Nursel Akçam

Nursel Akçam

Auto-generated profile, based on publicly available information

Nursel Akçam

Gazi Üniversitesi

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 September 2020 in Microwave and Optical Technology Letters
Verified
Journal Article
Closed access
PDF file
GAGalip Orkun Arican
Galip Orkun Arican
NANursel Akcam
Nursel Akcam
EYErdem Yazgan
Erdem Yazgan

1 March 2023 in Gazi University Journal of Science
Verified
Journal Article
Closed access
PDF file
GAGalip Orkun Arican
Galip Orkun Arican
NANursel Akçam
Nursel Akçam
In this article, we demonstrate a low-cost 7.25-7.75 GHz two-stage low noise amplifier with sub-1-dB noise figure for satellite communication applications. The microstrip technology on Rogers RT5880 substrate with the dielectric constant of 2.2 and thickness of 0.508 mm were utilized to develop a low noise amplifier. The printed-circuit-board technology offers a variety of profits such as being low-cost, lighter-weight and re-configurability after the manufacturing process make this technology charming for satellite communication systems for both commercial and military applications. Since the monolithic microwave integrate circuit technology provide much smaller sized circuits and high electrical performance especially at the millimeter-wave frequencies, the printed microstrip technology can be a significant rival to integrated-circuit technology with its proven reliability, easier, cheaper and faster manufacturing process, compactible electrical performance in X-band applications. Moreover, the proposed amplifier was developed with utilizing California Eastern Laboratories’ CE3512K2 transistor on Rogers-RT5880 and surface mount devices were utilized in the matching networks to reduce the size. In addition, the source-generation and interstage matching topologies were implemented to simplify the matching complexity to enhance the noise and gain. The prototype was manufactured with utilizing LPKF prototyping machine. The developed LNA exhibits a measured gain of 23.5±0.5 dB with the noise figure of less than 0.9 dB and input/output return loss better than 11.5 dB in the operating frequency bandwidth. Furthermore, the developed amplifier has a measured carrier to interference of -59 dBc and P1dB of 13 dBm at the center frequency while consuming a total DC power of 50 mW.

1 June 2022 in Gazi University Journal of Science
Verified
Journal Article
Closed access
PDF file
RTReşat TÜZÜN
Reşat TÜZÜN
NANursel Akçam
Nursel Akçam
TOTayfun Okan
Tayfun Okan
This paper introduces a compact microstrip low-pass filter (LPF) with a very sharp rejection. The proposed LPF is designed to be used for electronic warfare in defense industry. It has 62 dB/GHz attenuation rate, 10 GHz of stopband width and 48.6 dB of stopband attenuation. Moreover, it also has a wide passband and has a high cut-off frequency (f_c) of 6 GHz. The designed filter has been fabricated using alumina (Al2O3) substrate and titanium-gold (Ti-Au) coating on top of that with thin film technique in a clean room. The experimental measurements of the proposed LPF show great agreement with the simulation results, which validates that the presented filter is convenient to be used for applications up to C-band in electronic warfare systems.

25 September 2024 in Journal of Polytechnic
Verified
Journal Article
Open access
PDF file
BDBurak Dokmetas
Burak Dokmetas
NANursel Akçam
Nursel Akçam
Gelişen uydu haberleşme sistemleri ile birlikte düşük gürültülü kuvvetlendirici (Low Noise Amplifier-LNA) ve alt sistemlerine gösterilen ilgi her geçen gün artmaktadır. Düşük gürültülü kuvvetlendirici alt sistemleri uydu haberleşmesinde düşük güçlü sinyalleri kuvvetlendirerek gürültü seviyesini en düşük seviyede tutmakta önemli bir rol oynamaktadır. Bu çalışma kapsamında, uydu haberleşme uygulamalarında kullanılabilecek 8025-8400 MHz frekans bandına sahip iki katlı düşük gürültülü kuvvetlendirici tasarımı gerçekleştirilmiştir. Tasarımda RT5880 alttaşı üzerine mikroşerit teknolojisi ve CE3512K2 transistörü kullanılmıştır. Tasarımda uyumlama devreleri mikroşerit hatlar ve paketli radyo frekansı (Radio Frequency-RF) malzemeleri ile gerçeklenmiştir. Geliştirilen LNA devresinin S-parametresi ölçüm sonuçlarına göre, giriş ve çıkış geri yansıma katsayıları sırasıyla -14 dB ve -15 dB’den daha iyi olduğu görülmüştür. Ölçülen kazanç değeri ise 21.9 dB’den iyi olarak elde edilmiştir. Ek olarak, 2 katlı LNA devresinin 40 mW güç tükettiği durumda gürültü figürü değerinin çalışma bandı içerisinde 1.1 dB’den düşük olduğu ve 1-dB bastırma noktasındaki çıkış gücünün ise +14.6 dBm olduğu görülmüştür.

7 August 2026 in Pamukkale University Journal of Engineering Sciences
Verified
Journal Article
Open access
MEMiraç Er
Miraç Er
NANursel Akçam
Nursel Akçam
Context—In recent years, the increasing need for communication due to technological advancements, along with the rise in the number of manufacturers and users, has made the transition to 5th generation (5G) communication systems necessary. This transition to 5G communication has placed new requirements on antenna designs, necessitating the development of antennas with high bandwidth, a low profile, and the ability to support multiple users simultaneously. This paper focused on increasing the bandwidth of multiple input multiple output (MIMO) microstrip antennas and improving the isolation between ports.Objective—This article describes the design and fabrication of a low-profile, high-bandwidth, dual-polarization, four-port, 1×2 array microstrip MIMO antenna for systems operating at 5G frequencies. The designed antenna is manufactured, and its measurement results are compared with simulation results. To enable the proposed design to operate in dual polarization, two ports were placed perpendicular to the edges of the patch antenna. The patches are designed in a square shape to ensure the antenna has linear polarization and exhibits equal characteristics in both horizontal and vertical polarizations. It is aimed at the MIMO antenna to operate at a minimum of 25 GHz - 26 GHz range, linearly in dual polarization, and to have better than -20 dB isolation between ports despite the placement of patch structures with a distance 0.25λ. To increase the antenna bandwidth and improve isolation between ports, the defected ground structure (DGS) method and neutralization line method are employed in the design. The antenna is 2.4 cm × 2.96 cm in size and has 4 ports, achieves a bandwidth of 2.33 GHz with 7 dBi gain at two ports for horizontal polarization, and a bandwidth of 3.5 GHz with 9.18 dBi gain at two ports for vertical polarization. Additionally, the targeted isolation values between ports in the 25 GHz - 26 GHz range are achieved to be better than -20 dB. The designed MIMO antenna is also evaluated in terms of important MIMO parameters such as diversity gain (DG), envelope correlation coefficient (ECC), total active reflection coefficient (TARC), and channel capacity loss (CCL).Method—In the designed antenna, an RT/duroid 5880 substrate with a dielectric constant (εr) of 2.2, a loss tangent (tan δ) of 0.0009, and a thickness of 0.787 mm has been used. A 1 oz (0.035 mm) thick layer of copper was used on both the bottom (grounding plane) and top (radiation area) surfaces of the dielectric material.Results—To minimize the antenna's footprint, the patch structures were placed at a distance 0.25λ apart, while ensuring that the isolation between the ports remains below -20 dB. The bandwidths of the 4-port antenna were measured as 3.89 GHz, 4.72 GHz, 4.35 GHz, and 3.8 GHz respectively. Consistency was observed between the data obtained from measurements and simulation results.Conclusion—CST Microwave Studio simulation software was used for design and simulations.

7 September 2026 in El-Cezeri Fen ve Mühendislik Dergisi
Verified
Journal Article
Open access
BABurak Açıkalın
Burak Açıkalın
NANursel Akçam
Nursel Akçam
BDBurak Dokmetas
Burak Dokmetas
This paper presents the design, fabrication, and experimental validation of a compact microstrip bandpass filter operating at 3.5 GHz for sub-6 GHz 5G wireless communication systems. The proposed filter is realized using a fourth-order Butterworth response implemented through a parallel coupled-line topology, aiming to achieve a maximally flat passband response, low insertion loss, and sufficient selectivity within the n77 frequency band (3.3-3.8 GHz). The design procedure starts with the synthesis of a normalized low-pass Butterworth prototype, followed by bandpass transformation and its implementation as an equivalent distributed microstrip structure. Electromagnetic analysis and parametric optimization are employed to accurately model coupling effects, transmission line behavior, and fabrication constraints. The filter is fabricated on a low-cost FR-4 substrate with a dielectric constant of 4.3 and a thickness of 0.8 mm using standard printed circuit board manufacturing techniques. Experimental characterization is performed using a vector network analyzer to evaluate the frequency response. Measurement results demonstrate a center frequency of 3.5 GHz with an impedance bandwidth of approximately 300 MHz, showing good agreement with the predicted performance. The proposed bandpass filter offers a compact footprint, simple geometry, and reliable frequency response, making it a suitable candidate for integration into 5G radio-frequency front-end modules and other modern wireless communication systems.