Spills involving fuels and lubricating oils in industrial environments caused by the fueling of machines, inadequate storage and the washing of equipment are significant sources of environmental pollution, impacting soil and water bodies. Such incidents alter the microbiological, chemical and physical properties of affected environments. The use of biosurfactants is an effective option for the cleaning of storage tanks and the remediation of contaminated soils and effluents. The scope of this work was to assess the production and application of a Starmerella bombicola ATCC 22214 biosurfactant to remediate marine and terrestrial environment polluted by oil. The production of the biosurfactant was optimized in terms of carbon/nitrogen sources and culture conditions using flasks. The performance of the biosurfactant was tested in clayey soil, silty soil, and standard sand, as well as smooth surfaces and industrial effluents contaminated with oils (fuel oils B1 for thermal power generation, diesel, and motor oil). The ideal culture medium for the production of the biosurfactant contained 2% glucose and 5% glycerol, with agitation at 200 rpm, fermentation for 180 h and a 5% inoculum, resulting in a yield of 1.5 g/L. The biosurfactant had high emulsification indices (86.6% for motor oil and 51.7% for diesel) and exhibited good stability under different pH values, temperatures and concentrations of NaCl. The critical micelle concentration was 0.4 g/L, with a surface tension of 26.85 mN/m. In remediation tests, the biosurfactant enabled the removal of no less than 99% of motor oil from different types of soil. The results showed that the biosurfactant produced by Starmerella bombicola is a promising agent for the remediation of environments contaminated by oil derivatives, especially in industrial environments and for the treatment of oily effluents.

The cosmetics industry has been seeking to develop products with renewable natural ingredients to reduce the use of or even replace synthetic substances. Biosurfactants can help meet this demand. These natural compounds are renewable, biodegradable, and non-toxic or have low toxicity, offering minimal risk to humans and the environment, which has attracted the interest of an emerging consumer market and, consequently, the cosmetics industry. The aim of the present study was to produce a biosurfactant from the yeast Starmerella bombicola ATCC 22214 cultivated in a mineral medium containing 10% soybean oil and 5% glucose. The biosurfactant reduced the surface tension of water from 72.0 ± 0.1 mN/m to 33.0 ± 0.3 mN/m after eight days of fermentation. The yield was 53.35 ± 0.39 g/L and the critical micelle concentration was 1000 mg/L. The biosurfactant proved to be a good emulsifier of oils used in cosmetic formulations, with emulsification indices ranging from 45.90 ± 1.69% to 68.50 ± 1.10%. The hydrophilic–lipophilic balance index demonstrated the wetting capacity of the biosurfactant and its tendency to form oil-in-water (O/W) emulsions, with 50.0 ± 0.20% foaming capacity. The biosurfactant did not exhibit cytotoxicity in the MTT assay or irritant potential. Additionally, an antioxidant activity of 58.25 ± 0.32% was observed at a concentration of 40 mg/mL. The compound also exhibited antimicrobial activity against various pathogenic microorganisms. The characterisation of the biosurfactant using magnetic nuclear resonance and Fourier transform infrared spectroscopy revealed that the biomolecule is a glycolipid with an anionic nature. The results demonstrate that biosurfactant produced in this work has potential as an active biotechnological ingredient for innovative, eco-friendly cosmetic formulations.

Corrosion is the deterioration of metals due to environmental exposure. Commercial inhibitors used to control corrosion often contain heavy metal salts, which are highly toxic to both the environment and human health. A biosurfactant produced by the bacterium Pseudomonas cepacia CCT 6659 was tested as a corrosion inhibitor on carbon steel and galvanized iron surfaces. Matrices based on plant ingredients with different compositions were tested in a laboratory-constructed accelerated corrosion chamber (ACC) simulating a critical maritime atmosphere in conditions of 40 °C, 5% NaCl, and 100% humidity. The most stable matrix was selected for biosurfactant incorporation in different concentrations, expressed as critical micellar concentration (CMC), and was applied to metal surfaces to evaluate its ability to inhibit corrosion. Additionally, to evaluate the potential of the biosurfactant as a low-toxicity corrosion inhibitor additive in paint systems, iron and carbon steel samples were coated with three biosurfactant-containing commercial paints and subjected to critical atmospheric conditions for testing coating effectiveness. The formulation containing vegetable resin as a plasticizer, oleic acid, ethanol, and CaCO₃ was chosen to incorporate the biosurfactant. The addition of the biosurfactant at twice its CMC led to a reduction in carbon steel sample mass loss from 123.6 to 82.2 g/m², while in the galvanized iron plates, the mass loss decreased from 285.9 to 226.7 g/m² at the same biosurfactant concentration. When supplemented with the biosurfactant, the alkyd resin-based paint (A) ensured less mass loss in samples (46.0 g/m²) compared to the control without biosurfactant (58.0 g/m²). Using the paint formulated with oil-based resin (B), the mass loss decreased from 53.0 to 24.1 g/m², while with that based on petroleum derivatives (C), it decreased from 82.2 to 27.6 g/m². These results confirm the feasibility of using biosurfactants in biodegradable coatings, reducing the need for commercial corrosion inhibitors.

Isolated ultrasonic vibrations were used to treat feed water from a 20 bar steam-producing water tube boiler. Physical treatments such as ultrasounds and reverse osmosis (RO) are recommended as the most eco-friendly for this purpose. A novel bench-scale prototype delivering 6 L/h of treated water was designed and built. The ultrasonic atomization of raw water with 1.7 MHz piezoelectric transducers and subsequent humidification and dehumidification of drag airflow was the innovating sequence of operations used as a treatment technique. To ensure greater humidification capacity to the drag air, the energy available from the thermal inertia of the liquid column (raw water) in the prototype vaporization chamber was used to heat this air flow. After a single pass of raw water through the bench-scale prototype, a 98.0% reduction in conductivity and a 99.0% decrease in the content of total dissolved solids were obtained at a drag air temperature of 70 °C. Compared to RO, two of the main advantages of the proposed ultrasonic wave method are the elimination of the use of chemical agents in the pre-treatment phase and a significant reduction in maintenance costs by membrane replacement.

The shift toward sustainable cosmetic systems has become a strategic priority in response to rising environmental pressures, biodiversity loss, and regulatory demands for traceability and responsible sourcing. This review critically examines the Brazilian sustainability model in the cosmetics industry, focusing on three key pillars: (i) traceability and certification of origin aligned with international standards; (ii) community partnerships and equitable value sharing; and (iii) technological innovation tailored to local biodiversity contexts. It synthesizes scientific articles, regulatory documents, and industry reports published mainly between 2005 and 2025, including international certification schemes (COSMOS, ECOCERT, NATRUE, IBD) and Brazilian biodiversity laws. Quantitative export data show that Brazil’s cosmetic industry surpassed US$ 300 million in exports to major markets, emphasizing the global importance of sustainability-driven competitiveness. This study presents a conceptual framework combining biodiversity-based innovation, socio-environmental governance, and certification systems as a unique sustainability pathway distinct from traditional green cosmetic strategies. The review highlights technical challenges such as supply chain traceability, harmonization of international standards, regulatory asymmetries, and the scalability of community-based value chains. The findings indicate that Brazil’s model offers a hybrid sustainability architecture that combines biotechnological innovation, fair-benefit sharing mechanisms, and compliance with international standards. Future research should focus on quantitative impact assessment metrics, life-cycle evaluations of biodiversity-derived ingredients, and mechanisms for regulatory convergence to improve industrial scalability and global market integration.

The development of innovative cosmetic ingredients has driven growing interest in emulsion systems that combine performance, stability, and sustainability. Pickering emulsions can form physically stable systems by adsorbing solid particles at the oil–water interface. In this study, bacterial cellulose nanofibers (CNFs) and nanocrystals (CNCs), obtained via acid hydrolysis, were evaluated as stabilizing agents in Pickering emulsions containing jojoba, castor, and grape seed oils for hair conditioning applications. Structural and physicochemical characterization revealed that CNCs exhibited higher crystallinity, a narrower size distribution, and a higher negative surface charge than CNFs, resulting in enhanced colloidal stability. Emulsion analyses showed that CNCs more effectively reduced interfacial tension and produced smaller, more homogeneous droplets. Stability assessments under pH variation, thermal stress, and storage demonstrated that CNC-stabilized emulsions, particularly with castor oil, maintained stability indices above 95% for up to 60 days, whereas CNF-based systems showed greater sensitivity to environmental conditions. The incorporation of CNCs into a prototype conditioning cream resulted in a creamy texture and improved physical stability without compromising formulation performance. Overall, these results highlight CNCs as robust and efficient stabilizing materials for Pickering emulsions, reinforcing the potential of bacterial nanocellulose in advanced cosmetic formulations.