In this paper, an image-based micromechanical model for an asphalt mixture’s rheological mechanical response is introduced. Detailed information on finite element (FE) modeling based on X-ray computed tomography (X-ray CT) is presented. An improved morphological multiscale algorithm was developed to segment the adhesive coarse aggregate images. A classification method to recognize the different classifications of the elemental area for a confining pressure purpose is proposed in this study. Then, the numerical viscoelastic constitutive formulation of asphalt mortar in an FE code was implemented using the simulation software ABAQUS user material subroutine (UMAT). To avoid complex experiments in determining the time-dependent Poisson’s ratio directly, numerous attempts were made to indirectly obtain all material properties in the viscoelastic constitutive model. Finally, the image-based FE model incorporated with the viscoelastic asphalt mortar phase and elastic aggregates was used for triaxial compressive test simulations, and a triaxial creep experiment under different working conditions was conducted to identify and validate the proposed finite element approach. The numerical simulation and experimental results indicate that the three-dimensional microstructural numerical model established can effectively analyze the material’s rheological mechanical response under the effect of triaxial load within the linear viscoelastic range.
For promoting modifying application of sprayed polyurea (SPUA) in asphalt pavement materials, the effects of sprayed polyurea materials on high-temperature and fatigue performance of asphalt binders were investigated from different aspects. First, the optimal preparation parameters of sprayed-polyurea-modified asphalt binders (SPMAs) were determined by designing an orthogonal test. Then, the high-temperature and fatigue properties of sprayed-polyurea-modified asphalt binders with different contents were characterized by rheological testing methods, including Brookfield rotary viscosity (RV) test, performance grading (PG) test, multiple stress creep recover (MSCR) test, linear amplitude sweep (LAS) test and time sweeping (TS) test. Finally, the thermal properties of the asphalt binders were analyzed by differential scanning calorimetry (DSC) test. The results showed that the optimum preparation parameters were determined by the extreme difference analysis method and analysis of variance (ANOVA) method, and the shearing time was 40 min, the shearing rate was 6000 rpm and the shearing temperature was 150 °C. Sprayed polyurea positively affected high-temperature performance of asphalt binders and could improve fatigue resistance of asphalt binders. Moreover, the Brookfield rotary viscosity test, multiple stress creep recover test and linear amplitude sweep test had high sensitivity to the performance of sprayed-polyurea-modified asphalt binder, which could help to distinguish the effect of sprayed polyurea dosing on performance of asphalt binders accurately. The differential scanning calorimetry test showed that sprayed polyurea was beneficial to high-temperature stability of asphalt binders, which explains the reason why sprayed-polyurea-modified asphalt binders have excellent high-temperature performance from a microscopic perspective.
22 May 2017 in International Journal of Civil Engineering
Accurate prediction of asphalt mixture density is critical for quality control in pavement engineering. This study develops a novel dielectric-based predictive framework by applying the Lichtenecker–Rother (L-R) dielectric mixing theory to asphalt composites. The model’s key microstructural parameter, the geometric arrangement factor c, was optimized to 0.3 using a combined experimental dataset: laboratory measurements on AC (asphalt concrete) mixtures produced in this study, supplemented with published data from open-graded friction course (OGFC), stone mastic asphalt (SMA), and asphalt mixture (AM) types reported in the literature. The resulting model, termed the Geometric Arrangement Optimization (GAO) model, was systematically compared against three established dielectric models: the complex refractive index method (CRIM), the Rayleigh mixing model, and the Bottcher-type model adapted by Leng et al. (denoted ALL). Validation on a total of 34 sets of laboratory specimens showed that GAO achieved the highest prediction accuracy, with a mean relative error of 1.83% and a coefficient of determination R2 of 0.91. When tested on eight independent field cores, GAO maintained reliable performance, yielding a mean relative error of 3.01%. These results indicate that the GAO model provides a physically grounded and practically applicable approach for asphalt mixture density estimation, contributing a useful tool for pavement performance evaluation and quality assurance.