Burak Dokmetas

Dr. Burak Dokmetas

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

1 May 2015
Verified
Conference Paper
Closed access
ANAtabak Najafi
Atabak Najafi
BDBurak Dokmetas
Burak Dokmetas
IIIres Iskender
Ires Iskender
Transformers illustrate the majority of capital investment in transmission and distribution centers. Additionally, interruptions of power transformer have a significant economic effects on the performance of an electrical network. For this reason, the safe and reliable performance of transformer, directly related to the security and stability of power system. This paper studies the growth of leakage flux and stray losses in the tank wall and core clamp of distribution transformer under unbalanced voltage condition. The computer-based simulation utilizing the three dimensional FEM that improved in Ansoft - Maxwell and surface impedances method as a tool for visualizing the leakage flux and stray losses on tank wall and core clamp of distribution transformers. FEM is one among popular numerical methods that is able to handle problem complexity in various forms.

16 January 2026 in Electronics
Verified
Journal Article
Open access
PDF file
BDBurak Dokmetas
Burak Dokmetas
This study presents the design, optimization, and experimental validation of a dual-band dielectric monopole antenna. The proposed antenna structure consists of three concentric cylindrical dielectric layers, each with independently tunable permittivities and radii. This configuration allows the effective control of electromagnetic performance over distinct frequency bands. To determine the optimal geometric and material parameters, the bio-inspired Honey Bee Mating Optimization (HBMO) algorithm is employed. The optimization process simultaneously maximizes antenna gain and minimizes reflection coefficient in the X and Ku bands. A cost function incorporating both gain and impedance matching criteria is formulated to achieve well-balanced solutions. The final antenna prototype was fabricated using a fused deposition modeling (FDM)-based 3D printer, where the dielectric properties of each layer are adjusted through variable infill rates. Simulated and measured results confirm stable dual-band operation with reflection coefficients below −10 dB, while the maximum in-band realized gains reach approximately 6.6 dBi in the X-band and 7.1 dBi in the Ku-band. These findings demonstrate the effectiveness of the proposed optimization approach and validate the feasibility of using 3D-printed dielectric-loaded structures as an efficient solution for high-frequency and space-constrained communication systems.

17 January 2025 in Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Verified
Journal Article
Open access
PDF file
BDBurak Dokmetas
Burak Dokmetas
Mert KarahanMert Karahan
Mert Karahan
Bu çalışmada, X-bant uygulamaları için ultra kompakt monolitik mikrodalga entegre Wilkinson güç bölücü devresi tasarlanmıştır. Tasarımın boyutunu küçültmek amacıyla minyatürleştirme tekniği kullanılmış ve önerilen tekniğin verileri simülasyon programı ile analiz edilmiştir. Önerilen Wilkinson güç bölücü, galyum nitrür (GaN) entegre pasif cihaz teknolojisi kullanılarak üretilmiştir. Elde edilen ölçüm sonuçlarına göre X bandında (8-12 GHz), giriş ve çıkış (I/O) yansıma katsayılarının -14 dB’den daha iyi olduğu görülmüştür. Aynı frekans aralığında iletim katsayısı ise -4,7 dB’nin üzerinde ölçülmüştür. Çalışmada 10 dB’lik kesirli bant genişliği %47,6 olarak hesaplanmıştır. Monolitik toplu elemanlar ile 𝜋 tipi minyatürleştirme tekniği uygulanarak Wilkinson güç bölücünün boyutu 776 µm x 2240 µm’ye düşürülmüştür. Bu çalışmada önerilen yöntemle, güç bölücü devresi elektriksel performansında herhangi bir bozulma olmadan boyut olarak kompakt hale getirilmiştir.

21 April 2026 in Electronics
Verified
Journal Article
Open access
PDF file
MOMuhammed Yusuf ONAY
Muhammed Yusuf ONAY
BDBurak Dokmetas
Burak Dokmetas
This article presents the experimental characterization of a 3D-printed conformal 2×1 microstrip array antenna designed for 2.4 GHz WiFi backscatter applications in indoor IoT scenarios. Starting from a planar configuration, three conformal states (30∘, 60∘, and 90∘) were realized to systematically evaluate the effect of bending. Detailed simulation and measurement results were obtained in terms of gain, efficiency, and radiation patterns, with the measured gain decreasing from 9.4 dBi in the flat case to 6.2 dBi at 90∘ bending. To evaluate the system-level impact of these measured gain variations, the measured power levels were incorporated into a TDMA-based WiFi backscatter link model, and the achievable bit transmission rate was assessed under practical indoor conditions, including line-of-sight (LoS), non-line-of-sight (NLoS), and residual interference effects. The main contribution of the work lies in combining the experimental validation of a fully 3D-printed RF-grade conformal antenna with a system-level WiFi backscatter assessment. The combined analytical–experimental results indicate that increasing curvature reduces the achievable maximum bit transmission rate and leads to earlier infeasibility under tighter quality of service (QoS) thresholds within the tested 2.4 GHz indoor WiFi backscatter conditions, suggesting that conformal geometry is an important design consideration for the studied setup.

25 September 2024 in Journal of Polytechnic
Verified
Journal Article
Open access
PDF file
BDBurak Dokmetas
Burak Dokmetas
NANursel Akçam
Nursel Akçam
Gelişen uydu haberleşme sistemleri ile birlikte düşük gürültülü kuvvetlendirici (Low Noise Amplifier-LNA) ve alt sistemlerine gösterilen ilgi her geçen gün artmaktadır. Düşük gürültülü kuvvetlendirici alt sistemleri uydu haberleşmesinde düşük güçlü sinyalleri kuvvetlendirerek gürültü seviyesini en düşük seviyede tutmakta önemli bir rol oynamaktadır. Bu çalışma kapsamında, uydu haberleşme uygulamalarında kullanılabilecek 8025-8400 MHz frekans bandına sahip iki katlı düşük gürültülü kuvvetlendirici tasarımı gerçekleştirilmiştir. Tasarımda RT5880 alttaşı üzerine mikroşerit teknolojisi ve CE3512K2 transistörü kullanılmıştır. Tasarımda uyumlama devreleri mikroşerit hatlar ve paketli radyo frekansı (Radio Frequency-RF) malzemeleri ile gerçeklenmiştir. Geliştirilen LNA devresinin S-parametresi ölçüm sonuçlarına göre, giriş ve çıkış geri yansıma katsayıları sırasıyla -14 dB ve -15 dB’den daha iyi olduğu görülmüştür. Ölçülen kazanç değeri ise 21.9 dB’den iyi olarak elde edilmiştir. Ek olarak, 2 katlı LNA devresinin 40 mW güç tükettiği durumda gürültü figürü değerinin çalışma bandı içerisinde 1.1 dB’den düşük olduğu ve 1-dB bastırma noktasındaki çıkış gücünün ise +14.6 dBm olduğu görülmüştür.