High penetration of distributed photovoltaic (PV) generation has transformed active distribution networks into inverter-dominated systems, where maintaining voltage stability, minimizing power losses, and maximizing renewable utilization under uncertainty remain significant challenges. Conventional centralized optimal power flow (OPF) and ADMM-based distributed optimization methods suffer from scalability limitations, high computational latency, and reliance on accurate system models, while single-agent reinforcement learning approaches such as PPO struggle with non-stationarity and lack of coordination in multi-inverter settings. To address these limitations, this paper proposes a coordinated control framework based on Multi-Agent Proximal Policy Optimization (MAPPO) for photovoltaic inverter clusters. By adopting centralized training with decentralized execution, the proposed approach enables effective coordination among heterogeneous inverter agents while preserving real-time autonomy. The framework explicitly incorporates network-level objectives, inverter operational constraints, and stochastic irradiance and load uncertainties, allowing agents to learn adaptive and robust control strategies. Simulation studies on a modified IEEE 33-bus active distribution network demonstrate that the proposed MAPPO-based method reduces voltage deviations by more than 40%, decreases network losses by approximately 25%, and lowers photovoltaic curtailment ratios by nearly 50% compared with centralized optimization approaches. In addition, MAPPO achieves significantly faster and more stable convergence than independent PPO under highly variable operating conditions.b These results indicate that MAPPO provides a scalable and resilient alternative to conventional optimization and single-agent learning methods, offering a practical pathway to enhance hosting capacity, operational robustness, and renewable integration in future active distribution networks.
The mismatch between the DC voltage control bandwidth and the low-pass filter control bandwidth results in a non-virtual inertia phenomenon in the DC voltage of the DC microgrid. For this purpose, a transfer function model of the DC microgrid is established in this paper, and the causes of the non-virtual inertia phenomenon are explained from the perspective of control bandwidth. Secondly, a virtual inertia response criterion based on control bandwidth matching is presented in this paper. Then, the concept and solution method of the control bandwidth matching domain are also provided in this paper. This control bandwidth matching domain can not only effectively ensure the virtual inertia characteristics of the DC microgrid but also be used to evaluate the system’s virtual inertia strength under different low-pass filter control bandwidths. Experimental results show that when the ratio of the voltage control bandwidth to the low-pass filter control bandwidth is greater than 10, the DC microgrid presents virtual inertia characteristics; otherwise, it exhibits non-virtual inertia (damped oscillation) characteristics.