Understanding the complex nature of wear behavior of materials at high-temperature is of fundamental importance for several engineering applications, including metal processing (cutting, forming, forging), internal combustion engines, etc. At high temperatures (up to 1000 °C), the material removal is majorly governed by the changes in surface reactivity and wear mechanisms. The use of lubricants to minimize friction, wear and flash temperature to prevent seizing is a common approach in engine tribology. However, the degradation of conventional liquid-based lubricants at temperatures beyond 300 °C, in addition to its harmful effects on human and environmental health, is deeply concerning. Solid lubricants are a group of compounds exploiting the benefit of wear diminishing mechanisms over a wide range of operating temperatures. The materials incorporated with solid lubricants are herein called ‘self-lubricating’ materials. Moreover, the possibility to omit the use of conventional liquid-based lubricants is perceived. The objective of the present paper is to review the current state-of-the-art in solid-lubricating materials operating under dry wear conditions. By opening with a brief summary of the understanding of solid lubrication at a high temperature, the article initially describes the recent developments in the field. The mechanisms of formation and the nature of tribo-films (or layers) during high-temperature wear are discussed in detail. The trends and ways of further development of the solid-lubricating materials and their future evolutions are identified.

Friction, wear, and the consequent energy dissipation pose significant challenges in systems with moving components, spanning various domains, including nanoelectromechanical systems (NEMS/MEMS) and bio-MEMS (microrobots), hip prostheses (biomaterials), offshore wind and hydro turbines, space vehicles, solar mirrors for photovoltaics, triboelectric generators, etc. Nature-inspired bionic surfaces offer valuable examples of effective texturing strategies, encompassing various geometric and topological approaches tailored to mitigate frictional effects and related functionalities in various scenarios. By employing biomimetic surface modifications, for example, roughness tailoring, multifunctionality of the system can be generated to efficiently reduce friction and wear, enhance load-bearing capacity, improve self-adaptiveness in different environments, improve chemical interactions, facilitate biological interactions, etc. However, the full potential of bioinspired texturing remains untapped due to the limited mechanistic understanding of functional aspects in tribological/biotribological settings. The current review extends to surface engineering and provides a comprehensive and critical assessment of bioinspired texturing that exhibits sustainable synergy between tribology and biology. The successful evolving examples from nature for surface/tribological solutions that can efficiently solve complex tribological problems in both dry and lubricated contact situations are comprehensively discussed. The review encompasses four major wear conditions: sliding, solid-particle erosion, machining or cutting, and impact (energy absorbing). Furthermore, it explores how topographies and their design parameters can provide tailored responses (multifunctionality) under specified tribological conditions. Additionally, an interdisciplinary perspective on the future potential of bioinspired materials and structures with enhanced wear resistance is presented.

This overview study investigates integrating advanced manufacturing technologies, specifically metal additive manufacturing (AM) and laser powder bed fusion (LPBF) processes, within Industry 4.0 and Industry 5.0 frameworks, to enhance sustainability and efficiency in industrial production and prototyping. The manufacturing sector, a significant contributor to global greenhouse gas emissions and resource consumption, is increasingly adopting technologies that reduce environmental impact while maintaining economic growth. Selective laser melting (SLM), as the subsection LPBF technologies, is highlighted for its capability to produce high-performance, lightweight, and complex components with minimal material waste, thus aligning with circular economy goals for metal alloys. Life cycle assessment (LCA) and life cycle costing (LCC) analyses are essential methods for evaluating the sustainability of any new technology. Sustainable technologies could support the concepts of the factory of the future (FoF), fulfilling the requirements of digital transformation and digital twins. This overview study reveals that implementing AM—specifically SLM—has the potential to reduce the environmental impact of manufacturing. It underscores the ability of these technologies to promote sustainable and efficient manufacturing practices, thereby accelerating the shift from Industry 4.0 to Industry 5.0.

Achieving lightweight, high-strength, and biocompatible composites is a crucial objective in the field of tissue engineering. Intricate porous metallic structures, such as lattices, scaffolds, or triply periodic minimal surfaces (TPMSs), created via the selective laser melting (SLM) technique, are utilized as load-bearing matrices for filled ceramics. The primary metal alloys in this category are titanium-based Ti6Al4V and iron-based 316L, which can have either a uniform cell or a gradient structure. Well-known ceramics used in biomaterial applications include titanium dioxide (TiO₂), zirconium dioxide (ZrO₂), aluminum oxide (Al₂O₃), hydroxyapatite (HA), wollastonite (W), and tricalcium phosphate (TCP). To fill the structures fabricated by SLM, an appropriate ceramic is employed through the spark plasma sintering (SPS) method, making them suitable for in vitro or in vivo applications following minor post-processing. The combined SLM-SPS approach offers advantages, such as rapid design and prototyping, as well as assured densification and consolidation, although challenges persist in terms of large-scale structure and molding design. The individual or combined application of SLM and SPS processes can be implemented based on the specific requirements for fabricated sample size, shape complexity, densification, and mass productivity. This flexibility is a notable advantage offered by the combined processes of SLM and SPS. The present article provides an overview of metal–ceramic composites produced through SLM-SPS techniques. Mg-W-HA demonstrates promise for load-bearing biomedical applications, while Cu-TiO₂-Ag exhibits potential for virucidal activities. Moreover, a functionally graded lattice (FGL) structure, either in radial or longitudinal directions, offers enhanced advantages by allowing adjustability and control over porosity, roughness, strength, and material proportions within the composite.