In the present paper, the torsion and compression behaviors of lattice structures were studied. The PLA (Polylactic Acid) materials were used in assembly and produced by additive manufacturing method. The structure and lattice behaviors were investigated by Digital Image Correlation (DIC) system during experimental study. Models created using three different unit cell model as Trunch Octa Dense, Trunch Octa Light, Body Diagonals With Nodes and two different, 70 mm and 140 mm, total length size. The influence of the unit cell model, cell size on the strength of the structure were studied by compression and torsion experiments. The maximum compressive stress and maximum torsion were obtained and their deformations were presented. The highest maximum torque was determined in Body Diagonals With Nodes cell model and 140 mm due to the fact that the cell model structure compatible with torsion. The highest compressive stress was determined in Trunch Octa Light cell model and 140 mm cell length.
28 January 2022 in Journal of Materials Engineering and Performance
Additive manufacturing of lattice structures offers superior lightweight and energy-absorbing properties across aviation, automotive, and biomedical sectors. However, achieving dimensional precision remains a primary obstacle to ensuring design compatibility and product functionality. To address this challenge, this study introduces a novel comparative analysis of BCC, Diamond, and Octet Truss geometries, specifically focusing on the interplay between infill density and strut thickness. By evaluating PLA-fabricated plates with thicknesses of 0.8 mm, 1 mm, and 1.2 mm through microscopic CAD-to-print comparison, the research identifies critical accuracy thresholds. Findings demonstrate that higher infill ratios significantly enhance structural stability; notably, Octet Truss structures exhibited substantially lower dimensional deviations (0.694%–1.923%) compared to BCC structures (1.25%–3.546%). Furthermore, increasing strut thickness to 1.2 mm reduced deviation rates by up to 50% compared to 0.8 mm struts. These results provide a significant resource for optimizing additive manufacturing parameters, offering new insights into achieving high-precision fabrication for complex lattice systems.
1 March 2023 in Journal of Manufacturing Engineering
Ith the development of the additive manufacturing method, the production of lattice structures with complex geometries attracts increasing attention. These lattice structures can be designed with the desired properties, and they are encountered in many areas such as automotive, aerospace and aviation, and manufacturing industries, as they offer the freedom to control their physical, mechanical and geometric properties. The high strength characteristic of lattice structures that can be designed at any scale makes these structures useful for producing different designs. Since the mechanical responses of the lattice structures depend on the lattice design parameters, such as the large number of independent struts forming the lattice, cell size and cell geometry, the mechanical behaviour of these structures should be examined. In this study, a porous lattice structure with four different cell models, namely Dode Medium, Diamond, Rhombic Dodecahedron, and Dode Thin, was produced by Selective Laser Melting (SLM) method. In order to reveal the mechanical properties and deformation responses of the porous lattice structures, they were analyzed under compression test and by the finite element method, and experimental and numerical procedures were compared. The effect of the compression test on the lattice properties and how the deformation is distributed throughout the lattice structure were investigated. The finite Element Analysis and Digital Image Processing (DIP) method was used to determine how the lattices deform. The results obtained will be useful for designing new metallic lattice structures with more excellent deformation resistance in future studies.
1 January 2025 in Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Eklemeli imalat, karmaşık geometrilere sahip hafif ve yüksek performanslı yapılar üretme imkânı sunan yenilikçi bir üretim teknolojisidir. Bu teknolojinin öne çıkan uygulamalarından biri olan Triply Periodic Minimal Surface (TPMS) yapılar, düşük yoğunluk, yüksek yüzey alanı, enerji emilimi ve mekanik dayanım gibi avantajlar sağlamaktadır. Ancak, eklemeli imalatla üretilen TPMS yapılarının mekanik dayanımı, uygulama gereksinimlerini karşılamakta yetersiz kalabilmektedir. Bu bağlamda karbon fiber kaplama, TPMS yapılarının mekanik dayanımını ve sertliğini artırarak yük taşıma kapasitesini iyileştiren etkili bir çözüm olarak öne çıkmaktadır.Bu çalışma, karbon fiber kaplamalı TPMS kafes yapılarının mekanik performansını incelemiş ve farklı geometrik tasarımların enerji emme kapasitesi, yük taşıma dayanımı ve elastik modül üzerindeki etkilerini değerlendirmiştir. Octet geometrisi, 1250 J enerji emme kapasitesi ve 500 N maksimum yük taşıma dayanımı ile en yüksek performansı sergilerken, elastik modül açısından diğer geometrilere kıyasla daha düşük bir değer göstermiştir. HMK (1100 J, 450 N), YMK (950 J, 400 N) ve Elmas (850 J, 350 N) geometrileri ise dengeli performanslarıyla farklı uygulama alanları için uygun seçenekler sunmaktadır.Sonuç olarak, karbon fiber kaplama, TPMS yapılarının mekanik özelliklerini optimize ederek havacılık, otomotiv, biyomedikal ve enerji gibi sektörlerde hafiflik, dayanıklılık ve çok işlevlilik gerektiren uygulamalarda geniş bir kullanım potansiyeli sunmaktadır.