Айжан Байкунирова

Айжан Байкунирова


Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2026 in Construction Materials
Verified
Journal Article
Open access
PDF file
DADaniyar Akbulatovich Akhmetov
Daniyar Akbulatovich Akhmetov
Aleksej AniskinAleksej Aniskin
Aleksej Aniskin
BABaitak Apshikur
Baitak Apshikur
АБАйжан Байкунирова
Айжан Байкунирова
This study assessed whether electrochemical activation of mixing water can enhance autoclaved aerated concrete (AAC), in which fly ash replaces sand as the siliceous component. Mixing water was electrolyzed in a diaphragm-type “Melesta” unit to obtain the catholyte and anolyte, and fly ash was pre-exposed to the catholyte for up to 15 min. The material’s behavior was evaluated using slurry flow tests, scanning electron microscopy, Fourier-transform infrared spectroscopy, macropore-uniformity analysis, mercury intrusion porosimetry, and shrinkage and short-term durability indicators. At an approximately constant density class near 600 kg/m3, the catholyte-pretreated fly-ash AAC mixes showed a near-monotonic increase in compressive strength with increasing fly-ash replacement (relative to the sand-based reference), while fresh-mixture fluidity decreased. The pore structure became more uniform, as indicated by a decrease in the standard deviation of pore diameters from 0.175 to 0.133 mm, and porosimetry indicated a higher micro-porosity fraction in fly-ash AAC than in sand-based AAC. Capillary shrinkage remained essentially unchanged, and short-term durability indicators (durability coefficients after 25 cycles) showed a small improvement. Overall, electrochemically activated water promoted a more regular pore system and stronger interpore walls under autoclave curing, supporting higher fly-ash utilization without loss of dimensional stability. The results are limited to one fly-ash source (Ekibastuz TPP); transferability should be verified using ashes with different glass content, fineness, and carbon/LOI.

Verified
Journal Article
Open access
PDF file
АБАйжан Байкунирова
Айжан Байкунирова
SUSaken Uderbayev
Saken Uderbayev
AAAkbota Arystanbek
Akbota Arystanbek
OSOlga Smirnova
Olga Smirnova
СНСактаганова Наргуль
Сактаганова Наргуль
KAKanat T. Alenov
Kanat T. Alenov
The present study investigates the development of non-autoclaved aerated concrete (NAAC) incorporating rice husk ash (RHA)-derived amorphous silica, polypropylene microfibers, and a polycarboxylate-based superplasticizer to improve mechanical performance and durability while maintaining low density and thermal conductivity. Experimental investigations included density, compressive strength, thermal conductivity, water absorption, X-ray diffraction (XRD), microstructural observations, and TG–DTA analysis. The developed compositions containing 5–7% RHA and 0.10–0.20% polypropylene microfibers achieved compressive strength values of 4.5–4.8 MPa at densities of 520–560 kg/m3, which are comparable to or higher than values commonly reported for non-autoclaved aerated concrete of similar density. Thermal conductivity decreased to 0.12–0.13 W/(m·K), while water absorption was reduced to 15–18%. XRD, microstructural, and TG–DTA analyses suggested enhanced hydration reactions and improved development of the cementitious matrix due to pozzolanic interaction between amorphous silica and calcium hydroxide. The incorporation of polypropylene microfibers was associated with improved structural homogeneity of the developed NAAC compositions, whereas the superplasticizer enhanced mixture homogeneity and pore stability. The results suggest that the combined use of agricultural waste-derived silica and fiber reinforcement provides an effective approach for producing sustainable and energy-efficient NAAC without autoclave curing.

7 August 2026 in Construction Materials
Verified
Journal Article
Open access
PDF file
AAAkbota Arystanbek
Akbota Arystanbek
SUSaken Uderbayev
Saken Uderbayev
INIgor Nedoseko
Igor Nedoseko
АБАйжан Байкунирова
Айжан Байкунирова
K(Kazakhstan; saken_uderbayev@mail.ru (S.U.); gulnazzhak.@gmail.com (G.Z.); zhapakhova@mail.ru (A.Z.)
Kazakhstan; saken_uderbayev@mail.ru (S.U.); gulnazzhak.@gmail.com (G.Z.); zhapakhova@mail.ru (A.Z.)
KAKanat T. Alenov
Kanat T. Alenov
This study evaluates a wet-activated multicomponent organomineral modifier for sustainable concrete. The modifier was produced by co-grinding Portland cement and rice husk ash (RHA) in the presence of Sika® ViscoCrete®-20HE and was subsequently combined with polypropylene fibers. Three modified mixtures were tested after 28 days of curing and compared with a control concrete. The modified concretes achieved compressive strengths of 42.2–45.0 MPa, compared with 36.8 MPa for the control. Among the tested formulations, Mix 2, containing 6 wt.% RHA, 4 wt.% polypropylene fibers, and 1.3 wt.% superplasticizer, showed the most favorable overall performance. Its compressive and flexural strengths reached 45.0 and 5.8 MPa, corresponding to observed differences of 22.3% and 26.1%, respectively, relative to the control formulation. Because the complete mixture compositions and w/c ratios differed, these comparisons do not isolate the contribution of any individual constituent. Fracture toughness increased from 1.15 to 2.16 MPa·m1/2, water absorption decreased from 6.8% to 5.1%, and freeze–thaw resistance increased from 138 to 242 cycles. Qualitative SEM and XRD observations showed morphological and phase-related differences between selected control and modified specimens; however, these observations did not establish the causes of the measured performance differences. In addition, because no compositionally identical non-activated RHA reference or direct reactivity test was included, the independent effect of wet activation on RHA reactivity could not be established. The investigated integrated modifier therefore shows potential for improving concrete performance while enabling the beneficial use of RHA.