Magnetic flux leakage (MFL), a widely used nondestructive evaluation (NDE) method, for inspecting pipelines to prevent potential long-term failures. However, during field testing, uncertainties can affect the accuracy of the inspection and the decision-making process regarding damage conditions. Therefore, it is essential to identify and quantify these uncertainties to ensure the reliability of the inspection. This study focuses on the uncertainties that arise during the inverse NDE process due to the dynamic magnetization process, which is affected by the relative motion of the MFL sensor and the material being tested. Specifically, the study investigates the uncertainties caused by sensing liftoff, which can affect the output signal of the sensing system. Due to the complexity of describing the forward uncertainty propagation process, this study compared two typical machine learning (ML)-based approximate Bayesian inference methods, convolutional neural network and deep ensemble, to address the input uncertainty from the MFL response data. Besides, an autoencoder method is applied to tackle the lack of experimental data for the training model by augmenting the dataset, which is constructed with the pre-trained model based on transfer learning. Prior knowledge learned from large simulated MFL signals can fine-tune the autoencoder model which enhances the subsequent learning process on experimental MFL data with faster generalization. The augmented data from the fine-tuned autoencoder is further applied for ML-based defect size classification. This study conducted prediction accuracy and uncertainty analysis with calibration, which can evaluate the prediction performance and reveal the relation between the liftoff uncertainty and prediction accuracy. Further, to strengthen the trustworthiness of the prediction results, the decision-making process guided by uncertainty is applied to provide valuable insights into the reliability of the final prediction results. Overall, the proposed framework for uncertainty quantification offers valuable insights into the assessment of reliability in MFL-based decision-making and inverse problems.
Stainless steel is used in many applications because of its excellent mechanical properties at elevated temperatures. Material fatigue is a major problem in steel structures and can cause catastrophic damage resulting in significant economic consequences. Conventional nondestructive evaluation techniques can detect macro defects but do not perform well when it comes to material degradation due to fatigue, which happens at a microstructure level. It is well known that stress applied on a material will have an impact on the microstructure and produces a change in the magnetic properties of the material. Hence, magnetic nondestructive evaluation techniques that are sensitive to changes in magnetic properties play a major role in the early-stage fatigue detection, i.e., before the macro crack initiates. This paper introduces the magnetic Barkhausen noise technique to garner information about fatigue state of the material under test. K-medoids clustering algorithm and genetic optimization algorithm are used to classify the stainless-samples into fatigue categories. The results prove that martensitic grade stainless-steel samples in different stages of fatigue can be classified into broad fatigue categories, i.e., low fatigue, mid fatigue, and high fatigue based on the remaining useful life of the sample.