Two acid thickeners, ADMC and ADOM, were prepared by aqueous solution polymerization using acrylamide (AM) and methacryloyloxyethyl trimethyl ammonium chloride (DMC) as raw materials, with or without the introduction of octadecyl polyoxyethylene ether methacrylate (OEMA). It was characterized by FTIR, 1H NMR, and the fluorescence spectra of pyrene. The double-layer thickening mechanism of ADOM was proved by comparing the thickening and rheological properties of ADMC and ADOM tested by a six-speed rotary viscometer and a HAKKE MARSIV rheometer during the acidification process. The results showed that the synthetic product was the target product; the first stage of the self-thickening ADOM fresh acid solution during high-temperature acidification was mainly affected by Ca2+ concentration, and the second stage of self-thickening was mainly affected by temperature. The residual viscosity of the 0.8 wt% ADOM residual acid solution was 250, 201.5, and 61.3 mPa·s, respectively, after shearing at 90, 120, and 150 °C for 60 min at a shear rate of 170 s−1. The thickening acid ADOM with a hydrophobic association structure has good temperature resistance and shear resistance, which can be used for high-temperature deep-well acid fracturing. In addition, no metal crosslinking agent was introduced in the system to avoid damage to its formation, and ADOM exhibited good resistance to Ca2+, which could provide ideas for the reinjection of the acidizing flowback fluid. It also has certain advantages for environmental protection.
Using acrylamide, methacryloyloxyethyl trimethyl ammonium chloride, and 2-acrylamido-2-methylpropanesulfonic acid as raw materials, an amphoteric ionic self-thickening acid ADAM was prepared. The viscosity changes of ADAM during the acid-rock reaction process were studied, demonstrating that the self-thickening behavior of ADAM depends on the concentration of Ca 2+ in the solution. Specifically, the ADAM acid solution demonstrated a post-reaction viscosity increase of 110 mPa s, representing a rise of 183%. Temperature and shear resistance of the residual acid solutions were examined using the HAKKE MARS IV. After 1 hour of shear, ADAM retained viscosities of 123, 83, and 28 mPa s at 90, 120, and 150 °C, respectively. These values exceed those of the ADC system by 162%, 295%, and 211% under identical conditions. The ADAM formulation exhibits effective self-thickening capability, and its robust temperature and shear stability support its potential for large-scale application in high-temperature carbonate reservoirs.
The structures and properties of hydrophobic association polymers can be controlled using micelles. In this work, we synthesize a reactive hydrophobic surfactant monomer, KS-3, from oleic acid, N,N-dimethylpropylenediamine, and allyl chloride. A strong synergistic effect between KS-3 and cocamidopropyl betaine in aqueous solution enhances the hydrophilic dispersibility of KS-3, thereby transforming spherical micelles into cylindrical micelles. KS-3 was grafted onto a polyacrylamide chain via aqueous free-radical polymerization to obtain RES, a hydrophobic association polymer. Structural analysis revealed that the RES polymers assembled in wormlike micelles were more tightly arranged than those assembled in spherical micelles, resulting in a compact network structure in water, smooth surface, and high thermal stability. Rheological tests revealed that the synthesized polymers with wormlike and spherical micelles exhibited shear-thinning properties along with different structural strengths and viscoelasticities. Therefore, controlling the micellar state can effectively regulate the polymer properties. The polymers obtained through wormlike micelle polymerization have potential applications in fields with high demands, such as drug release, water purification, and oilfield development.