Fernando Teberio

Fernando Teberio

Auto-generated profile, based on publicly available information

Fernando Teberio

Electrical and Electronic Engineering Department, Public University of Navarre, Pamplona, Spain

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 November 2013 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
IAIvan Arregui
Ivan Arregui
FTFernando Teberio
Fernando Teberio
Israel ArnedoIsrael Arnedo
Israel Arnedo
ALAintzane Lujambio
Aintzane Lujambio
MCMagdalena Chudzik
Magdalena Chudzik
MLMiguel A. G. Laso
Miguel A. G. Laso
In this paper, a method to design high-power low-pass harmonic filters in rectangular waveguide technology is proposed. The new filters consist of a collection of smooth E-plane bandstop elements along the propagation direction and a smooth variation of the filter width. This yields to a broad rejected band for the fundamental TE10 mode, together with higher-order ( TEn0 and non- TEn0) mode suppression. Two different examples with stringent requirements of the space industry are provided to demonstrate the capabilities of the new methodology. By means of high-power simulations and an extensive measurement campaign, it will be shown that the smoothness of the filter profile guarantees high-power operation even with small minimum mechanical gaps. Moreover, unlike classical techniques, our method is not restricted to filters with small gaps. Hence, filters with larger gaps (always fulfilling the demanding frequency specifications) are fabricated for even higher power-handling performance.

24 April 2017 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FTFernando Teberio
Fernando Teberio
IAIvan Arregui
Ivan Arregui
Pablo Soto PachecoPablo Soto Pacheco
Pablo Soto Pacheco
MLMiguel A. G. Laso
Miguel A. G. Laso
VBVicente E. Boria
Vicente E. Boria
MGMarco Guglielmi
Marco Guglielmi
In this paper, two novel compact diplexers for satellite applications are presented. The first covers the Ku-band with two closely spaced channels (Ku-transmission band: 10.7-13 GHz and Ku-reception band: 13.75-14.8 GHz). The second is wider than the first (overall bandwidth up to 50%) achieves the suppression of the higher order modes, and covers the Ku/K-band with a reception channel between 17.2 and 18.5 GHz. Both diplexers are composed of two novel bandpass filters, joined together with an E-plane T-junction. The bandpass filters are designed by combining a low-pass filtering function (based on λ/4-step-shaped band-stop elements separated by very short waveguide sections) and a high-pass filtering structure (based on the waveguide propagation cutoff effect). The novel diplexers show a very compact footprint and very relaxed fabrication tolerances, and are especially attractive for wideband applications. A prototype Ku/K-band diplexer has also been fabricated by milling. Measurements show a very good agreement with simulations, thereby demonstrating the validity and manufacturing robustness of the proposed topology.

14 September 2012 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MCMagdalena Chudzik
Magdalena Chudzik
Israel ArnedoIsrael Arnedo
Israel Arnedo
ALAintzane Lujambio
Aintzane Lujambio
IAIvan Arregui
Ivan Arregui
IGIon Gardeta
Ion Gardeta
TLTxema Lopetegi
Txema Lopetegi
In this paper, we propose and demonstrate a new technique for the design of arbitrary-order differentiators, intended for ultra-wideband (UWB) applications in microwave coupled-line technology. The technique employs an exact analytical series solution for the synthesis problem derived by the authors from the coupled-mode theory. This solution allows for the synthesis of microwave devices with arbitrary frequency responses, only limited by the principles of causality, passivity, and stability. The method has been successfully applied in the past to the design of two-port waveguide and transmission-line components operating in a reflection-type configuration. Here, the synthesis technique is extended to coupled-line structures, where the input port is matched at all frequencies and the reflected signal is redirected to the coupled port, enabling an effective transmission-type operation for the device. First-, second-, third-, and fourth-order UWB differentiators have been successfully designed, fabricated, and measured, validating the general design technique proposed.

15 June 2015 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
FTF. Teberio
F. Teberio
IAI. Arregui
I. Arregui
AGA. Gomez-Torrent
A. Gomez-Torrent
EME. Menargues
E. Menargues
Israel ArnedoIsrael Arnedo
Israel Arnedo
MLM. A. G. Laso
M. A. G. Laso
In this letter, the design of a compact high-power waveguide low-pass filter with low insertion loss, all-higher order mode suppression, and stopband rejection up to the third harmonic, intended for Ka-band satellite applications, is presented. The method is based on step-shaped bandstop elements separated by very short (ideally of zero length) waveguide sections easily manufactured by low-cost computer-controlled milling. Matching is achieved by short input/output networks based on stubs whose heights are optimized following classical approaches. The novel filter presents a reduction in insertion loss and a remarkable increase in the high-power handling capability when compared to the classical waffle-iron filter and alternative solutions previously proposed, while the out-of-band frequency behavior remains unaltered.

20 July 2016 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FTFernando Teberio
Fernando Teberio
IAIvan Arregui
Ivan Arregui
AGAdrian Gomez-Torrent
Adrian Gomez-Torrent
IAIsrael Arnedo
Israel Arnedo
MCMagdalena Chudzik
Magdalena Chudzik
MLMiguel A. G. Laso
Miguel A. G. Laso
A novel chirping technique is applied to the design of very high-power waveguide harmonic low-pass filters. The technique could be used, for instance, to avoid multipactor testing in multicarrier systems such as the output multiplexer of a communications satellite. The novel chirped filter shows low insertion loss, all higher order mode suppression, and broad stopband rejection up to the third harmonic. This paper focuses on the maximization of the filter power-handling capability without affecting its excellent frequency behavior. Given a certain frequency response, the E-plane mechanical gap of the structure and the length (in the propagation direction) of the waveguide sections between its constituent bandstop elements can be considered to improve the high-power behavior. However, the power performance may not be sufficient yet in some applications if we wish, for instance, multipactor testing to be avoided. This becomes feasible by chirping the length (in the propagation direction) of the bandstop elements. An example for Ku band is discussed for relevant frequency specifications. An improvement from $\sim 8$ kW (non-chirped filter) to more than 100 kW (chirped filter) is obtained. As a reference, the equivalent waffle-iron filter can handle only 0.15 kW. Such high-power threshold levels have never been reported before for such kind of filters.

24 May 2012 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
IAI. Arregui
I. Arregui
FTF. Teberio
F. Teberio
Israel ArnedoIsrael Arnedo
Israel Arnedo
ALA. Lujambio
A. Lujambio
MCM. Chudzik
M. Chudzik
MLM. A. G. Laso
M. A. G. Laso
In this letter, a new method for the design of high-power low-pass harmonic filters in rectangular waveguide technology is proposed. Based on a 2-D arrangement of bandstop elements of sinusoidal profile, a filter with a wide spurious-free frequency response (up to the third harmonic) for the fundamental TE10 mode, as well as higher-order TEn0-mode suppression, is achieved. Compared to the classical waffle-iron solution, the novel proposal has a highly increased power-handling capability for the same frequency specifications.