With the rapid increase in the renewable energy penetration rate in distribution networks, the volatility and uncertainty on the power supply side have become prominent; thus, it is urgent to fully utilize the regulation potential of the flexible load on the user side to maintain the dynamic balance of power. A multi-level evaluation method for flexible load regulation potential based on ensemble clustering is proposed in the paper. First, a data-driven approach based on ensemble clustering is adopted to quantify the user-level regulation potential of flexible load. Second, the bus-level regulation potential of the flexible load is obtained by aggregation calculation. Finally, a quantitative evaluation of the system-level regulation potential of flexible load in the distribution network is realized by constructing three optimization models with different objectives. Case studies show that the proposed method can effectively evaluate the regulation potential of flexible load in the distribution network from multiple levels, i.e., user level, bus level, and system level.
In remote power supply scenarios, long-distance transmission cables introduce voltage drops due to their inherent impedance, leading to load undervoltage. Additionally, dynamic current variations may cause significant fluctuations in load voltage, potentially exceeding the allowable voltage range. To address these challenges, this paper proposes a sinusoidal-excitation-based impedance detection method, which can achieve source-side single-ended impedance detection of the cable. Based on the detection results, a composite control strategy is developed to compensate for both steady-state and transient voltage drops, effectively mitigating the impact of current variations on load-voltage stability. The operating principle and parameter design are analyzed. Experimental testing is carried out using a hardware prototype with an equivalent R-L test loop, and the verification and comparative results indicate that the proposed method effectively resolves voltage drop and response delay issues caused by long cables, achieving accurate and stable remote voltage regulation.
The Gaussian Mixture Model (GMM) is commonly used to formulate the probabilistic model for quantifying uncertainties in renewable generation. However, traditional static probabilistic models may not efficiently adapt and learn from newly forecasted and measured data. In this paper, we propose a recursively updated probabilistic model that leverages a recursive estimation method to update the parameters of the GMM based on continuously arriving data of renewable generation. This recursive modeling approach effectively incorporates new observations while discarding outdated samples, enabling the tracking of time-varying uncertainties in renewable generation in an incremental manner. Furthermore, we introduce an extra calibration stage to enhance the long-term accuracy of the probabilistic model after a large number of incremental updates. The main contribution is to address the potential degradation of performance caused by suboptimal incremental updates accumulated over time. Numerical tests demonstrate that the proposed model achieves 5–10% higher log likelihood in characterizing renewable generation uncertainties compared to purely recursive models, while reducing computational time by three to four orders of magnitude (1000 to 10,000 times) relative to conventional EM. These results highlight the proposed model’s suitability for real-time probabilistic modeling of renewable generation, with potential applications in system operation.