With the rapid increase in the renewable energy penetration rate in distribution networks, the volatility and uncertainty on the power supply side have become prominent; thus, it is urgent to fully utilize the regulation potential of the flexible load on the user side to maintain the dynamic balance of power. A multi-level evaluation method for flexible load regulation potential based on ensemble clustering is proposed in the paper. First, a data-driven approach based on ensemble clustering is adopted to quantify the user-level regulation potential of flexible load. Second, the bus-level regulation potential of the flexible load is obtained by aggregation calculation. Finally, a quantitative evaluation of the system-level regulation potential of flexible load in the distribution network is realized by constructing three optimization models with different objectives. Case studies show that the proposed method can effectively evaluate the regulation potential of flexible load in the distribution network from multiple levels, i.e., user level, bus level, and system level.
In remote power supply scenarios, long-distance transmission cables introduce voltage drops due to their inherent impedance, leading to load undervoltage. Additionally, dynamic current variations may cause significant fluctuations in load voltage, potentially exceeding the allowable voltage range. To address these challenges, this paper proposes a sinusoidal-excitation-based impedance detection method, which can achieve source-side single-ended impedance detection of the cable. Based on the detection results, a composite control strategy is developed to compensate for both steady-state and transient voltage drops, effectively mitigating the impact of current variations on load-voltage stability. The operating principle and parameter design are analyzed. Experimental testing is carried out using a hardware prototype with an equivalent R-L test loop, and the verification and comparative results indicate that the proposed method effectively resolves voltage drop and response delay issues caused by long cables, achieving accurate and stable remote voltage regulation.