We report on the laser pulse output of 339 J centered at 800 nm from a chirped-pulse amplification (CPA) Ti:sapphire laser system at the Shanghai Superintense Ultrafast Laser Facility. The experimental results demonstrated that the parasitic lasing as well as the transverse amplified spontaneous emission of the homemade 235-mm-diameter Ti:sapphire final amplifier were suppressed successfully via the temporal dual-pulse pumped scheme and the index-matching liquid cladding technique. The maximum pump-to-signal conversion efficiency of 32.1% was measured for the final amplifier. With a compressor transmission efficiency of 64% and a compressed pulse duration of 21 fs obtained for the sample light at a lower energy level, this laser system could potentially generate a compressed laser pulse with a peak power of 10.3 PW. The experimental results represent significant progress with respect to the CPA laser.

The further practical applications of halide perovskite quantum dots (QDs) are blocked by problems of instability and nonradiative Auger recombination manifested as photoluminescence blinking. Here, single core/shell structured perovskite semiconductor QDs are successfully fabricated by capping CsPbBr₃ QD core with CdS shell. It is demonstrated that CsPbBr₃/CdS core/shell QDs exhibit ultrahigh chemical stability and nonblinking photoluminescence with high quantum yield due to the reduced electronic traps within the core/shell structure. Efficiency of amplified spontaneous emission exhibits obvious enhancement compared to that of pure CsPbBr₃ QDs, originating from the mitigated competition between stimulated emission and suppressed nonradiative biexciton Auger recombination. Furthermore, low‐threshold whispering‐gallery‐mode lasing with a high‐quality factor is achieved by incorporating CsPbBr₃/CdS QDs into microtubule resonators. Density functional theory (DFT)‐based first‐principles calculations are also performed to reveal the atomic interface structure, which supports the existence of CsPbBr₃/CdS structure. An interesting feature of spatially separated charge density at CsPbBr₃/CdS interface is found, which may greatly contribute to the suppressed Auger recombination. The results provide a practical approach to improve the stability and suppress the blinking of halide perovskite QDs, which may pave the way for future applications for various optoelectronic devices.

We report on the generation of 192.3 J centered at 800 nm wavelength from a chirped-pulse amplification (CPA) Ti:sapphire laser system. The experimental results demonstrate that parasitic lasing can be suppressed successfully in the final amplifier based on a Ti:sapphire crystal of 150 mm in diameter. An over 50% pump-to-signal conversion efficiency was measured for the final amplifier by optimizing the time delay of two pump pulses and enhancing the injected seed energy. With 72% compressor throughput efficiency and 27 fs long compressed pulse duration obtained at a lower energy level, this laser could potentially support a compressed laser pulse of 5.13 PW peak power. The experimental results represent notable progress regarding the CPA laser.

In this paper, we report the recent progress on the $1~\text{PW}/0.1~\text{Hz}$ laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The SULF-1 PW laser beamline is based on the double chirped pulse amplification (CPA) scheme, which can generate laser pulses of 50.8 J at 0.1 Hz after the final amplifier; the shot-to-shot energy fluctuation of the amplified pulse is as low as 1.2% (std). After compression, the pulse duration of 29.6 fs is achieved, which can support a maximal peak power of 1 PW. The contrast ratio at $-80~\text{ps}$ before main pulse is measured to be $2.5\times 10^{-11}$ . The focused peak intensity is improved by optimizing the angular dispersion in the grating compressor. The maximal focused peak intensity can reach $2.7\times 10^{19}~\text{W}/\text{cm}^{2}$ even with an $f/26.5$ off-axis parabolic mirror. The horizontal and vertical angular pointing fluctuations in 1 h are measured to be 1.89 and $2.45~\unicode[STIX]{x03BC}\text{rad}$ , respectively. The moderate repetition rate and the good stability are desirable characteristics for laser–matter interactions. The SULF-1 PW laser beamline is now in the phase of commissioning, and preliminary experiments of particle acceleration and secondary radiation under 300–400 TW/0.1 Hz laser condition have been implemented. The progress on the experiments and the daily stable operation of the laser demonstrate the availability of the SULF-1 PW beamline.