CeO2 particles were synthesized via a hydrothermal method to investigate the influence of precursor molarity and reaction time on their structural, optical, and adsorption characteristics. Ce(NO3)3·6H2O served as the cerium source, while PVP and Triton X-100 acted as surfactants to regulate nucleation and particle growth. XRD and Raman analyses confirmed the formation of single-phase cubic fluorite CeO2, whereas FTIR spectra verified the presence of Ce–O bonding. SEM observations revealed that a decreasing precursor molarity led to smaller and more uniform particles, while prolonged reaction times enhanced crystallinity. UV–Vis DRS and XPS analyses indicated that both the band gap (3.06–3.12 eV) and the Ce3+/Ce4+ ratio were governed by oxygen vacancies, demonstrating defect-mediated redox behavior. Adsorption studies using methyl orange (MO) dye followed pseudo-second-order kinetics (R2 > 0.99), indicating chemisorption as the dominant mechanism. The CP1-8 sample exhibited the highest dye removal efficiency (87%) under acidic conditions (pH < pHPZC). These findings demonstrate that controlled hydrothermal synthesis enables precise tuning of CeO2 morphology, defect density, and surface chemistry, yielding efficient adsorbent materials for environmental remediation applications.
Graphene oxide (GO) is one of the members of carbon-based nanomaterials and can be featured as graphene structure decorated with various oxygenated functional groups. Recently, various methods have been found for producing carbon-based nanomaterials with enhanced efficiency in several applications. The chemical process involves oxidizing graphite to GO using a powerful oxidizing chemical. Hummers method is one of the most known and versatile method for the production of GO nanomaterials because of its ease of application, parameter controllability and high yield. This process enables graphite oxidation and exfoliation into single- or multi-layered GO sheets. Exfoliation, the separation of graphene or graphitic layers, is a critical process in GO synthesis. Since exfoliation separates multilayered graphite oxide flakes or particles, it forms single layer GO by forcing oxidizing agents or solvent molecules between layers. The sonication process can exfoliate the oxidized layers, resulting in the formation of GO structure when the exfoliated layers consist of only one or a few layers of carbon atoms. Therefore, sonication procedure is among the key parameters of Hummers method that influences the characteristics of GO-based nanomaterials. In this study, the impact of sonication duration time and power parameters on morphological and structural characteristics of GO development was examined. For this purpose, characterization studies were performed by using Scanning electron microscope (SEM), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), UV-Vis spectroscopy and Raman spectroscopy analysis. The findings revealed that the increase in sonication power and time led to an increase in defects in the resulting GO structure.
30 June 2024 in Sakarya University Journal of Science
Graphene oxide (GO) has recently attracted attention with its unique chemical and physical properties and serves as a raw material for graphene-based materials. GO has been produced for decades by the Hummers Method with the oxidation process of graphite. The properties and structure of GO are significantly affected by the production parameters of Hummers Method. In this study, the effect of the water content on the oxidation level of GO structure was investigated. GO was produced with different amounts of water in the oxidation stage of Hummers Method. The structural characterizations of produced GO were carried out by X-ray Diffraction Technique (XRD), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), Energy Dispersive X-ray Spectroscopy (EDS), UV-Visible Spectroscopy (UV-Vis) and Raman Spectroscopy. Additionally, morphological and thermal characterization of the produced GO samples were performed by Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA)/Differential Thermal Analysis (DTA), respectively. According to XRD, FTIR, XPS, and EDS results, it was determined that the oxidation degree of GO decreased with increasing amount of water. Besides, it was revealed that the post-oxidation step generated more defects in the basal plane of graphene according to the results of the Raman Analysis. Also, it was observed that GO had a smoother surface and was found to have higher thermal stability with increasing amounts of water. The results show that the post-oxidation step reduces the oxidation degree of GO, increases the amount of the defect, provides a less wrinkled structure, and improves the thermal stability of GO.
Los intercambiadores de calor (IC) están formados por tubos de cobre y acero y se utilizan para calentar y enfriar el aire del ambiente. Uno de los principales problemas que se observan en los IC son las fugas en las tuberías de cobre. En este estudio, se examinaron en detalle muestras de tuberías de cobre fallidas y en buen estado de funcionamiento utilizadas durante diferentes periodos de tiempo. Los análisis microestructurales se realizaron mediante microscopía óptica (MO) y microscopía electrónica de barrido (MEB) para detectar los casos de corrosión en las superficies de las tuberías de cobre. Además, se definieron los productos de corrosión de las muestras mediante difracción de rayos X (DRX), espectroscopia de energía dispersiva (EDS) y análisis de espectroscopia infrarroja con transformada de fourier (FTIR). Se observó la formación de túneles interconectados en la sección transversal de la muestra de tubería de cobre fallida que tenían dimensiones microscópicas y productos de corrosión. En consecuencia, todos los resultados de los análisis que se obtuvieron de las muestras apuntaban a un mecanismo de corrosión conocido como corrosión por nido de hormiga. Se concluyó que la razón principal de la corrosión estaba relacionada con los aditivos de tipo etilenglicol que se utilizaban en los IC junto con el agua de red.