The decarbonisation targets of the People’s Republic of China are ambitious. Their achievement relies on the large-scale deployment of variable renewable energy sources (VRES), such as wind and solar. High penetration of VRES may lead to balancing problems on the grid, which can be compensated by increasing the shifting flexibility capacity of the system by integration with energy storage, e.g., by installing additional electricity storage. Pumped Hydro Storage (PHS) is the most diffused electricity storage technology at the global level and the only fully mature solution for long-term electricity storage. China already has the highest PHS capacity installed worldwide and plans to increase it strongly before 2030. The present study, based on the data from the “Pumped Storage Tracking Tool” of the International Hydropower Association, investigates the potential for technological improvement of the existing and future PHS fleet in China. The aims of adopting advanced PHS solutions allow China to better cope with the task of balancing the VRES production. The potential for adopting advanced PHS solutions is evaluated through five different intervention possibilities (here referred to as scenarios). These scenarios consider revamping part of the operational Pumped Storage Plant (PSP) fleet and redesigning future installations that are already planned. As a result, considering all the major technical and authorisation process constraints, 4.0% (5.2 GW) of the 132 GW fleet expected to be commissioned before 2035 could additionally adopt advanced PHS in a high-potential scenario. Meanwhile in the medium and low potential scenarios, the quota can reach 11.1% (14.6 GW) and 26.2% (34.5 GW), respectively. Furthermore, policy recommendations are elaborated to promote, facilitate, and support the adoption of these advanced PHS solutions.

The modernization, efficiency, and decarbonization of the energy supply systems are among the new challenges to be faced in the coming decades to achieve the targets and objectives dictated by European strategic policies. Despite the countless benefits related to renewable energy sources (RES) integration, this brings key challenges to the power system, such as the risk of imbalance between energy generation and demand, sudden changes in flows in transmission lines with a need for expensive and time-consuming upgrades, and the withdrawal of conventional generation systems with consequent demands for new solutions and innovation to support grid services. A potential solution to limit the huge intermittence and fluctuation in power generation from RES is Concentrated Solar Power (CSP) technology integrated with thermal energy storage. The aim of this paper is to discuss the potential benefits related to the use of CSP technology by presenting innovative industrial solutions developed in the Italian SOLARGRID Project, namely the hybridization of CSP–PV systems and the solar thermo-electric system developed by MAGALDI, the parabolic trough collector of Eni, and the new linear Fresnel reflector configuration of IDEA S.r.l. These plant and component solutions are developed for improving the technical performance of CSP technology and reducing the levelized cost of electricity, thereby fostering an effective and massive deployment and encouraging the creation of new business models.

In this study, the energy scenario in China was analyzed by retracing the trend of exponential population growth, gross domestic product (GDP), and electricity production and consumption. A forecast up to 2050 was made based on the history and forecasts of other field studies. It was possible to deduce data on pollutants in terms of CO₂ equivalent (CO₂-eq) emitted over time if there were no changes in the way energy was produced. Moreover, different scenarios were hypothesized for the use of pumped hydroelectricity storage plants, namely 4.5%, 6%, 8%, 11%, and 14% (percentage of electricity compared to requirements in 2050), to balance variable renewable energy sources and avoid curtailment, thereby reducing the use of energy produced by coal-fired plants. For this implementation, direct and indirect costs and benefits were considered, with interesting results obtained from an economic standpoint and very positive results from environmental, social, and territorial perspectives.

In order to reduce greenhouse gas emissions and achieve global decarbonisation, it is essential to find sustainable and renewable alternatives for electricity production. In this context, the development of distributed generation systems, with the use of thermodynamic and photovoltaic solar energy, wind energy and smart grids, is fundamental. ORC power plants are the most appropriate systems for low-grade thermal energy recovery and power conversion, combining solar energy with electricity production. The application of a micro-scale ORC plant, coupled with Parabolic Trough Collectors as a thermal source, can satisfy domestic user demand in terms of electrical and thermal power. In order to develop a micro-scale ORC plant, a commercial hermetic scroll compressor was tested as an expander with HFC-245fa working fluid. The tests required the construction of an experimental bench with monitoring and control sensors. The aim of this study is the description of the scroll performances to evaluate the application and develop optimization strategies. The maximum isentropic effectiveness is reached for an expansion ratio close to the volumetric expansion ratio of the scroll, and machine isentropic effectiveness presents small variations in a wide range of working conditions. The filling factor is always higher than one, due to leakage in the mechanical seals of the scroll or other inefficiencies. This study demonstrates that using a commercial scroll compressor as an expander within an ORC system represents a valid option for such applications, but it is necessary to improve the mechanical seals of the machine and utilize a dedicated control strategy to obtain the maximum isentropic effectiveness.

Since thermal energy for residential applications is a relevant part of the entire energy demand, solar technologies could play an important role in decreasing fossil fuel consumption. A novel small parabolic trough collector matched with a storage system is developed to satisfy heating and required hot water demand for a single house. A new receiver concept is designed and a prototype is realized using two coaxial tubes (three spattered layers). A covering glass with vacuum inside completes the high tech design. Because of numerous innovations including the small size, a specific off-Sun measurement procedure is set up with the aim of evaluating the real thermal loss and direct heating of the absorber by Joule effect. A novel test procedure is proposed for the one-end absorber. The receiver performance results are reported under vacuum conditions and with air at ambient pressure.

The electroluminescence test is an experiment typically used to verify the behavior of the photovoltaic cell and to qualitatively check its integrity. It works by operating the photovoltaic cell as a diode polarized directly: the cells that light up in a module indicate how many of them work. This test provides an estimate of the maximum performance of the entire photovoltaic module. A qualitative inspection was performed by electroluminescence tests on 48 modules of photovoltaic cells. They had already been installed on a small-size concentration solar plant before the test and some modules had reached a lower level of performance than expected. A first electroluminescence test was performed, which showed that only 61.5% of the photocells worked. Since there were visible signs of humidity within the various modules, some of the inoperative modules underwent a dehumidification treatment in a climatic chamber. A second electroluminescence test showed that the percentage of functioning cells had increased to 66.3% after the drying treatment.