Diode-pumped multi-mode graded-index (GRIN) fiber Raman lasers provide prominent brightness enhancement both in linear and half-open cavities with random distributed feedback via natural Rayleigh backscattering. Femtosecond laser-inscribed random refractive index structures allow for the sufficient reduction in the Raman threshold by means of Rayleigh backscattering signal enhancement by +50 + 66 dB relative to the intrinsic fiber level. At the same time, they offer an opportunity to generate Stokes beams with a shape close to fundamental transverse mode (LP01), as well as to select higher-order modes such as LP11 with a near-1D longitudinal random structure shifted off the fiber axis. Further development of the inscription technology includes the fabrication of 3D ring-shaped random structures using a spatial light modulator (SLM) in a 100/140 μm GRIN multi-mode fiber. This allows for the generation of a multi-mode diode-pumped GRIN fiber random Raman laser at 976 nm with a ring-shaped output beam at a relatively low pumping threshold (~160 W), demonstrated for the first time to our knowledge.
22 December 2025 in IEEE Journal of Selected Topics in Quantum Electronics
The effect of an additional random reflector providing self-injection locking of an erbium fiber DFB laser on linewidth narrowing is studied. In a hybrid cavity comprising a short artificial fs-inscribed random reflector in combination with a natural Rayleigh reflector in the form of 100-m SMF fiber connected to the DFB laser the effect is greatly enhanced. The instantaneous linewidth narrowing by 2 orders is demonstrated which is in approximate agreement with theoretical estimation. For the long-term linewidth, the narrowing of approximately 3 orders of magnitude is observed. Thus, a compact and stable single-frequency laser with quite narrow linewidth (<5 Hz long term) for a wide range of application has been developed.
We demonstrate the experimental realization of a dome-spectrum apodized chirped fiber Bragg gratings (ACFBGs) inscribed by femtosecond point-by-point technology in a polarization-maintaining (PM) fiber. ACFBGs fabrication method combines two techniques: a fiber translation velocity change-assisted inscription for chirped fiber Bragg gratings (CFBGs) and an energy modulation-based inscription for apodized fiber Bragg gratings (AFBGs). For both CFBG and AFBG writing techniques, inscription parameters (pulse energy, grating length, spectral bandwidth and apodization function) were optimized in SMF-28 fiber. Such a CFBG with 2 nm spectral bandwidth provides a group delay of 0.98 ns, which is equivalent to the dispersion compensation of a 30 km fiber section, thereby mitigating dispersion-induced temporal broadening of pulses. Gaussian apodization function provides a high side lobe suppression ratio (SLSR) of 22 dB for AFBG with a peak reflectivity of 90%. Thus, this optimization of parameters allowed us to fabricate and implement a combined ACFBG with a spectral bandwidth of 1 nm and SLSR of 18 dB in a PM fiber. The implementation of dome-spectrum ACFBGs in a mode-locked fiber laser as both a dispersion component and a spectral filter resulted in enhanced pulse energy and improved performance stability.
2 October 2024 in Sensors and Actuators A: Physical
Multiphoton endomicroscopy (MPEM) has recently become a key development in optical biomedical diagnostics, providing histologically relevant in vivo images that are eliminating both the need for tissue damage during biopsy sampling and the need for dye injections. Due to its ability to visualize structures at the epithelial, extracellular matrix, and subcellular levels, MPEM offers a promising diagnostic method for precancerous conditions and early forms of gastrointestinal (GI) cancer. The high specificity of multiphoton signals—the two-photon fluorescence response of endogenous fluorophores (NADH, FAD), the second-harmonic generation signal from collagen, and others—makes this method a promising alternative to both traditional histology and confocal endoscopy, enabling real-time assessment of metabolic status, intestinal epithelial cell status, and stromal remodeling. Despite the promising prospects of multiphoton microscopy, its practical implementation is progressing extremely slowly. The main factors here include the difficulty of delivering ultrashort pulses with high peak power, which is necessary for multiphoton excitation (MPE), and obtaining these pulses at the required wavelengths to activate the autofluorescence mechanism. One of the most promising solutions is the use of specialized multimode optical fibers that can both induce beam self-cleaning (BSC), which allows for the formation of a stable beam profile close to the fundamental mode, and significantly broaden the optical spectrum, which can ultimately cover the entire region of interest. This review presents the biophysical foundations of multiphoton microscopy of GI tissue, existing endoscopic architectures for MPE, and an analysis of the potential for using novel nonlinear effects in multimode optical fibers, such as the BSC effect and supercontinuum generation. It is concluded that the use of optical fibers in which the listed effects are realized in the tracts of multiphoton endomicroscopes can become a key step in the creation of a new generation of high-resolution instruments for the early detection of malignant neoplasms of the GI tract.