Anton Vladislavovich Abramov

Mr. Anton Vladislavovich Abramov


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
STSofya Mikhailovna Terekhova
Sofya Mikhailovna Terekhova
AIAlex Ivannikov
Alex Ivannikov
AAAnton Vladislavovich Abramov
Anton Vladislavovich Abramov
VKVeronika Kirillova
Veronika Kirillova
VMVladimir Mikhalchik
Vladimir Mikhalchik
OSOleg Sevryukov
Oleg Sevryukov
Four compositions of rapidly quenched ribbon brazing alloys based on Ag–Cu–Ti (Ag–26.5Cu–1.5Ti, Ag–25Cu–5Ti) and Ag–Cu–Zr (Ag–26.5Cu–1.5Zr, Ag–25Cu–5Zr) systems were produced. Initial ingots were synthesized by arc melting. Rapidly solidified ribbons, 50–100 μm thick, were then fabricated from homogenized ingots using a “Crystall-702” facility. A comparative analysis of the microstructure and phase composition of both the ingots and ribbons was conducted using scanning electron microscopy and X-ray diffraction. The analysis revealed the presence of Cu4Ti and CuTi intermetallic compounds in the Ag–Cu–Ti alloys, and AgCu4Zr and Zr2Cu in the Ag–Cu–Zr alloys. Rapid quenching was found to produce metastable structures and significantly refine the intermetallic phases. Microhardness measurements of the ingot and ribbon states demonstrated a substantial influence of the processing route on the mechanical properties. The tensile strength of the ingots was also evaluated. The wetting angles of the rapidly quenched alloy melts on 99% Al2O3 (alumina) ceramic substrates under vacuum were determined. All produced ribbons, except for the Ag–26.5Cu–1.5Zr composition, demonstrated adequate wettability. Thus, these materials are considered promising for further research into heat-resistant metal–ceramic joints.

11 December 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
STSofya Mikhailovna Terekhova
Sofya Mikhailovna Terekhova
AIAlex Ivannikov
Alex Ivannikov
AAAnton Vladislavovich Abramov
Anton Vladislavovich Abramov
VKVeronika Kirillova
Veronika Kirillova
VMVladimir Mikhalchik
Vladimir Mikhalchik
OSOleg Sevryukov
Oleg Sevryukov
Four compositions of rapidly quenched ribbon brazing alloys based on the Ag-Cu-Ti (Ag-26.5Cu-1.5Ti, Ag-25Cu-5Ti) and Ag-Cu-Zr (Ag-26.5Cu-1.5Zr, Ag-25Cu-5Zr) sys-tems were produced. Initial ingots were synthesized by arc melting. Rapidly solidified ribbons, 50-100 μm thick, were then fabricated from homogenized ingots using a "Crystall-702" facility. A comparative analysis of the microstructure and phase com-position of both the ingots and ribbons was conducted using scanning electron mi-croscopy and X-ray diffraction. The analysis revealed the presence of Cu4Ti and CuTi intermetallic compounds in the Ag-Cu-Ti alloys, and AgCu4Zr and Zr2Cu in the Ag-Cu-Zr alloys. Rapid quenching was found to produce metastable structures and significantly refine the intermetallic phases. Microhardness measurements of the ingot and ribbon states demonstrated a substantial influence of processing route on me-chanical properties. The tensile strength of the ingots was also evaluated. Wetting an-gles of the rapidly quenched alloy melts on 99% Al2O3 (alumina) ceramic substrates under vacuum were determined. All produced ribbons, except for the Ag-26.5Cu-1.5Zr composition, demonstrated adequate wettability. Thus, these materials are considered promising for further research into heat-resistant metal-ceramic joints.