematical concept of the Riemann sphere, the extended reflection coefficient plane is transformed into the surface of the unit sphere. Since the proposed Smith Chart compiles the whole complex plane, all possible loads are included. A simple graphic tool is thus obtained that successfully unifies active and passive circuits. In addition, lossy lines with complex characteristic impedances can also be represented. The letter presents the 3-D Smith Chart, provides its main governing equations, and also enumerates its more important properties.